Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

Signed-off-by: Kevin Hilman <khilman@mvista.com>

Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>

- CONFIG_PREEMPT_RT is only available with Ingo's RT
  patches it seems.
- Even with changing it to CONFIG_PREEMPT will give
  scheduling while atomic BUG. So, it is better to
  remove it.
Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>

Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>

Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>

- Use kernel coding style
- Add support for getting the clock based on the device id
- Remove unncessary header files
- Add proc fs entry for viewing the information about
  the clocks as /proc/davinci_clocks.
- Add error checking wherever necessary.
Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>

Conflicts merged by hand:

	arch/arm/Kconfig
	arch/arm/Makefile
	arch/arm/mm/Kconfig

Some things are probably broken right now with the generic irq
code update.

Since ab7ad9fe sti-console puts
crap into STI if serial console is configured as a preferred console.

This is due to uninitialized sti_console_channel (0 is a bad channel
value).

The fix is to check the STI channel value before registering the
console driver.
Signed-off-by: Mikko Ylinen <mikko.k.ylinen@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

Fix a wake-from-sleep bug where OTG was not taken out from
idle mode.
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

We have to make sure that the LCD DMA external destination bit is
cleared by default, otherwise OMAP won't sleep.
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>

The attached is necessary to move the Amstrad Delta LCD driver over to
the new PWL defines that have been pushed.
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Tony Lindgren <tony@atomide.com>

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/dtor/input: (24 commits)
  Input: ati_remote - use msec instead of jiffies
  Input: ati_remote - add missing input_sync()
  Input: ati_remote - relax permissions sysfs module parameters
  Input: ati_remote - make filter time a module parameter
  Input: atkbd - restore repeat rate when resuming
  Input: trackpoint - activate protocol when resuming
  Input: logips2pp - fix button mapping for MX300
  Input: keyboard - change to use kzalloc
  Input: serio/gameport - check whether driver core calls succeeded
  Input: spaceball - make 4000FLX Lefty work
  Input: keyboard - simplify emulate_raw() implementation
  Input: keyboard - remove static variable and clean up initialization
  Input: hiddev - use standard list implementation
  Input: add missing handler->start() call
  Input: HID - fix potential out-of-bound array access
  Input: fix list iteration in input_release_device()
  Input: iforce - add Trust Force Feedback Race Master support
  Input: iforce - check array bounds before accessing elements
  Input: libps2 - warn instead of oopsing when passed bad arguments
  Input: fm801-gp - fix use after free
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa:
  [ALSA] Don't reject O_RDWR at opening PCM OSS with read/write-only device
  [ALSA] snd-emu10k1: Implement support for Audigy 2 ZS [SB0353]
  [ALSA] add MAINTAINERS entry for snd-aoa
  [ALSA] aoa: platform function gpio: ignore errors from functions that don't exist
  [ALSA] make snd-powermac load even when it can't bind the device
  [ALSA] aoa: fix toonie codec
  [ALSA] aoa: feature gpio layer: fix IRQ access
  [ALSA] Conversions from kmalloc+memset to k(z|c)alloc
  [ALSA] snd-emu10k1: Fixes ALSA bug#2190

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [LAPB]: Fix windowsize check
  [TCP]: Fixes IW > 2 cases when TCP is application limited
  [PKT_SCHED] RED: Fix overflow in calculation of queue average
  [LLX]: SOCK_DGRAM interface fixes
  [PKT_SCHED]: Return ENOENT if qdisc module is unavailable
  [BRIDGE]: netlink status fix

While busy-waiting for completion, check the hardware after scheduling;
don't schedule and then immediately check the _timeout_.  If the yield()
took a long time (as it does on my OLPC prototype board when it's busy),
we'd report a timeout even though the hardware was now ready.

This fixes it, and also switches the yield() for a cond_resched() because
we don't actually want to be _that_ nice about it.  I see nice
tightly-packed SMBus transactions now, rather than waiting for milliseconds
between successive phases.

Actually, we shouldn't be busy-waiting here at all.  We should be using
interrupts.  That's an exercise for another day though.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Cc: Christer Weinigel <wingel@nano-system.com>
Cc: <Jordan.Crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

I saw an oops down this path when trying to create a new file on a UDF
filesystem which was internally marked as readonly, but mounted rw:

udf_create
        udf_new_inode
                new_inode
                        alloc_inode
                        	udf_alloc_inode
                udf_new_block
                        returns EIO due to readonlyness
                iput (on error)
                        udf_put_inode
                                udf_discard_prealloc
                                        udf_next_aext
                                                udf_current_aext
                                                        udf_get_fileshortad
                                                                OOPS

the udf_discard_prealloc() path was examining uninitialized fields of the
udf inode.

udf_discard_prealloc() already has this code to short-circuit the discard
path if no extents are preallocated:

        if (UDF_I_ALLOCTYPE(inode) == ICBTAG_FLAG_AD_IN_ICB ||
                inode->i_size == UDF_I_LENEXTENTS(inode))
        {
                return;
        }

so if we initialize UDF_I_LENEXTENTS(inode) = 0 earlier in udf_new_inode,
we won't try to free the (not) preallocated blocks, since this will match
the i_size = 0 set when the inode was initialized.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The recent fixups in futex.c need to be applied to futex_compat.c too.  Fixes
a hang reported by Olaf.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

A patch in -mm kernel correct the parsing of "address resources" of pnpacpi.
Before we assumed it was memory only, but it could be also IO.

But this change show an hidden bug : some resources could be producer type
that are not handled by pnp layer.  So we should ignore the producer
resources.

This patch fixes bug 6292 (http://bugzilla.kernel.org/show_bug.cgi?id=6292).
Some devices like PNP0A03 have 0xd00-0xffff and 0x0-0xcf7 as IO producer
resources.

Before correcting "address resources" parsing, it was seen as memory and was
harmless, because nobody tried to reserve this memory range as it should be
IO.

With the correction it become IO resources, and make failed all others device
that want to register IO in this range and use pnp layer (like a ISA sound
card).

The solution is to ignore producer resources
Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: "Brown, Len" <len.brown@intel.com>
Acked-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

reiserfs_write_full_page does zero bytes in the file past eof, but it may
call get_block on those buffers as well.  On machines where the page size
is larger than the blocksize, this can result in mmaped files incorrectly
growing up to a block boundary during writepage.

The fix is to avoid calling get_block for any blocks that are entirely past
eof
Signed-off-by: Chris Mason <mason@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The correct lock ordering is inode lock -> BKL
Signed-off-by: Chris Mason <mason@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch is for collision check enhancement for memory hot add.

It's better to do resouce collision check before doing memory hot add,
which will touch memory management structures.

And add_section() should check section exists or not before calling
sparse_add_one_section(). (sparse_add_one_section() will do another
check anyway. but checking in memory_hotplug.c will be easy to understand.)
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: keith mannthey <kmannth@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

both of acpi_memory_enable_device() and acpi_memory_add_device() may evaluate
_CRS method.

We should avoid evaluate device's resource twice if we could get it
successfully in past.
Signed-off-by: KAMEZWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Keith Mannthey <kmannth@gmail.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

add_memory() does all necessary check to avoid collision.  then, acpi layer
doesn't have to check region by itself.

(*) pfn_valid() just returns page struct is valid or not. It returns 0
    if a section has been already added even is ioresource is not added.
    ioresource collision check in mm/memory_hotplug.c can do more precise
    collistion check.
    added enabled bit check just for sanity check..
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Keith Mannthey <kmannth@gmail.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

find_next_system_ram() is used to find available memory resource at onlining
newly added memory.  This patch fixes following problem.

find_next_system_ram() cannot catch this case.

Resource:      (start)-------------(end)
Section :                (start)-------------(end)
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Keith Mannthey <kmannth@gmail.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

find_next_system_ram() returns valid memory range which meets requested area,
only used by memory-hot-add.

This function always rewrite requested resource even if returned area is not
fully fit in requested one.  And sometimes the returnd resource is larger than
requested area.  This annoyes the caller.  This patch changes the returned
value to fit in requested area.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Keith Mannthey <kmannth@gmail.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

ioresouce handling code in memory hotplug allows not-aligned memory hot add.
But when memmap and other memory structures are initialized, parameters should
be aligned.  (if not aligned, initialization of mem_map will do wrong, it
assumes parameters are aligned.) This patch fix it.

And this patch allows ioresource collision check to handle -EEXIST.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Keith Mannthey <kmannth@gmail.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

In bugzilla #6941, Jens Kilian reported:

"The function befs_utf2nls (in fs/befs/linuxvfs.c) writes a 0 byte past the
end of a block of memory allocated via kmalloc(), leading to memory
corruption.  This happens only for filenames which are pure ASCII and a
multiple of 4 bytes in length.  [...]

Without DEBUG_SLAB, this leads to further corruption and hard lockups; I
believe this is the bug which has made kernels later than 2.6.8 unusable
for me.  (This must be due to changes in memory management, the bug has
been in the BeFS driver since the time it was introduced (AFAICT).)

Steps to reproduce:
Create a directory (in BeOS, naturally :-) with files named, e.g.,
"1", "22", "333", "4444", ...  Mount it in Linux and do an "ls" or "find""

This patch implements the suggested fix. Credits to Jens Kilian for
debugging the problem and finding the right fix.
Signed-off-by: Diego Calleja <diegocg@gmail.com>
Cc: Jens Kilian <jjk@acm.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

At least Maxtor OneTouch III require a "start stop unit" command after auto
spin-down before the next access can proceed.  This patch activates the
responsible code in scsi_mod for all Maxtor SBP-2 disks.
https://bugzilla.novell.com/show_bug.cgi?id=183011

Maybe that should be done for all SBP-2 disks, but better be cautious.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Jody McIntyre <scjody@modernduck.com>
Cc: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

While helping someone to submit a patch to the stable branch, I noticed
that the stable branch is not listed in the MAINTAINERS file.  This was
after I went there to look for the email addresses for the stable branch
list (stable@kernel.org).

This patch adds the stable branch to the maintainers file so that people
can find where to send patches when they have a fix for the stable team.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Clean up proc file removal in sq module for superh arch.  currently on a
failed module load or on module unload a proc file is left registered which
can cause a random memory execution or oopses if read after unload.  This
patch cleans up that deregistration.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* MODE_MASK is unused in eicon driver.
* Conflicts with a ptrace stuff on arm.

drivers/isdn/hardware/eicon/divasync.h:259:1: warning: "MODE_MASK" redefined
include2/asm/ptrace.h:48:1: warning: this is the location of the previous definition
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Karsten Keil <kkeil@suse.de>
Acked-by: Armin Schindler <armin@melware.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

A set of tty line discipline cleanup patches were introduced before the
dawn of time, in kernel version 2.4.21.  This patch performs that cleanup
for the hvsi driver.

The hvsi driver is used only on IBM pSeries PowerPC boxes.  The driver was
originally written by Hollis Blanchard, who has delegated maintainership to
me.  So this my first and maybe only patch in this official new role,
because this driver is otherwise bug-free :-)

Alan: "Actually its also a bug fix, tty->ldisc should be locked by refcounting
and the helpers do this for you."
Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>