- 06 May, 2010 18 commits
-
-
Michal Simek authored
PCI_DMA_FROMDEVICE should call invalidation not flushing. Signed-off-by: Michal Simek <monstr@monstr.eu>
-
Michal Simek authored
Microblaze cacheline length is configurable and current cpu uses two cacheline length 4 and 8. We are taking conservative maximum value to be sure that cacheline alignment is satisfied for all cases. Here is the calculation for cacheline lenght 8 32bit=4Byte values which is corresponding with SHIFT 5. Signed-off-by: Michal Simek <monstr@monstr.eu>
-
Michal Simek authored
Show cache line length in /proc/cpuinfo. Signed-off-by: Michal Simek <monstr@monstr.eu>
-
Michal Simek authored
Based on PowerPC patche 52142e75 PowerPC description: On platforms doing non-coherent DMA (4xx, 8xx, ...), it's important that the kmalloc minimum alignment is set to the cache line size, to avoid sharing cache lines between different objects, so that DMA to one of the objects doesn't corrupt the other. Signed-off-by: Michal Simek <monstr@monstr.eu>
-
Michal Simek authored
Copy & paste error. Signed-off-by: Michal Simek <monstr@monstr.eu>
-
Michal Simek authored
This patch fix consistent code which had problems with consistent_free function. I am not sure if we need to call flush_tlb_all after it but it keeps tlbs synced. I added noMMU and MMU version together. Uncached shadow feature is not tested. Signed-off-by: Michal Simek <monstr@monstr.eu>
-
Michal Simek authored
Based on af407c6d and f41b1771Signed-off-by: Michal Simek <monstr@monstr.eu>
-
Michal Simek authored
Remove ancient macros which are here from Linux-2.4 Signed-off-by: Michal Simek <monstr@monstr.eu>
-
Michal Simek authored
Current implementation doesn't handle dcache_line_length correctly that's why is better to use generic memcpy. Cache optimized function could be good way howto improve performance but must be based on benchmarking not blind function like this. Signed-off-by: Michal Simek <monstr@monstr.eu>
-
Nick Piggin authored
As explained in commit 1c0fe6e3, we want to call the architecture independent oom killer when getting an unexplained OOM from handle_mm_fault, rather than simply killing current. Cc: microblaze-uclinux@itee.uq.edu.au Cc: Michal Simek <monstr@monstr.eu> Cc: linux-arch@vger.kernel.org Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michal Simek <monstr@monstr.eu>
-
Randy Dunlap authored
Fix divide exception message to say "divide by zero". Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Michal Simek <monstr@monstr.eu> Cc: microblaze-uclinux@itee.uq.edu.au Signed-off-by: Michal Simek <monstr@monstr.eu>
-
Michal Simek authored
It is necessary for several drivers. Signed-off-by: Michal Simek <monstr@monstr.eu>
-
Michal Simek authored
I found several function which we don't use that's why I am removing them. Signed-off-by: Michal Simek <monstr@monstr.eu>
-
Michal Simek authored
Remove section mismatch - based on ppc aproach. WARNING: vmlinux.o(.text+0x64834): Section mismatch in reference from the function __pte_alloc_kernel() to the function .init.text:early_get_page() The function __pte_alloc_kernel() references the function __init early_get_page(). This is often because __pte_alloc_kernel lacks a __init annotation or the annotation of early_get_page is wrong. Signed-off-by: Michal Simek <monstr@monstr.eu>
-
Steven J. Magnani authored
_start is located in .text, which causes mismatch warnings with machine_early_init() and start_kernel() in .init.text. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
-
Steven J. Magnani authored
Function traces on Microblaze don't include IRQ entry and exit arrows, i.e. 0) | memcpy_toiovec() { 0) ==========> | 0) | do_IRQ() { ... 0) <========== | 0) ! 5414.000 us | } ...because do_IRQ() doesn't have the proper attributes. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
-
Michal Simek authored
This change should be part of b26b2d49 Origin description: resource/PCI: align functions now return start of resource As suggested by Linus, align functions should return the start of a resource, not void. An update of "res->start" is no longer necessary. Signed-off-by: Michal Simek <monstr@monstr.eu>
-
Michal Simek authored
This change should be part of 89a74ecc Origin description: PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs No functional change; this converts loops that iterate from 0 to PCI_BUS_NUM_RESOURCES through pci_bus resource[] table to use the pci_bus_for_each_resource() iterator instead. This doesn't change the way resources are stored; it merely removes dependencies on the fact that they're in a table. Signed-off-by: Michal Simek <monstr@monstr.eu>
-
- 05 May, 2010 22 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6Linus Torvalds authored
* 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: [MTD] Remove zero-length files mtdbdi.c and internal.ho
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_pcmcia / ide-cs: Fix bad hashes for Transcend and kingston IDs libata: Fix several inaccuracies in developer's guide
-
Jeff Garzik authored
Both were "removed" in commit a33eb6b9. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Kristoffer Ericson authored
This patch fixes the bad hashes for one Kingston and one Transcend card. Thanks to komuro for pointing this out. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Sergei Shtylyov authored
Commit 6bfff31e (libata: kill probe_ent and related helpers) killed ata_device_add() but didn't remove references to it from the libata developer's guide. Commits 9363c382 (libata: rename SFF functions) and 5682ed33 (libata: rename SFF port ops) renamed the taskfile access methods but didn't update the developer's guide. Commit c9f75b04 (libata: kill ata_noop_dev_select()) didn't update the developer's guide as well. The guide also refers to the long gone ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), and ata_mmio_data_xfer() -- replace those by the modern ata_sff_data_xfer_noirq(), ata_sff_data_xfer(), and ata_sff_data_xfer32(). Also, remove the reference to non-existant ata_port_stop()... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6Linus Torvalds authored
* 'slab-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slub: Fix bad boundary check in init_kmem_cache_nodes()
-
Zhang, Yanmin authored
Function init_kmem_cache_nodes is incorrect when checking upper limitation of kmalloc_caches. The breakage was introduced by commit 91efd773 ("dma kmalloc handling fixes"). Acked-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
-
Linus Torvalds authored
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: KEYS: call_sbin_request_key() must write lock keyrings before modifying them KEYS: Use RCU dereference wrappers in keyring key type code KEYS: find_keyring_by_name() can gain access to a freed keyring
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: flush_delayed_work: keep the original workqueue for re-queueing
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: FEC: Fix kernel panic in fec_set_mac_address. ipv6: Fix default multicast hops setting. net: ep93xx_eth stops receiving packets drivers/net/phy: micrel phy driver dm9601: fix phy/eeprom write routine ppp_generic: handle non-linear skbs when passing them to pppd ppp_generic: pull 2 bytes so that PPP_PROTO(skb) is valid net: fix compile error due to double return type in SOCK_DEBUG net/usb: initiate sync sequence in sierra_net.c driver net/usb: remove default in Kconfig for sierra_net driver r8169: Fix rtl8169_rx_interrupt() e1000e: Fix oops caused by ASPM patch. net/sb1250: register mdio bus in probe sctp: Fix skb_over_panic resulting from multiple invalid parameter errors (CVE-2010-1173) (v4) p54pci: fix bugs in p54p_check_tx_ring
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda: Fix 0 dB for Packard Bell models using Conexant CX20549 (Venice) ALSA: hda - Add quirk for Dell Inspiron 19T using a Conexant CX20582 ALSA: take tu->qlock with irqs disabled ALSA: hda: Use olpc-xo-1_5 quirk for Toshiba Satellite P500-PSPGSC-01800T ALSA: hda: Use olpc-xo-1_5 quirk for Toshiba Satellite Pro T130-15F ALSA: hda - fix array indexing while creating inputs for Cirrus codecs ALSA: es968: fix wrong PnP dma index
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: joydev - allow binding to button-only devices Input: elantech - ignore high bits in the position coordinates Input: elantech - allow forcing Elantech protocol Input: elantech - fix firmware version check Input: ati_remote - add some missing devices from lirc_atiusb Input: eeti_ts - cancel pending work when going to suspend Input: Add support of Synaptics Clickpad device Revert "Input: ALPS - add signature for HP Pavilion dm3 laptops" Input: psmouse - ignore parity error for basic protocols
-
Dan Williams authored
The raid6 recovery code should immediately drop back to the optimized synchronous path when a p+q dma resource is not available. Otherwise we run the non-optimized/multi-pass async code in sync mode. Verified with raid6test (NDISKS=255) Applies to kernels >= 2.6.32. Cc: <stable@kernel.org> Acked-by: NeilBrown <neilb@suse.de> Reported-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
call_sbin_request_key() creates a keyring and then attempts to insert a link to the authorisation key into that keyring, but does so without holding a write lock on the keyring semaphore. It will normally get away with this because it hasn't told anyone that the keyring exists yet. The new keyring, however, has had its serial number published, which means it can be accessed directly by that handle. This was found by a previous patch that adds RCU lockdep checks to the code that reads the keyring payload pointer, which includes a check that the keyring semaphore is actually locked. Without this patch, the following command: keyctl request2 user b a @s will provoke the following lockdep warning is displayed in dmesg: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- security/keys/keyring.c:727 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by keyctl/2076: #0: (key_types_sem){.+.+.+}, at: [<ffffffff811a5b29>] key_type_lookup+0x1c/0x71 #1: (keyring_serialise_link_sem){+.+.+.}, at: [<ffffffff811a6d1e>] __key_link+0x4d/0x3c5 stack backtrace: Pid: 2076, comm: keyctl Not tainted 2.6.34-rc6-cachefs #54 Call Trace: [<ffffffff81051fdc>] lockdep_rcu_dereference+0xaa/0xb2 [<ffffffff811a6d1e>] ? __key_link+0x4d/0x3c5 [<ffffffff811a6e6f>] __key_link+0x19e/0x3c5 [<ffffffff811a5952>] ? __key_instantiate_and_link+0xb1/0xdc [<ffffffff811a59bf>] ? key_instantiate_and_link+0x42/0x5f [<ffffffff811aa0dc>] call_sbin_request_key+0xe7/0x33b [<ffffffff8139376a>] ? mutex_unlock+0x9/0xb [<ffffffff811a5952>] ? __key_instantiate_and_link+0xb1/0xdc [<ffffffff811a59bf>] ? key_instantiate_and_link+0x42/0x5f [<ffffffff811aa6fa>] ? request_key_auth_new+0x1c2/0x23c [<ffffffff810aaf15>] ? cache_alloc_debugcheck_after+0x108/0x173 [<ffffffff811a9d00>] ? request_key_and_link+0x146/0x300 [<ffffffff810ac568>] ? kmem_cache_alloc+0xe1/0x118 [<ffffffff811a9e45>] request_key_and_link+0x28b/0x300 [<ffffffff811a89ac>] sys_request_key+0xf7/0x14a [<ffffffff81052c0b>] ? trace_hardirqs_on_caller+0x10c/0x130 [<ffffffff81394fb9>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff81001eeb>] system_call_fastpath+0x16/0x1b Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
-
David Howells authored
The keyring key type code should use RCU dereference wrappers, even when it holds the keyring's key semaphore. Reported-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
-
Toshiyuki Okajima authored
find_keyring_by_name() can gain access to a keyring that has had its reference count reduced to zero, and is thus ready to be freed. This then allows the dead keyring to be brought back into use whilst it is being destroyed. The following timeline illustrates the process: |(cleaner) (user) | | free_user(user) sys_keyctl() | | | | key_put(user->session_keyring) keyctl_get_keyring_ID() | || //=> keyring->usage = 0 | | |schedule_work(&key_cleanup_task) lookup_user_key() | || | | kmem_cache_free(,user) | | . |[KEY_SPEC_USER_KEYRING] | . install_user_keyrings() | . || | key_cleanup() [<= worker_thread()] || | | || | [spin_lock(&key_serial_lock)] |[mutex_lock(&key_user_keyr..mutex)] | | || | atomic_read() == 0 || | |{ rb_ease(&key->serial_node,) } || | | || | [spin_unlock(&key_serial_lock)] |find_keyring_by_name() | | ||| | keyring_destroy(keyring) ||[read_lock(&keyring_name_lock)] | || ||| | |[write_lock(&keyring_name_lock)] ||atomic_inc(&keyring->usage) | |. ||| *** GET freeing keyring *** | |. ||[read_unlock(&keyring_name_lock)] | || || | |list_del() |[mutex_unlock(&key_user_k..mutex)] | || | | |[write_unlock(&keyring_name_lock)] ** INVALID keyring is returned ** | | . | kmem_cache_free(,keyring) . | . | atomic_dec(&keyring->usage) v *** DESTROYED *** TIME If CONFIG_SLUB_DEBUG=y then we may see the following message generated: ============================================================================= BUG key_jar: Poison overwritten ----------------------------------------------------------------------------- INFO: 0xffff880197a7e200-0xffff880197a7e200. First byte 0x6a instead of 0x6b INFO: Allocated in key_alloc+0x10b/0x35f age=25 cpu=1 pid=5086 INFO: Freed in key_cleanup+0xd0/0xd5 age=12 cpu=1 pid=10 INFO: Slab 0xffffea000592cb90 objects=16 used=2 fp=0xffff880197a7e200 flags=0x200000000000c3 INFO: Object 0xffff880197a7e200 @offset=512 fp=0xffff880197a7e300 Bytes b4 0xffff880197a7e1f0: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ Object 0xffff880197a7e200: 6a 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b jkkkkkkkkkkkkkkk Alternatively, we may see a system panic happen, such as: BUG: unable to handle kernel NULL pointer dereference at 0000000000000001 IP: [<ffffffff810e61a3>] kmem_cache_alloc+0x5b/0xe9 PGD 6b2b4067 PUD 6a80d067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/kernel/kexec_crash_loaded CPU 1 ... Pid: 31245, comm: su Not tainted 2.6.34-rc5-nofixed-nodebug #2 D2089/PRIMERGY RIP: 0010:[<ffffffff810e61a3>] [<ffffffff810e61a3>] kmem_cache_alloc+0x5b/0xe9 RSP: 0018:ffff88006af3bd98 EFLAGS: 00010002 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88007d19900b RDX: 0000000100000000 RSI: 00000000000080d0 RDI: ffffffff81828430 RBP: ffffffff81828430 R08: ffff88000a293750 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000100000 R12: 00000000000080d0 R13: 00000000000080d0 R14: 0000000000000296 R15: ffffffff810f20ce FS: 00007f97116bc700(0000) GS:ffff88000a280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000001 CR3: 000000006a91c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process su (pid: 31245, threadinfo ffff88006af3a000, task ffff8800374414c0) Stack: 0000000512e0958e 0000000000008000 ffff880037f8d180 0000000000000001 0000000000000000 0000000000008001 ffff88007d199000 ffffffff810f20ce 0000000000008000 ffff88006af3be48 0000000000000024 ffffffff810face3 Call Trace: [<ffffffff810f20ce>] ? get_empty_filp+0x70/0x12f [<ffffffff810face3>] ? do_filp_open+0x145/0x590 [<ffffffff810ce208>] ? tlb_finish_mmu+0x2a/0x33 [<ffffffff810ce43c>] ? unmap_region+0xd3/0xe2 [<ffffffff810e4393>] ? virt_to_head_page+0x9/0x2d [<ffffffff81103916>] ? alloc_fd+0x69/0x10e [<ffffffff810ef4ed>] ? do_sys_open+0x56/0xfc [<ffffffff81008a02>] ? system_call_fastpath+0x16/0x1b Code: 0f 1f 44 00 00 49 89 c6 fa 66 0f 1f 44 00 00 65 4c 8b 04 25 60 e8 00 00 48 8b 45 00 49 01 c0 49 8b 18 48 85 db 74 0d 48 63 45 18 <48> 8b 04 03 49 89 00 eb 14 4c 89 f9 83 ca ff 44 89 e6 48 89 ef RIP [<ffffffff810e61a3>] kmem_cache_alloc+0x5b/0xe9 This problem is that find_keyring_by_name does not confirm that the keyring is valid before accepting it. Skipping keyrings that have been reduced to a zero count seems the way to go. To this end, use atomic_inc_not_zero() to increment the usage count and skip the candidate keyring if that returns false. The following script _may_ cause the bug to happen, but there's no guarantee as the window of opportunity is small: #!/bin/sh LOOP=100000 USER=dummy_user /bin/su -c "exit;" $USER || { /usr/sbin/adduser -m $USER; add=1; } for ((i=0; i<LOOP; i++)) do /bin/su -c "echo '$i' > /dev/null" $USER done (( add == 1 )) && /usr/sbin/userdel -r $USER exit Note that the nominated user must not be in use. An alternative way of testing this may be: for ((i=0; i<100000; i++)) do keyctl session foo /bin/true || break done >&/dev/null as that uses a keyring named "foo" rather than relying on the user and user-session named keyrings. Reported-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
-
Takashi Iwai authored
-
Daniel T Chen authored
BugLink: https://launchpad.net/bugs/541802 The OR's hardware distorts at PCM 100% because it does not correspond to 0 dB. Fix this in patch_cxt5045() for all Packard Bell models. Reported-by: Valombre Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Anisse Astier authored
Add a quirk for all-in-one computer Dell Inspiron One 19 Touch to have proper HP and Mic support. Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Dan Carpenter authored
We should disable irqs when we take the tu->qlock because it is used in the irq handler. The only place that doesn't is snd_timer_user_ccallback(). Most of the time snd_timer_user_ccallback() is called with interrupts disabled but the the first ti->ccallback() call in snd_timer_notify1() has interrupts enabled. This was caught by lockdep which generates the following message: > ================================= > [ INFO: inconsistent lock state ] > 2.6.34-rc5 #5 > --------------------------------- > inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. > dolphin/4003 [HC1[1]:SC0[0]:HE0:SE1] takes: > (&(&tu->qlock)->rlock){?.+...}, at: [<f84ec472>] snd_timer_user_tinterrupt+0x28/0x132 [snd_timer] > {HARDIRQ-ON-W} state was registered at: > [<c1048de9>] __lock_acquire+0x654/0x1482 > [<c1049c73>] lock_acquire+0x5c/0x73 > [<c125ac3e>] _raw_spin_lock+0x25/0x34 > [<f84ec370>] snd_timer_user_ccallback+0x55/0x95 [snd_timer] > [<f84ecc4b>] snd_timer_notify1+0x53/0xca [snd_timer] Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Mattias Walström authored
Fix memory corruption that sometimes result in kernel panic. Signed-off-by: Mattias Walström <mattias@vmlinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel T Chen authored
BugLink: https://launchpad.net/bugs/549267 The OR verified that using the olpc-xo-1_5 model quirk allows the headphones to be audible when inserted into the jack. Capture was also verified to work correctly. Reported-by: Richard Gagne Tested-by: Richard Gagne Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-