Some tweaks and cleanups for the DaVinci IRQ framework:

  - Don't bother storing a table of integers in SRAM and using it during
    IRQ dispatch.  Just do math on the IRQENTRY register to get the irq
    number with fewer and faster instructions, freeing that SRAM.

  - Provide a mechanism to use IRQ prioritization, and to let boards set it
    up as appropriate for the product at hand; there's a default mapping.
    (This approach to handling IRQ priorities, and the initial table, is
    modeled on how AT91 does this.)

  - Comment out declarations of bogus or reserved (per docs) IRQs.

  - Minor fixes to genirq setup:  only handle the AINTC irqs here; use
    genirq-style dispatcher names; and cleanup by merging both routines.

I'm certain the default irq priority table could stand tweaking.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

For the EVM's RTC, include a warning about how hours 12-23 are
misreported ... the only way to really resolve this involves
fixing the MSP430 firmware to include an AM/PM indicator.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

Prevent build errors when MTD physmap is not defined, e.g. for IDE rootfs.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

Use virtual addresses directly instead of physical addresses to
avoid having to recalculate the virtual address with every
register access.
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Useful for debugging power management code.
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Tighten up error handling in the procfs dump, and avoid returning
bogus values from the read() system call.  Report single vs double
buffering for FIFO setup.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

 - Remove an oops in the queue fault cleanup path, caused by using the
   wrong giveback routine (heavy weight vs lighter-weight).  Move a few
   key bits of code into that lighter weight version.

 - Trigger that lighter-weight cleanup during URB completion, when the
   URB in question can't yet been handed off to the hardware even if
   it's at the queue head.

 - Reduce syslog noise when those fault cleanup paths are triggered from
   scatterlist calls by usb-storage.

 - Paranoia: when scheduling, insist that the endpoint fifo isn't smaller
   than required.

Oops observed courtesy of a slightly flakey usb-storage device, which
once again proves itself handy for testing.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

 - Remove #ifdefs in favor of new is_cppi_enabled() macro.
 - Trim some tx-start logic, inlining it and removing MGC_{Read,Write}Csr16()
 - Remove remnant of bogus/non-existent host-side ISO bitfield.

For upstream merging, more such #ifdeffery still needs to be removed.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

 - Add header needed for DaVinci build.
 - Remove some partially obsolete comments.
 - Cleaner and more reproducible host side VBUS handling, including
   waiting for it to fall after powerdown on rmmod.
 - Tighten up various state machine transitions and diagnostics

Plus removing some generic #ifdeffery.  The vbus updates make it work more like
the TUSB code, and the cleanups etc make upstream merging more practical.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

When you're willing to trust the USB host not to commit certain errors, the
CPPI "rndis" RX mode can be used with the peripheral side g_ether driver.
(In other cases, rndis rx mode tends to misbehave _very_ rudely ...)

This patch adds a heuristic to detect when the safe scenario is likely, and
a module parameter to disable the heuristic in contexts when it's likely
to fail; for example, users of gadgetfs will likely need to disable it.

This gave about a 60% improvement in throughput with CDC Ethernet (!!) and a
slight reduction in CPU load.  That's measured with TTCP, which pushes a lot
of full size Ethernet frames and thus can see three IRQs per packet reduced
to just one, and also get I/O overlap when double buffering packets.  That is,
net 10 MByte/sec sustained, using double buffering but no DMA transfer queues;
it's unclear why TX is still just 6 MByte/sec.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

<linux/config.h> automatically gets included by kbuild
Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

General update of the board file for Palm Tungsten E. Registers the
platform devices contained in the PDA (ROM chip, keypad, infra-red)
and updates the configuration for USB and MMC, whose config values
were previously guessed in most cases due to lack of documentation
(and now are confirmed by a number of users). Macros for GPIO pins are
moved to a file in include/asm-arm/arch-omap.
Signed-off-by: Andrzej Zaborowski <balrog@zabor.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Disable accesses to SOFT_REQ_REG2 and ULPD_SOFT_DISABLE_REQ_REG
registers for 15xx processors that don't have these registers. Enable
level 2 interrupt handler for processors that identify as OMAP 15xx
(e.g 310) and not 1510 specifically. Also fix the following compiler
warning (only visible with CONFIG_OMAP_RESET_CLOCKS):

arch/arm/mach-omap1/clock.c: In function 'omap1_clk_disable_unused':
arch/arm/mach-omap1/clock.c:634: warning: 'return' with a value, in
function returning void
Signed-off-by: Andrzej Zaborowski <balrog@zabor.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

The APLLs are most efficiently idled by hardware.
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

DSP HW-related initialization is deferred until the first DSP device
node is opened. This allows us to keep DSP powered down before the
DSP SW is loaded.
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Sync timer32k code with mainline
Signed-off-by: Tony Lindgren <tony@atomide.com>

These can be static now that CONFIG_OMAP_RESET_CLOCKS
is rearranged.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Nokia770-specific part
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

DSP needs to control some board-specific peripheral devices (GPT,
audio, mbox, etc.) through dspgw kfunc commands.
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

- use device model for IRQ detection.
- use "dsp_device" as a pointer for "struct device"
- some whitespaces are cleaned up.
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Mailbox is restructured as below:

- OMAP1 and OMAP2 parts split out to mach-omap[1-2] respectively.
- struct mbx isolation
- Introduced device model
- Added class interface

Moved omap[1,2] specific parts in mach-omap[1,2]/
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

mailbox log small clean-up
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Add dsp clock autoidle(DSP_FCLK, DSP_ICLK, INT_D_FCLK, INT_D_ICLK).
which are controled together by auto-control mode.
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

- cleanup whitespaces
- fix some build errors
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Here's the patch that updates DSP Gateway driver to 3.3.1, that
supports omap2 DSP. It also contains generic mailbox interface
considering IVA use on 2420, but this patch itself doesn't contain any
IVA driver.

Regarding omap2, this code is tested only on our 2420 custom board, so
feedbacks from testing on other chips / boards will be greatly
appreciated.
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

BUG() if the clock use count is already zero.
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>