Fix I2C compile on omap1

Here's a further patch to centralize the pm code.

No commit message

Patch fixes following error, which gets generated if you don't select
IrDA driver for H4.

arch/arm/mach-omap2/built-in.o(.text+0x1844): In function read_gpio_expa'
arch/arm/mach-omap2/built-in.o(.text+0x186c): In function write_gpio_expa'
arch/arm/mach-omap2/built-in.o(.text+0x18ac): In function read_gpio_expa'
arch/arm/mach-omap2/built-in.o(.text+0x18e4): In function write_gpio_expa'
make: *** [.tmp_vmlinux1] Error 1
Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fixed compile for GPIO expander on 24xx

McBSP support on omap24xx

Fix clk_use/unuse for dsp

This patch enable OMAP sound on omap24xx
To test omap sound, you first have to patch the first spi patch from komal
shah not the latest spi patch.

It also adds 'OSS L/R Channel Interchange fix' on tsc2101

Any comments are welcome.

We need to display correct SRAM physical address.

>>12) ALSA Audio L/R Channel Interchanges fix
>>http://linux.omap.com/pipermail/linux-omap-open-source/2005-December/005971.html

Can you check if this is really applied? Using most recent git I can
still apply it ;-)
There were two similiar patches: One for OSS (is applied, number 7 of
the list) and this one for ALSA.

input: device omap_ts is statically allocated, will not register
Please convert to input_allocate_device() or contact dtor_core@ameritech.net

Signed-off-by: Dirk Behme <dirk.behme_at_de.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Attached the updated IrDA patch (integrated workqueue) with 24xx
support.
Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch syncs omap's use of clock framework with the arm common
clock interface. Please use clk_enable/disable from now on, it
does what clk_use/unuse on omap used to do.

Fix file names

This patch adds minimal pm.c and sleep.S for omap2.

Please note that it does not contain suspend or voltage scaling yet.

Attached patch fixes following warning:
arch/arm/mach-omap1/pm.c: In function vbus_active'
Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Clean-up omap2 low-level io init and ensure cache & tlb flushing

Caches and tlb must be flushed after map_io as pointed out by RMK on
linux-arm-kernel mailing list.

This patch adds does following:

- Move hw init from omap_map_common_io() to new function omap1_init_common_hw()

- Ensure cache and tlb flushing is done in omap_map_common_io() because of
  cpu detection

- Ensure cache and tlb flushing is done after mapping sram

- Remove old unused init check code

Fix compile for omap_udc

Fix VoiceBlue indentation

OMAP MTD NOR mapping driver remove partitions created from platform data.
Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Remove support for board Netstar. I hope it helped to sort out various
needs to drivers and now when nearly everything was converted to
platform device there is no more need to bother you with updates to
board file :-). I'll maintain it as separate patch (using PTXdist).
Thanks for all the fish :-)

Fix typo to compile OSK

Do we really need this debug macros? If not, I have removed it in this
patch.
Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Check the flash timings on OSK to avoid problems with jffs2. Some
versions of uboot set incorrect timings.

Attached patch uses "struct platform_driver" and kmalloc->kzalloc.
Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Some folks have reported "serial console corruption" issues when using
the current omap_h3_1710_defconfig due to CONFIG_DEBUG_LL=y. This patch
disables CONFIG_DEBUG_LL since it's rarely required and only serves to
confuse some folks when they observe "serial console corruption"
while using the defconfig.

OSS L/R Channel Interchange fix as proposed by
Ajaya Babu Anne <anneajaya_at_gmail.com>

Signed-off-by: Dirk Behme <dirk.behme_at_de.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch from Juha Yrjola adds two missing USB clocks.

Please note that CONFIG_OMAP_RESET_CLOCKS may still need to be
disabled in .config for USB to work on some platforms (OSK).

arch/arm/mach-omap1/pm.c: In function do_sleep'
if CONFIG_OMAP_MPU_TIMER is defined.

Signed-off-by: Dirk Behme <dirk.behme_at_de.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fix OMAP touchscreen timer restart BUG.

kernel BUG at include/linux/timer.h:83!
[<c002ac60>] (__bug+0x0/0x58) from [<c01a3fbc>] (omap_ts_handler+0x60/0x78)
[<c01a3f5c>] (omap_ts_handler+0x0/0x78) from [<c00269fc>] (__do_irq+0x4c/0x8c)

which is:

static inline void add_timer(struct timer_list *timer)
{
        BUG_ON(timer_pending(timer));
        __mod_timer(timer, timer->expires);
Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

- register an "omap-keypad" device so that the keypad
  driver actually gets probed
- initialize kp_tasklet.data so that we don't crash the
  first time the keypad tasklet runs

Fix fb driver miscompile

Fix audio driver miscompile

Hey, it's fifteen years today since I bought the machine that got Linux
started.  January 2nd is a good date.