- 13 Jul, 2009 2 commits
-
-
Jan Kara authored
Contents of long symlinks is written via standard write methods. So when the write fails, we add inode to orphan list. But symlinks don't have .truncate method defined so nobody properly removes them from the on disk orphan list. Fix this by calling ext4_truncate() directly instead of calling vmtruncate() (which is saner anyway since we don't need anything vmtruncate() does except from calling .truncate in these paths). We also add inode to orphan list only if ext4_can_truncate() is true (currently, it can be false for symlinks when there are no blocks allocated) - otherwise orphan list processing will complain and ext4_truncate() will not remove inode from on-disk orphan list. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
-
Jan Kara authored
The following race can happen: CPU1 CPU2 checkpointing code checks the buffer, adds it to an array for writeback do_get_write_access() ... lock_buffer() unlock_buffer() flush_batch() submits the buffer for IO __jbd2_journal_file_buffer() So a buffer under writeout is returned from do_get_write_access(). Since the filesystem code relies on the fact that journaled buffers cannot be written out, it does not take the buffer lock and so it can modify buffer while it is under writeout. That can lead to a filesystem corruption if we crash at the right moment. We fix the problem by clearing the buffer dirty bit under buffer_lock even if the buffer is on BJ_None list. Actually, we clear the dirty bit regardless the list the buffer is in and warn about the fact if the buffer is already journalled. Thanks for spotting the problem goes to dingdinghua <dingdinghua85@gmail.com>. Reported-by: dingdinghua <dingdinghua85@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
-
- 06 Jul, 2009 1 commit
-
-
Jesper Dangaard Brouer authored
The ext4 module uses rcu_call() thus it should use rcu_barrier()on module unload. The kmem cache ext4_pspace_cachep is sometimes free'ed using call_rcu() callbacks. Thus, we must wait for completion of call_rcu() before doing kmem_cache_destroy(). Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
-
- 13 Jul, 2009 1 commit
-
-
Eric Sandeen authored
As Ted noted, the ext4_allocation_request isn't well aligned. Looking at it with pahole we're wasting space on 64-bit arches: struct ext4_allocation_request { struct inode * inode; /* 0 8 */ ext4_lblk_t logical; /* 8 4 */ /* XXX 4 bytes hole, try to pack */ ext4_fsblk_t goal; /* 16 8 */ ext4_lblk_t lleft; /* 24 4 */ /* XXX 4 bytes hole, try to pack */ ext4_fsblk_t pleft; /* 32 8 */ ext4_lblk_t lright; /* 40 4 */ /* XXX 4 bytes hole, try to pack */ ext4_fsblk_t pright; /* 48 8 */ unsigned int len; /* 56 4 */ unsigned int flags; /* 60 4 */ /* --- cacheline 1 boundary (64 bytes) --- */ /* size: 64, cachelines: 1, members: 9 */ /* sum members: 52, holes: 3, sum holes: 12 */ }; Grouping 32-bit members together closes these holes and shrinks the structure by 12 bytes. which is important since ext4 can get on the hairy edge of stack overruns. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
-
- 06 Jul, 2009 2 commits
-
-
Eric Sandeen authored
Ted noticed a stack-deep callchain through writepages->ext4_mb_regular_allocator->ext4_mb_init_cache->submit_bh ... With all the static functions in mballoc.c, gcc helpfully inlines for us, and we get something like this: ext4_mb_regular_allocator (232 bytes stack) ext4_mb_init_cache (232 bytes stack) submit_bh (starts 464 deeper) the 2 ext4 functions here get several others inlined; by telling gcc not to inline them, we can save stack space for when we head off into submit_bh land and associated block layer callchains. The following noinlined functions are only called once, so this won't impact any other callchains: ext4_mb_regular_allocator (104) (was 232) ext4_mb_find_by_goal (56) (noinlined) ext4_mb_init_group (24) (noinlined) ext4_mb_init_cache (136) (was 232) ext4_mb_generate_buddy (88) (noinlined) ext4_mb_generate_from_pa (40) (noinlined) submit_bh ext4_mb_simple_scan_group (24) (noinlined) ext4_mb_scan_aligned (56) (noinlined) ext4_mb_complex_scan_group (40) (noinlined) ext4_mb_try_best_found (24) (noinlined) now when we head off into submit_bh() we're only 264 bytes deeper in stack than when we entered ext4_mb_regular_allocator() (vs. 464 bytes before). Every 200 bytes helps. :) Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
-
Theodore Ts'o authored
The ext4_block_truncate_page() function previously called grab_cache_page(), which called find_or_create_page() with the __GFP_FS flag potentially set. This could cause a deadlock if the system is low on memory and it attempts a memory reclaim, which could potentially call back into ext4. So we need to call find_or_create_page() directly, and remove the __GFP_FP flag to avoid this potential deadlock. Thanks to Roland Dreier for reporting a lockdep warning which showed this problem. [20786.363249] ================================= [20786.363257] [ INFO: inconsistent lock state ] [20786.363265] 2.6.31-2-generic #14~rbd4gitd960eea9 [20786.363270] --------------------------------- [20786.363276] inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage. [20786.363285] http/8397 [HC0[0]:SC0[0]:HE1:SE1] takes: [20786.363291] (jbd2_handle){+.+.?.}, at: [<ffffffff812008bb>] jbd2_journal_start+0xdb/0x150 [20786.363314] {IN-RECLAIM_FS-W} state was registered at: [20786.363320] [<ffffffff8108bef6>] mark_irqflags+0xc6/0x1a0 [20786.363334] [<ffffffff8108d347>] __lock_acquire+0x287/0x430 [20786.363345] [<ffffffff8108d595>] lock_acquire+0xa5/0x150 [20786.363355] [<ffffffff812008da>] jbd2_journal_start+0xfa/0x150 [20786.363365] [<ffffffff811d98a8>] ext4_journal_start_sb+0x58/0x90 [20786.363377] [<ffffffff811cce85>] ext4_delete_inode+0xc5/0x2c0 [20786.363389] [<ffffffff81146fa3>] generic_delete_inode+0xd3/0x1a0 [20786.363401] [<ffffffff81147095>] generic_drop_inode+0x25/0x30 [20786.363411] [<ffffffff81145ce2>] iput+0x62/0x70 [20786.363420] [<ffffffff81142878>] dentry_iput+0x98/0x110 [20786.363429] [<ffffffff81142a00>] d_kill+0x50/0x80 [20786.363438] [<ffffffff811444c5>] dput+0x95/0x180 [20786.363447] [<ffffffff8120de4b>] ecryptfs_d_release+0x2b/0x70 [20786.363459] [<ffffffff81142978>] d_free+0x28/0x60 [20786.363468] [<ffffffff81142a18>] d_kill+0x68/0x80 [20786.363477] [<ffffffff81142ad3>] prune_one_dentry+0xa3/0xc0 [20786.363487] [<ffffffff81142d61>] __shrink_dcache_sb+0x271/0x290 [20786.363497] [<ffffffff81142e89>] prune_dcache+0x109/0x1b0 [20786.363506] [<ffffffff81142f6f>] shrink_dcache_memory+0x3f/0x50 [20786.363516] [<ffffffff810f6d3d>] shrink_slab+0x12d/0x190 [20786.363527] [<ffffffff810f97d7>] balance_pgdat+0x4d7/0x640 [20786.363537] [<ffffffff810f9a57>] kswapd+0x117/0x170 [20786.363546] [<ffffffff810773ce>] kthread+0x9e/0xb0 [20786.363558] [<ffffffff8101430a>] child_rip+0xa/0x20 [20786.363569] [<ffffffffffffffff>] 0xffffffffffffffff [20786.363598] irq event stamp: 15997 [20786.363603] hardirqs last enabled at (15997): [<ffffffff81125f9d>] kmem_cache_alloc+0xfd/0x1a0 [20786.363617] hardirqs last disabled at (15996): [<ffffffff81125f01>] kmem_cache_alloc+0x61/0x1a0 [20786.363628] softirqs last enabled at (15966): [<ffffffff810631ea>] __do_softirq+0x14a/0x220 [20786.363641] softirqs last disabled at (15861): [<ffffffff8101440c>] call_softirq+0x1c/0x30 [20786.363651] [20786.363653] other info that might help us debug this: [20786.363660] 3 locks held by http/8397: [20786.363665] #0: (&sb->s_type->i_mutex_key#8){+.+.+.}, at: [<ffffffff8112ed24>] do_truncate+0x64/0x90 [20786.363685] #1: (&sb->s_type->i_alloc_sem_key#5){+++++.}, at: [<ffffffff81147f90>] notify_change+0x250/0x350 [20786.363707] #2: (jbd2_handle){+.+.?.}, at: [<ffffffff812008bb>] jbd2_journal_start+0xdb/0x150 [20786.363724] [20786.363726] stack backtrace: [20786.363734] Pid: 8397, comm: http Tainted: G C 2.6.31-2-generic #14~rbd4gitd960eea9 [20786.363741] Call Trace: [20786.363752] [<ffffffff8108ad7c>] print_usage_bug+0x18c/0x1a0 [20786.363763] [<ffffffff8108b0c0>] ? check_usage_backwards+0x0/0xb0 [20786.363773] [<ffffffff8108bad2>] mark_lock_irq+0xf2/0x280 [20786.363783] [<ffffffff8108bd97>] mark_lock+0x137/0x1d0 [20786.363793] [<ffffffff8108c03c>] mark_held_locks+0x6c/0xa0 [20786.363803] [<ffffffff8108c11f>] lockdep_trace_alloc+0xaf/0xe0 [20786.363813] [<ffffffff810efbac>] __alloc_pages_nodemask+0x7c/0x180 [20786.363824] [<ffffffff810e9411>] ? find_get_page+0x91/0xf0 [20786.363835] [<ffffffff8111d3b7>] alloc_pages_current+0x87/0xd0 [20786.363845] [<ffffffff810e9827>] __page_cache_alloc+0x67/0x70 [20786.363856] [<ffffffff810eb7df>] find_or_create_page+0x4f/0xb0 [20786.363867] [<ffffffff811cb3be>] ext4_block_truncate_page+0x3e/0x460 [20786.363876] [<ffffffff812008da>] ? jbd2_journal_start+0xfa/0x150 [20786.363885] [<ffffffff812008bb>] ? jbd2_journal_start+0xdb/0x150 [20786.363895] [<ffffffff811c6415>] ? ext4_meta_trans_blocks+0x75/0xf0 [20786.363905] [<ffffffff811e8d8b>] ext4_ext_truncate+0x1bb/0x1e0 [20786.363916] [<ffffffff811072c5>] ? unmap_mapping_range+0x75/0x290 [20786.363926] [<ffffffff811ccc28>] ext4_truncate+0x498/0x630 [20786.363938] [<ffffffff8129b4ce>] ? _raw_spin_unlock+0x5e/0xb0 [20786.363947] [<ffffffff81107306>] ? unmap_mapping_range+0xb6/0x290 [20786.363957] [<ffffffff8108c3ad>] ? trace_hardirqs_on+0xd/0x10 [20786.363966] [<ffffffff811ffe58>] ? jbd2_journal_stop+0x1f8/0x2e0 [20786.363976] [<ffffffff81107690>] vmtruncate+0xb0/0x110 [20786.363986] [<ffffffff81147c05>] inode_setattr+0x35/0x170 [20786.363995] [<ffffffff811c9906>] ext4_setattr+0x186/0x370 [20786.364005] [<ffffffff81147eab>] notify_change+0x16b/0x350 [20786.364014] [<ffffffff8112ed30>] do_truncate+0x70/0x90 [20786.364021] [<ffffffff8112f48b>] T.657+0xeb/0x110 [20786.364021] [<ffffffff8112f4be>] sys_ftruncate+0xe/0x10 [20786.364021] [<ffffffff81013132>] system_call_fastpath+0x16/0x1b Reported-by: Roland Dreier <roland@digitalvampire.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
-
- 21 Jun, 2009 2 commits
-
-
Theodore Ts'o authored
Fix jbd2_dev_to_name(), a function used when pretty-printting jbd2 and ext4 tracepoints. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
-
Theodore Ts'o authored
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
-
- 04 Jul, 2009 9 commits
-
-
Linus Torvalds authored
-
Paul Mundt authored
Commit 537a1bf0 (fbdev: add mutex for fb_mmap locking) introduces a ->mm_lock mutex for protecting smem assignments. Unfortunately in the case of sm501fb these happen quite early in the initialization code, well before the mutex_init() that takes place in register_framebuffer(), leading to: Badness at kernel/mutex.c:207 Pid : 1, Comm: swapper CPU : 0 Not tainted (2.6.31-rc1-00284-g529ba0d9-dirty #2273) PC is at __mutex_lock_slowpath+0x72/0x1bc PR is at __mutex_lock_slowpath+0x66/0x1bc ... matroxfb appears to have the same issue and has solved it with an early mutex_init(), so we do the same for sm501fb. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: (27 commits) parisc: use generic atomic64 on 32-bit parisc: superio: fix build breakage parisc: Fix PCI resource allocation on non-PAT SBA machines parisc: perf: wire up sys_perf_counter_open parisc: add task_pt_regs macro parisc: wire sys_perf_counter_open to sys_ni_syscall parisc: inventory.c, fix bloated stack frame parisc: processor.c, fix bloated stack frame parisc: fix compile warning in mm/init.c parisc: remove dead code from sys_parisc32.c parisc: wire up rt_tgsigqueueinfo parisc: ensure broadcast tlb purge runs single threaded parisc: fix "delay!" timer handling parisc: fix mismatched parenthesis in memcpy.c parisc: Fix gcc 4.4 warning in lba_pci.c parisc: add parameter to read_cr16() parisc: decode_exc.c should include kernel.h parisc: remove obsolete hw_interrupt_type parisc: fix irq compile bugs in arch/parisc/kernel/irq.c parisc: advertise PCI devs after "assign_resources" ... Manually fixed up trivial conflicts in tools/perf/perf.h due to addition of SH vs HPPA perf-counter support.
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: fix pcap adc locking mfd: sm501, fix lock imbalance
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
* 'for-2.6.31' of git://linux-nfs.org/~bfields/linux: NFSD: Don't hold unrefcounted creds over call to nfsd_setuser()
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Fix CONFIG_FLATMEM version of pfn_valid() MIPS: Reorganize Cavium OCTEON PCI support. Update Yoichi Yuasa's e-mail address MIPS: Allow suspend and hibernation again on uniprocessor kernels. MIPS: 64-bit: Fix o32 core dump MIPS: BC47xx: Fix SSB irq setup MIPS: CMP: Update sync-r4k for current kernel MIPS: CMP: Move gcmp_probe to before the SMP ops MIPS: CMP: activate CMP support MIPS: CMP: Extend IPI handling to CPU number MIPS: CMP: Extend the GIC IPI interrupts beyond 32 MIPS: Define __arch_swab64 for all mips r2 cpus MIPS: Update VR41xx GPIO driver to use gpiolib MIPS: Hookup new syscalls sys_rt_tgsigqueueinfo and sys_perf_counter_open. MIPS: Malta: Remove unnecessary function prototypes MIPS: MT: Remove unnecessary semicolons MIPS: Add support for Texas Instruments AR7 System-on-a-Chip
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: sound: do not set DEVNAME for OSS devices ALSA: hda - Add sanity check in PCM open callback ALSA: hda - Call snd_pcm_lib_hw_rates() again after codec open callback ALSA: hda - Avoid invalid formats and rates with shared SPDIF ALSA: hda - Improve ASUS eeePC 1000 mixer ALSA: hda - Add GPIO1 control at muting with HP laptops ALSA: usx2y - reparent sound device ALSA: snd_usb_caiaq: reparent sound device sound: virtuoso: fix Xonar D1/DX silence after resume ASoC: Only disable pxa2xx-i2s clocks if we enabled them ALSA: hda - Add quirk for HP 6930p ALSA: hda - Add missing static to patch_ca0110() ASoC: OMAP: fix OMAP1510 broken PCM pointer callback ASoC: remove BROKEN from Efika and pcm030 fabric drivers ASoC: Fix typo in MPC5200 PSC AC97 driver Kconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixesLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kbuild: finally remove the obsolete variable $TOPDIR gitignore: ignore scripts/ihex2fw Kbuild: Disable the -Wformat-security gcc flag gitignore: ignore gcov output files kbuild: deb-pkg ship changelog Add new __init_task_data macro to be used in arch init_task.c files. asm-generic/vmlinux.lds.h: shuffle INIT_TASK* macro names in vmlinux.lds.h Add new macros for page-aligned data and bss sections. asm-generic/vmlinux.lds.h: Fix up RW_DATA_SECTION definition.
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: don't merge requests of different failfast settings cciss: Ignore stale commands after reboot
-
- 03 Jul, 2009 23 commits
-
-
Takashi Iwai authored
* fix/soundcore: sound: do not set DEVNAME for OSS devices
-
Takashi Iwai authored
* fix/hda: ALSA: hda - Add sanity check in PCM open callback ALSA: hda - Call snd_pcm_lib_hw_rates() again after codec open callback ALSA: hda - Avoid invalid formats and rates with shared SPDIF ALSA: hda - Improve ASUS eeePC 1000 mixer ALSA: hda - Add GPIO1 control at muting with HP laptops
-
Kay Sievers authored
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Add some sanity checks of struct snd_pcm_hardware fields in the PCM open callback of hda driver. This makes a bit easier to debug any PCM setup errors in the codec side. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The PCM rates bit field may have been changed by the codec open callback. In that case, we need to reset rate_min and rate_max. So, simply call snd_pcm_lib_hw_rates() again after the codec open callback. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Check whether formats and rates don't result in zero due to the restriction of SPDIF sharing. If any of them can be zero, disable the SPDIF sharing mode instead. Otherwise it will lead to a PCM configuration error. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Tejun Heo authored
Block layer used to merge requests and bios with different failfast settings. This caused regular IOs to fail prematurely when they were merged into failfast requests for readahead. Niel Lambrechts could trigger the problem semi-reliably on ext4 when resuming from STR. ext4 uses readahead when reading inodes and combined with the deterministic extra SATA PHY exception cycle during resume on the specific configuration, non-readahead inode read would fail causing ext4 errors. Please read the following thread for details. http://lkml.org/lkml/2009/5/23/21 This patch makes block layer reject merging if the failfast settings don't match. This is correct but likely to lower IO performance by preventing regular IOs from mingling into surrounding readahead requests. Changes to allow such mixed merges and handle errors correctly will be added later. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Niel Lambrechts <niel.lambrechts@gmail.com> Cc: Theodore Tso <tytso@mit.edu> Signed-off-by: Jens Axboe <axboe@carl.(none)>
-
Hannes Reinecke authored
When doing an unexpected shutdown like kexec the cciss firmware might still have some commands in flight, which it is trying to complete. The driver is doing it's best on resetting the HBA, but sadly there's a firmware issue causing the firmware _not_ to abort or drop old commands. So the firmware will send us commands which we haven't accounted for, causing the driver to panic. With this patch we're just ignoring these commands as there is nothing we could be doing with them anyway. Signed-off-by: Hannes Reinecke <hare@suse.de> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <axboe@carl.(none)>
-
Ralf Baechle authored
For systems which do not define PHYS_OFFSET as 0 pfn_valid() may falsely have returned 0 on most configurations. Bug introduced by commit 752fbeb2e3555c0d236e992f1195fd7ce30e728d (linux-mips.org) rsp. 6f284a2c (kernel.org) titled "[MIPS] FLATMEM: introduce PHYS_OFFSET." Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
Move the cavium PCI files to the arch/mips/pci directory. Also cleanup comment formatting and code layout. Code from pci-common.c, was moved into other files. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Yoichi Yuasa authored
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Pavel Machek <pavel@ucw.cz>
-
Yong Zhang authored
If an o32 process generates a core dump on a 64 bit kernel, the core file will not be correctly recognized. This is because ELF_CORE_COPY_REGS and ELF_CORE_COPY_TASK_REGS are not correctly defined for o32 and will use the default register set which would be CONFIG_64BIT in asm/elf.h. So we'll switch to use the right register defines in this situation by checking for WANT_COMPAT_REG_H and use the right defines of ELF_CORE_COPY_REGS and ELF_CORE_COPY_TASK_REGS. [Ralf: made ELF_CORE_COPY_TASK_REGS() bullet-proof against funny arguments.] Signed-off-by: Yong Zhang <yong.zhang@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
matthieu castet authored
The current ssb irq setup in ssb_mipscore_init has the problem that it configures some device on some irq without checking that the irq is not taken by an other device. For example in my case PCI host is on irq 0 and IPSEC on irq 3. The current code: - store in dev->irq that IPSEC irq is 3 + 2 - do a set_irq 0->3 on PCI host But now IPSEC irq is not routed anymore to the mips code and dev->irq is wrong. This causes a problem described in [1]. This patch tries to solve the problem by making set_irq configure the device we want to take the irq on the shared irq0. The previous example becomes: - store in dev->irq that IPSEC irq is 3 + 2 - do a set_irq 0->3 on PCI host: - irq 3 is already taken by IPSEC. do a set_irq 3->0 on IPSEC I also added some code to print the irq configuration after irq setup to allow easier debugging. And I add extra checking in ssb_mips_irq to report device without irq or device with not routed irq. [1] http://www.danm.de/files/src/bcm5365p/REPORTED_DEVICESSigned-off-by: Matthieu CASTET <castet.matthieu@free.fr> Acked-by : Michael Buesch <mb@bu3sch.de> Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Tim Anderson authored
This revises the sync-4k so it will boot and operate since the removal of expirelo from the timer code. Signed-off-by: Tim Anderson <tanderson@mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Tim Anderson authored
This is to move the gcmp_probe call to before the use of and selection of the smp_ops functions. This allows malta with 1004K to work. Signed-off-by: Tim Anderson <tanderson@mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Tim Anderson authored
Most of the CMP support was added before, this mostly correct compile problems but adds a platform specific translation for the interrupt number based on cpu number. Signed-off-by: Tim Anderson <tanderson@mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Tim Anderson authored
This takes the current IPI interrupt assignment from the fix number of 4 to the number of CPUs defined in the system. Signed-off-by: Tim Anderson <tanderson@mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Tim Anderson authored
This patch extends the GIC interrupt handling beyond the current 32 bit range as well as extending the number of interrupts based on the number of CPUs. Signed-off-by: Tim Anderson <tanderson@mvista.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
Some CPUs implement mipsr2, but because they are a super-set of mips64r2 do not define CONFIG_CPU_MIPS64_R2. Cavium OCTEON falls into this category. We would still like to use the optimized implementation, so since we have already checked for CONFIG_CPU_MIPSR2, checking for CONFIG_64BIT instead of CONFIG_CPU_MIPS64_R2 is sufficient. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Yoichi Yuasa authored
Signed-off-by: Yoichi Yuasa <yyuasa@linux.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
[Ralf: I fixed up the numbering in the comment in scall64-n32.S.] Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Dmitri Vorobiev authored
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-