Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  FEC: Fix kernel panic in fec_set_mac_address.
  ipv6: Fix default multicast hops setting.
  net: ep93xx_eth stops receiving packets
  drivers/net/phy: micrel phy driver
  dm9601: fix phy/eeprom write routine
  ppp_generic: handle non-linear skbs when passing them to pppd
  ppp_generic: pull 2 bytes so that PPP_PROTO(skb) is valid
  net: fix compile error due to double return type in SOCK_DEBUG
  net/usb: initiate sync sequence in sierra_net.c driver
  net/usb: remove default in Kconfig for sierra_net driver
  r8169: Fix rtl8169_rx_interrupt()
  e1000e: Fix oops caused by ASPM patch.
  net/sb1250: register mdio bus in probe
  sctp: Fix skb_over_panic resulting from multiple invalid parameter errors (CVE-2010-1173) (v4)
  p54pci: fix bugs in p54p_check_tx_ring

drivers/net/arm/ep93xx_eth.c

@@ -311,11 +311,6 @@ err:
 		processed++;
 	}
 
-	if (processed) {
-		wrw(ep, REG_RXDENQ, processed);
-		wrw(ep, REG_RXSTSENQ, processed);
-	}
-
 	return processed;
 }
 
@@ -350,6 +345,11 @@ poll_some_more:
 			goto poll_some_more;
 	}
 
+	if (rx) {
+		wrw(ep, REG_RXDENQ, rx);
+		wrw(ep, REG_RXSTSENQ, rx);
+	}
+
 	return rx;
 }
 

drivers/net/e1000e/netdev.c

@@ -4633,6 +4633,9 @@ static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
 	reg16 &= ~state;
 	pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
 
+	if (!pdev->bus->self)
+		return;
+
 	pos = pci_pcie_cap(pdev->bus->self);
 	pci_read_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, &reg16);
 	reg16 &= ~state;

drivers/net/fec.c

@@ -1653,7 +1653,7 @@ fec_set_mac_address(struct net_device *dev, void *p)
 		(dev->dev_addr[1] << 16) | (dev->dev_addr[0] << 24),
 		fep->hwp + FEC_ADDR_LOW);
 	writel((dev->dev_addr[5] << 16) | (dev->dev_addr[4] << 24),
-		fep + FEC_ADDR_HIGH);
+		fep->hwp + FEC_ADDR_HIGH);
 	return 0;
 }
 

drivers/net/phy/Kconfig

@@ -88,6 +88,11 @@ config LSI_ET1011C_PHY
 	---help---
 	  Supports the LSI ET1011C PHY.
 
+config MICREL_PHY
+	tristate "Driver for Micrel PHYs"
+	---help---
+	  Supports the KSZ9021, VSC8201, KS8001 PHYs.
+
 config FIXED_PHY
 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
 	depends on PHYLIB=y

drivers/net/phy/Makefile

@@ -20,4 +20,5 @@ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
 obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o
 obj-$(CONFIG_NATIONAL_PHY)	+= national.o
 obj-$(CONFIG_STE10XP)		+= ste10Xp.o
+obj-$(CONFIG_MICREL_PHY)	+= micrel.o
 obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o

drivers/net/phy/micrel.c

+/*
+ * drivers/net/phy/micrel.c
+ *
+ * Driver for Micrel PHYs
+ *
+ * Author: David J. Choi
+ *
+ * Copyright (c) 2010 Micrel, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Support : ksz9021 , vsc8201, ks8001
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define	PHY_ID_KSZ9021			0x00221611
+#define	PHY_ID_VSC8201			0x000FC413
+#define	PHY_ID_KS8001			0x0022161A
+
+
+static int kszphy_config_init(struct phy_device *phydev)
+{
+	return 0;
+}
+
+
+static struct phy_driver ks8001_driver = {
+	.phy_id		= PHY_ID_KS8001,
+	.phy_id_mask	= 0x00fffff0,
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_POLL,
+	.config_init	= kszphy_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.driver		= { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver vsc8201_driver = {
+	.phy_id		= PHY_ID_VSC8201,
+	.name		= "Micrel VSC8201",
+	.phy_id_mask	= 0x00fffff0,
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_POLL,
+	.config_init	= kszphy_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.driver		= { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver ksz9021_driver = {
+	.phy_id		= PHY_ID_KSZ9021,
+	.phy_id_mask	= 0x000fff10,
+	.name		= "Micrel KSZ9021 Gigabit PHY",
+	.features	= PHY_GBIT_FEATURES | SUPPORTED_Pause,
+	.flags		= PHY_POLL,
+	.config_init	= kszphy_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.driver		= { .owner = THIS_MODULE, },
+};
+
+static int __init ksphy_init(void)
+{
+	int ret;
+
+	ret = phy_driver_register(&ks8001_driver);
+	if (ret)
+		goto err1;
+	ret = phy_driver_register(&vsc8201_driver);
+	if (ret)
+		goto err2;
+
+	ret = phy_driver_register(&ksz9021_driver);
+	if (ret)
+		goto err3;
+	return 0;
+
+err3:
+	phy_driver_unregister(&vsc8201_driver);
+err2:
+	phy_driver_unregister(&ks8001_driver);
+err1:
+	return ret;
+}
+
+static void __exit ksphy_exit(void)
+{
+	phy_driver_unregister(&ks8001_driver);
+	phy_driver_unregister(&vsc8201_driver);
+	phy_driver_unregister(&ksz9021_driver);
+}
+
+module_init(ksphy_init);
+module_exit(ksphy_exit);
+
+MODULE_DESCRIPTION("Micrel PHY driver");
+MODULE_AUTHOR("David J. Choi");
+MODULE_LICENSE("GPL");

drivers/net/ppp_generic.c

@@ -405,6 +405,7 @@ static ssize_t ppp_read(struct file *file, char __user *buf,
 	DECLARE_WAITQUEUE(wait, current);
 	ssize_t ret;
 	struct sk_buff *skb = NULL;
+	struct iovec iov;
 
 	ret = count;
 
@@ -448,7 +449,9 @@ static ssize_t ppp_read(struct file *file, char __user *buf,
 	if (skb->len > count)
 		goto outf;
 	ret = -EFAULT;
-	if (copy_to_user(buf, skb->data, skb->len))
+	iov.iov_base = buf;
+	iov.iov_len = count;
+	if (skb_copy_datagram_iovec(skb, 0, &iov, skb->len))
 		goto outf;
 	ret = skb->len;
 
@@ -1567,13 +1570,22 @@ ppp_input(struct ppp_channel *chan, struct sk_buff *skb)
 	struct channel *pch = chan->ppp;
 	int proto;
 
-	if (!pch || skb->len == 0) {
+	if (!pch) {
 		kfree_skb(skb);
 		return;
 	}
 
-	proto = PPP_PROTO(skb);
 	read_lock_bh(&pch->upl);
+	if (!pskb_may_pull(skb, 2)) {
+		kfree_skb(skb);
+		if (pch->ppp) {
+			++pch->ppp->dev->stats.rx_length_errors;
+			ppp_receive_error(pch->ppp);
+		}
+		goto done;
+	}
+
+	proto = PPP_PROTO(skb);
 	if (!pch->ppp || proto >= 0xc000 || proto == PPP_CCPFRAG) {
 		/* put it on the channel queue */
 		skb_queue_tail(&pch->file.rq, skb);
@@ -1585,6 +1597,8 @@ ppp_input(struct ppp_channel *chan, struct sk_buff *skb)
 	} else {
 		ppp_do_recv(pch->ppp, skb, pch);
 	}
+
+done:
 	read_unlock_bh(&pch->upl);
 }
 
@@ -1617,7 +1631,8 @@ ppp_input_error(struct ppp_channel *chan, int code)
 static void
 ppp_receive_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch)
 {
-	if (pskb_may_pull(skb, 2)) {
+	/* note: a 0-length skb is used as an error indication */
+	if (skb->len > 0) {
 #ifdef CONFIG_PPP_MULTILINK
 		/* XXX do channel-level decompression here */
 		if (PPP_PROTO(skb) == PPP_MP)
@@ -1625,15 +1640,10 @@ ppp_receive_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch)
 		else
 #endif /* CONFIG_PPP_MULTILINK */
 			ppp_receive_nonmp_frame(ppp, skb);
-		return;
+	} else {
+		kfree_skb(skb);
+		ppp_receive_error(ppp);
 	}
-
-	if (skb->len > 0)
-		/* note: a 0-length skb is used as an error indication */
-		++ppp->dev->stats.rx_length_errors;
-
-	kfree_skb(skb);
-	ppp_receive_error(ppp);
 }
 
 static void

drivers/net/r8169.c

@@ -1042,14 +1042,14 @@ static void rtl8169_vlan_rx_register(struct net_device *dev,
 }
 
 static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc,
-			       struct sk_buff *skb)
+			       struct sk_buff *skb, int polling)
 {
 	u32 opts2 = le32_to_cpu(desc->opts2);
 	struct vlan_group *vlgrp = tp->vlgrp;
 	int ret;
 
 	if (vlgrp && (opts2 & RxVlanTag)) {
-		vlan_hwaccel_receive_skb(skb, vlgrp, swab16(opts2 & 0xffff));
+		__vlan_hwaccel_rx(skb, vlgrp, swab16(opts2 & 0xffff), polling);
 		ret = 0;
 	} else
 		ret = -1;
@@ -1066,7 +1066,7 @@ static inline u32 rtl8169_tx_vlan_tag(struct rtl8169_private *tp,
 }
 
 static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc,
-			       struct sk_buff *skb)
+			       struct sk_buff *skb, int polling)
 {
 	return -1;
 }
@@ -4445,12 +4445,20 @@ out:
 	return done;
 }
 
+/*
+ * Warning : rtl8169_rx_interrupt() might be called :
+ * 1) from NAPI (softirq) context
+ *	(polling = 1 : we should call netif_receive_skb())
+ * 2) from process context (rtl8169_reset_task())
+ *	(polling = 0 : we must call netif_rx() instead)
+ */
 static int rtl8169_rx_interrupt(struct net_device *dev,
 				struct rtl8169_private *tp,
 				void __iomem *ioaddr, u32 budget)
 {
 	unsigned int cur_rx, rx_left;
 	unsigned int delta, count;
+	int polling = (budget != ~(u32)0) ? 1 : 0;
 
 	cur_rx = tp->cur_rx;
 	rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx;
@@ -4512,8 +4520,12 @@ static int rtl8169_rx_interrupt(struct net_device *dev,
 			skb_put(skb, pkt_size);
 			skb->protocol = eth_type_trans(skb, dev);
 
-			if (rtl8169_rx_vlan_skb(tp, desc, skb) < 0)
-				netif_receive_skb(skb);
+			if (rtl8169_rx_vlan_skb(tp, desc, skb, polling) < 0) {
+				if (likely(polling))
+					netif_receive_skb(skb);
+				else
+					netif_rx(skb);
+			}
 
 			dev->stats.rx_bytes += pkt_size;
 			dev->stats.rx_packets++;

drivers/net/sb1250-mac.c

@@ -2353,17 +2353,36 @@ static int sbmac_init(struct platform_device *pldev, long long base)
 
 	sc->mii_bus = mdiobus_alloc();
 	if (sc->mii_bus == NULL) {
-		sbmac_uninitctx(sc);
-		return -ENOMEM;
+		err = -ENOMEM;
+		goto uninit_ctx;
 	}
 
+	sc->mii_bus->name = sbmac_mdio_string;
+	snprintf(sc->mii_bus->id, MII_BUS_ID_SIZE, "%x", idx);
+	sc->mii_bus->priv = sc;
+	sc->mii_bus->read = sbmac_mii_read;
+	sc->mii_bus->write = sbmac_mii_write;
+	sc->mii_bus->irq = sc->phy_irq;
+	for (i = 0; i < PHY_MAX_ADDR; ++i)
+		sc->mii_bus->irq[i] = SBMAC_PHY_INT;
+
+	sc->mii_bus->parent = &pldev->dev;
+	/*
+	 * Probe PHY address
+	 */
+	err = mdiobus_register(sc->mii_bus);
+	if (err) {
+		printk(KERN_ERR "%s: unable to register MDIO bus\n",
+		       dev->name);
+		goto free_mdio;
+	}
+	dev_set_drvdata(&pldev->dev, sc->mii_bus);
+
 	err = register_netdev(dev);
 	if (err) {
 		printk(KERN_ERR "%s.%d: unable to register netdev\n",
 		       sbmac_string, idx);
-		mdiobus_free(sc->mii_bus);
-		sbmac_uninitctx(sc);
-		return err;
+		goto unreg_mdio;
 	}
 
 	pr_info("%s.%d: registered as %s\n", sbmac_string, idx, dev->name);
@@ -2379,19 +2398,15 @@ static int sbmac_init(struct platform_device *pldev, long long base)
 	pr_info("%s: SiByte Ethernet at 0x%08Lx, address: %pM\n",
 	       dev->name, base, eaddr);
 
-	sc->mii_bus->name = sbmac_mdio_string;
-	snprintf(sc->mii_bus->id, MII_BUS_ID_SIZE, "%x", idx);
-	sc->mii_bus->priv = sc;
-	sc->mii_bus->read = sbmac_mii_read;
-	sc->mii_bus->write = sbmac_mii_write;
-	sc->mii_bus->irq = sc->phy_irq;
-	for (i = 0; i < PHY_MAX_ADDR; ++i)
-		sc->mii_bus->irq[i] = SBMAC_PHY_INT;
-
-	sc->mii_bus->parent = &pldev->dev;
-	dev_set_drvdata(&pldev->dev, sc->mii_bus);
-
 	return 0;
+unreg_mdio:
+	mdiobus_unregister(sc->mii_bus);
+	dev_set_drvdata(&pldev->dev, NULL);
+free_mdio:
+	mdiobus_free(sc->mii_bus);
+uninit_ctx:
+	sbmac_uninitctx(sc);
+	return err;
 }
 
 
@@ -2417,16 +2432,6 @@ static int sbmac_open(struct net_device *dev)
 		goto out_err;
 	}
 
-	/*
-	 * Probe PHY address
-	 */
-	err = mdiobus_register(sc->mii_bus);
-	if (err) {
-		printk(KERN_ERR "%s: unable to register MDIO bus\n",
-		       dev->name);
-		goto out_unirq;
-	}
-
 	sc->sbm_speed = sbmac_speed_none;
 	sc->sbm_duplex = sbmac_duplex_none;
 	sc->sbm_fc = sbmac_fc_none;
@@ -2457,11 +2462,7 @@ static int sbmac_open(struct net_device *dev)
 	return 0;
 
 out_unregister:
-	mdiobus_unregister(sc->mii_bus);
-
-out_unirq:
 	free_irq(dev->irq, dev);
-
 out_err:
 	return err;
 }
@@ -2650,9 +2651,6 @@ static int sbmac_close(struct net_device *dev)
 
 	phy_disconnect(sc->phy_dev);
 	sc->phy_dev = NULL;
-
-	mdiobus_unregister(sc->mii_bus);
-
 	free_irq(dev->irq, dev);
 
 	sbdma_emptyring(&(sc->sbm_txdma));
@@ -2760,6 +2758,7 @@ static int __exit sbmac_remove(struct platform_device *pldev)
 
 	unregister_netdev(dev);
 	sbmac_uninitctx(sc);
+	mdiobus_unregister(sc->mii_bus);
 	mdiobus_free(sc->mii_bus);
 	iounmap(sc->sbm_base);
 	free_netdev(dev);

drivers/net/usb/Kconfig

@@ -400,7 +400,6 @@ config USB_IPHETH
 config USB_SIERRA_NET
 	tristate "USB-to-WWAN Driver for Sierra Wireless modems"
 	depends on USB_USBNET
-	default y
 	help
 	  Choose this option if you have a Sierra Wireless USB-to-WWAN device.
 

drivers/net/usb/dm9601.c

@@ -240,7 +240,7 @@ static int dm_write_shared_word(struct usbnet *dev, int phy, u8 reg, __le16 valu
 		goto out;
 
 	dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg);
-	dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1c : 0x14);
+	dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1a : 0x12);
 
 	for (i = 0; i < DM_TIMEOUT; i++) {
 		u8 tmp;

drivers/net/usb/sierra_net.c

@@ -789,6 +789,9 @@ static int sierra_net_bind(struct usbnet *dev, struct usb_interface *intf)
 	/* prepare sync message from template */
 	memcpy(priv->sync_msg, sync_tmplate, sizeof(priv->sync_msg));
 
+	/* initiate the sync sequence */
+	sierra_net_dosync(dev);
+
 	return 0;
 }
 

drivers/net/wireless/p54/p54pci.c

@@ -246,7 +246,7 @@ static void p54p_check_tx_ring(struct ieee80211_hw *dev, u32 *index,
 	u32 idx, i;
 
 	i = (*index) % ring_limit;
-	(*index) = idx = le32_to_cpu(ring_control->device_idx[1]);
+	(*index) = idx = le32_to_cpu(ring_control->device_idx[ring_index]);
 	idx %= ring_limit;
 
 	while (i != idx) {

include/net/sctp/structs.h

@@ -778,6 +778,7 @@ int sctp_user_addto_chunk(struct sctp_chunk *chunk, int off, int len,
 			  struct iovec *data);
 void sctp_chunk_free(struct sctp_chunk *);
 void  *sctp_addto_chunk(struct sctp_chunk *, int len, const void *data);
+void  *sctp_addto_chunk_fixed(struct sctp_chunk *, int len, const void *data);
 struct sctp_chunk *sctp_chunkify(struct sk_buff *,
 				 const struct sctp_association *,
 				 struct sock *);

include/net/sock.h

@@ -74,7 +74,7 @@
 					printk(KERN_DEBUG msg); } while (0)
 #else
 /* Validate arguments and do nothing */
-static void inline int __attribute__ ((format (printf, 2, 3)))
+static inline void __attribute__ ((format (printf, 2, 3)))
 SOCK_DEBUG(struct sock *sk, const char *msg, ...)
 {
 }

net/ipv6/af_inet6.c

@@ -200,7 +200,7 @@ lookup_protocol:
 
 	inet_sk(sk)->pinet6 = np = inet6_sk_generic(sk);
 	np->hop_limit	= -1;
-	np->mcast_hops	= -1;
+	np->mcast_hops	= IPV6_DEFAULT_MCASTHOPS;
 	np->mc_loop	= 1;
 	np->pmtudisc	= IPV6_PMTUDISC_WANT;
 	np->ipv6only	= net->ipv6.sysctl.bindv6only;

net/sctp/sm_make_chunk.c

@@ -108,7 +108,7 @@ static const struct sctp_paramhdr prsctp_param = {
 	cpu_to_be16(sizeof(struct sctp_paramhdr)),
 };
 
-/* A helper to initialize to initialize an op error inside a
+/* A helper to initialize an op error inside a
  * provided chunk, as most cause codes will be embedded inside an
  * abort chunk.
  */
@@ -125,6 +125,29 @@ void  sctp_init_cause(struct sctp_chunk *chunk, __be16 cause_code,
 	chunk->subh.err_hdr = sctp_addto_chunk(chunk, sizeof(sctp_errhdr_t), &err);
 }
 
+/* A helper to initialize an op error inside a
+ * provided chunk, as most cause codes will be embedded inside an
+ * abort chunk.  Differs from sctp_init_cause in that it won't oops
+ * if there isn't enough space in the op error chunk
+ */
+int sctp_init_cause_fixed(struct sctp_chunk *chunk, __be16 cause_code,
+		      size_t paylen)
+{
+	sctp_errhdr_t err;
+	__u16 len;
+
+	/* Cause code constants are now defined in network order.  */
+	err.cause = cause_code;
+	len = sizeof(sctp_errhdr_t) + paylen;
+	err.length  = htons(len);
+
+	if (skb_tailroom(chunk->skb) >  len)
+		return -ENOSPC;
+	chunk->subh.err_hdr = sctp_addto_chunk_fixed(chunk,
+						     sizeof(sctp_errhdr_t),
+						     &err);
+	return 0;
+}
 /* 3.3.2 Initiation (INIT) (1)
  *
  * This chunk is used to initiate a SCTP association between two
@@ -1132,6 +1155,24 @@ nodata:
 	return retval;
 }
 
+/* Create an Operation Error chunk of a fixed size,
+ * specifically, max(asoc->pathmtu, SCTP_DEFAULT_MAXSEGMENT)
+ * This is a helper function to allocate an error chunk for
+ * for those invalid parameter codes in which we may not want
+ * to report all the errors, if the incomming chunk is large
+ */
+static inline struct sctp_chunk *sctp_make_op_error_fixed(
+	const struct sctp_association *asoc,
+	const struct sctp_chunk *chunk)
+{
+	size_t size = asoc ? asoc->pathmtu : 0;
+
+	if (!size)
+		size = SCTP_DEFAULT_MAXSEGMENT;
+
+	return sctp_make_op_error_space(asoc, chunk, size);
+}
+
 /* Create an Operation Error chunk.  */
 struct sctp_chunk *sctp_make_op_error(const struct sctp_association *asoc,
 				 const struct sctp_chunk *chunk,
@@ -1374,6 +1415,18 @@ void *sctp_addto_chunk(struct sctp_chunk *chunk, int len, const void *data)
 	return target;
 }
 
+/* Append bytes to the end of a chunk. Returns NULL if there isn't sufficient
+ * space in the chunk
+ */
+void *sctp_addto_chunk_fixed(struct sctp_chunk *chunk,
+			     int len, const void *data)
+{
+	if (skb_tailroom(chunk->skb) > len)
+		return sctp_addto_chunk(chunk, len, data);
+	else
+		return NULL;
+}
+
 /* Append bytes from user space to the end of a chunk.  Will panic if
  * chunk is not big enough.
  * Returns a kernel err value.
@@ -1977,13 +2030,12 @@ static sctp_ierror_t sctp_process_unk_param(const struct sctp_association *asoc,
 		 * returning multiple unknown parameters.
 		 */
 		if (NULL == *errp)
-			*errp = sctp_make_op_error_space(asoc, chunk,
-					ntohs(chunk->chunk_hdr->length));
+			*errp = sctp_make_op_error_fixed(asoc, chunk);
 
 		if (*errp) {
-			sctp_init_cause(*errp, SCTP_ERROR_UNKNOWN_PARAM,
+			sctp_init_cause_fixed(*errp, SCTP_ERROR_UNKNOWN_PARAM,
 					WORD_ROUND(ntohs(param.p->length)));
-			sctp_addto_chunk(*errp,
+			sctp_addto_chunk_fixed(*errp,
 					WORD_ROUND(ntohs(param.p->length)),
 					param.v);
 		} else {