Commit de481ba9 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: (27 commits)
  parisc: use generic atomic64 on 32-bit
  parisc: superio: fix build breakage
  parisc: Fix PCI resource allocation on non-PAT SBA machines
  parisc: perf: wire up sys_perf_counter_open
  parisc: add task_pt_regs macro
  parisc: wire sys_perf_counter_open to sys_ni_syscall
  parisc: inventory.c, fix bloated stack frame
  parisc: processor.c, fix bloated stack frame
  parisc: fix compile warning in mm/init.c
  parisc: remove dead code from sys_parisc32.c
  parisc: wire up rt_tgsigqueueinfo
  parisc: ensure broadcast tlb purge runs single threaded
  parisc: fix "delay!" timer handling
  parisc: fix mismatched parenthesis in memcpy.c
  parisc: Fix gcc 4.4 warning in lba_pci.c
  parisc: add parameter to read_cr16()
  parisc: decode_exc.c should include kernel.h
  parisc: remove obsolete hw_interrupt_type
  parisc: fix irq compile bugs in arch/parisc/kernel/irq.c
  parisc: advertise PCI devs after "assign_resources"
  ...

Manually fixed up trivial conflicts in tools/perf/perf.h due to addition
of SH vs HPPA perf-counter support.
parents dd0888c2 64daa443
......@@ -16,6 +16,8 @@ config PARISC
select RTC_DRV_GENERIC
select INIT_ALL_POSSIBLE
select BUG
select HAVE_PERF_COUNTERS
select GENERIC_ATOMIC64 if !64BIT
help
The PA-RISC microprocessor is designed by Hewlett-Packard and used
in many of their workstations & servers (HP9000 700 and 800 series,
......
......@@ -222,13 +222,13 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
#define atomic_add(i,v) ((void)(__atomic_add_return( ((int)(i)),(v))))
#define atomic_sub(i,v) ((void)(__atomic_add_return(-((int)(i)),(v))))
#define atomic_add(i,v) ((void)(__atomic_add_return( (i),(v))))
#define atomic_sub(i,v) ((void)(__atomic_add_return(-(i),(v))))
#define atomic_inc(v) ((void)(__atomic_add_return( 1,(v))))
#define atomic_dec(v) ((void)(__atomic_add_return( -1,(v))))
#define atomic_add_return(i,v) (__atomic_add_return( ((int)(i)),(v)))
#define atomic_sub_return(i,v) (__atomic_add_return(-((int)(i)),(v)))
#define atomic_add_return(i,v) (__atomic_add_return( (i),(v)))
#define atomic_sub_return(i,v) (__atomic_add_return(-(i),(v)))
#define atomic_inc_return(v) (__atomic_add_return( 1,(v)))
#define atomic_dec_return(v) (__atomic_add_return( -1,(v)))
......@@ -336,7 +336,11 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
#endif /* CONFIG_64BIT */
#else /* CONFIG_64BIT */
#include <asm-generic/atomic64.h>
#endif /* !CONFIG_64BIT */
#include <asm-generic/atomic-long.h>
......
/* $Id: dma.h,v 1.2 1999/04/27 00:46:18 deller Exp $
* linux/include/asm/dma.h: Defines for using and allocating dma channels.
/* asm/dma.h: Defines for using and allocating dma channels.
* Written by Hennus Bergman, 1992.
* High DMA channel support & info by Hannu Savolainen
* and John Boyd, Nov. 1992.
......
#ifndef __ASM_PARISC_PERF_COUNTER_H
#define __ASM_PARISC_PERF_COUNTER_H
/* parisc only supports software counters through this interface. */
static inline void set_perf_counter_pending(void) { }
#endif /* __ASM_PARISC_PERF_COUNTER_H */
......@@ -18,6 +18,7 @@
#include <asm/types.h>
#include <asm/system.h>
#include <asm/percpu.h>
#endif /* __ASSEMBLY__ */
#define KERNEL_STACK_SIZE (4*PAGE_SIZE)
......@@ -127,6 +128,8 @@ struct thread_struct {
unsigned long flags;
};
#define task_pt_regs(tsk) ((struct pt_regs *)&((tsk)->thread.regs))
/* Thread struct flags. */
#define PARISC_UAC_NOPRINT (1UL << 0) /* see prctl and unaligned.c */
#define PARISC_UAC_SIGBUS (1UL << 1)
......
......@@ -168,8 +168,8 @@ static inline void set_eiem(unsigned long val)
/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*. */
#define __ldcw(a) ({ \
unsigned __ret; \
__asm__ __volatile__(__LDCW " 0(%1),%0" \
: "=r" (__ret) : "r" (a)); \
__asm__ __volatile__(__LDCW " 0(%2),%0" \
: "=r" (__ret), "+m" (*(a)) : "r" (a)); \
__ret; \
})
......
......@@ -12,14 +12,12 @@
* N class systems, only one PxTLB inter processor broadcast can be
* active at any one time on the Merced bus. This tlb purge
* synchronisation is fairly lightweight and harmless so we activate
* it on all SMP systems not just the N class. We also need to have
* preemption disabled on uniprocessor machines, and spin_lock does that
* nicely.
* it on all systems not just the N class.
*/
extern spinlock_t pa_tlb_lock;
#define purge_tlb_start(x) spin_lock(&pa_tlb_lock)
#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock)
#define purge_tlb_start(flags) spin_lock_irqsave(&pa_tlb_lock, flags)
#define purge_tlb_end(flags) spin_unlock_irqrestore(&pa_tlb_lock, flags)
extern void flush_tlb_all(void);
extern void flush_tlb_all_local(void *);
......@@ -63,14 +61,16 @@ static inline void flush_tlb_mm(struct mm_struct *mm)
static inline void flush_tlb_page(struct vm_area_struct *vma,
unsigned long addr)
{
unsigned long flags;
/* For one page, it's not worth testing the split_tlb variable */
mb();
mtsp(vma->vm_mm->context,1);
purge_tlb_start();
purge_tlb_start(flags);
pdtlb(addr);
pitlb(addr);
purge_tlb_end();
purge_tlb_end(flags);
}
void __flush_tlb_range(unsigned long sid,
......
......@@ -807,8 +807,12 @@
#define __NR_dup3 (__NR_Linux + 312)
#define __NR_pipe2 (__NR_Linux + 313)
#define __NR_inotify_init1 (__NR_Linux + 314)
#define __NR_preadv (__NR_Linux + 315)
#define __NR_pwritev (__NR_Linux + 316)
#define __NR_rt_tgsigqueueinfo (__NR_Linux + 317)
#define __NR_perf_counter_open (__NR_Linux + 318)
#define __NR_Linux_syscalls (__NR_inotify_init1 + 1)
#define __NR_Linux_syscalls (__NR_perf_counter_open + 1)
#define __IGNORE_select /* newselect */
......
/* $Id: cache.c,v 1.4 2000/01/25 00:11:38 prumpf Exp $
*
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
......@@ -398,12 +397,13 @@ EXPORT_SYMBOL(flush_kernel_icache_range_asm);
void clear_user_page_asm(void *page, unsigned long vaddr)
{
unsigned long flags;
/* This function is implemented in assembly in pacache.S */
extern void __clear_user_page_asm(void *page, unsigned long vaddr);
purge_tlb_start();
purge_tlb_start(flags);
__clear_user_page_asm(page, vaddr);
purge_tlb_end();
purge_tlb_end(flags);
}
#define FLUSH_THRESHOLD 0x80000 /* 0.5MB */
......@@ -444,20 +444,24 @@ extern void clear_user_page_asm(void *page, unsigned long vaddr);
void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
{
unsigned long flags;
purge_kernel_dcache_page((unsigned long)page);
purge_tlb_start();
purge_tlb_start(flags);
pdtlb_kernel(page);
purge_tlb_end();
purge_tlb_end(flags);
clear_user_page_asm(page, vaddr);
}
EXPORT_SYMBOL(clear_user_page);
void flush_kernel_dcache_page_addr(void *addr)
{
unsigned long flags;
flush_kernel_dcache_page_asm(addr);
purge_tlb_start();
purge_tlb_start(flags);
pdtlb_kernel(addr);
purge_tlb_end();
purge_tlb_end(flags);
}
EXPORT_SYMBOL(flush_kernel_dcache_page_addr);
......@@ -490,8 +494,10 @@ void __flush_tlb_range(unsigned long sid, unsigned long start,
if (npages >= 512) /* 2MB of space: arbitrary, should be tuned */
flush_tlb_all();
else {
unsigned long flags;
mtsp(sid, 1);
purge_tlb_start();
purge_tlb_start(flags);
if (split_tlb) {
while (npages--) {
pdtlb(start);
......@@ -504,7 +510,7 @@ void __flush_tlb_range(unsigned long sid, unsigned long start,
start += PAGE_SIZE;
}
}
purge_tlb_end();
purge_tlb_end(flags);
}
}
......
......@@ -170,23 +170,27 @@ static void __init pagezero_memconfig(void)
static int __init
pat_query_module(ulong pcell_loc, ulong mod_index)
{
pdc_pat_cell_mod_maddr_block_t pa_pdc_cell;
pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell;
unsigned long bytecnt;
unsigned long temp; /* 64-bit scratch value */
long status; /* PDC return value status */
struct parisc_device *dev;
pa_pdc_cell = kmalloc(sizeof (*pa_pdc_cell), GFP_KERNEL);
if (!pa_pdc_cell)
panic("couldn't allocate memory for PDC_PAT_CELL!");
/* return cell module (PA or Processor view) */
status = pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index,
PA_VIEW, &pa_pdc_cell);
PA_VIEW, pa_pdc_cell);
if (status != PDC_OK) {
/* no more cell modules or error */
return status;
}
temp = pa_pdc_cell.cba;
dev = alloc_pa_dev(PAT_GET_CBA(temp), &pa_pdc_cell.mod_path);
temp = pa_pdc_cell->cba;
dev = alloc_pa_dev(PAT_GET_CBA(temp), &(pa_pdc_cell->mod_path));
if (!dev) {
return PDC_OK;
}
......@@ -203,8 +207,8 @@ pat_query_module(ulong pcell_loc, ulong mod_index)
/* save generic info returned from the call */
/* REVISIT: who is the consumer of this? not sure yet... */
dev->mod_info = pa_pdc_cell.mod_info; /* pass to PAT_GET_ENTITY() */
dev->pmod_loc = pa_pdc_cell.mod_location;
dev->mod_info = pa_pdc_cell->mod_info; /* pass to PAT_GET_ENTITY() */
dev->pmod_loc = pa_pdc_cell->mod_location;
register_parisc_device(dev); /* advertise device */
......@@ -216,14 +220,14 @@ pat_query_module(ulong pcell_loc, ulong mod_index)
case PAT_ENTITY_PROC:
printk(KERN_DEBUG "PAT_ENTITY_PROC: id_eid 0x%lx\n",
pa_pdc_cell.mod[0]);
pa_pdc_cell->mod[0]);
break;
case PAT_ENTITY_MEM:
printk(KERN_DEBUG
"PAT_ENTITY_MEM: amount 0x%lx min_gni_base 0x%lx min_gni_len 0x%lx\n",
pa_pdc_cell.mod[0], pa_pdc_cell.mod[1],
pa_pdc_cell.mod[2]);
pa_pdc_cell->mod[0], pa_pdc_cell->mod[1],
pa_pdc_cell->mod[2]);
break;
case PAT_ENTITY_CA:
printk(KERN_DEBUG "PAT_ENTITY_CA: %ld\n", pcell_loc);
......@@ -243,23 +247,26 @@ pat_query_module(ulong pcell_loc, ulong mod_index)
print_ranges:
pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index,
IO_VIEW, &io_pdc_cell);
printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell.mod[1]);
for (i = 0; i < pa_pdc_cell.mod[1]; i++) {
printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell->mod[1]);
for (i = 0; i < pa_pdc_cell->mod[1]; i++) {
printk(KERN_DEBUG
" PA_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n",
i, pa_pdc_cell.mod[2 + i * 3], /* type */
pa_pdc_cell.mod[3 + i * 3], /* start */
pa_pdc_cell.mod[4 + i * 3]); /* finish (ie end) */
i, pa_pdc_cell->mod[2 + i * 3], /* type */
pa_pdc_cell->mod[3 + i * 3], /* start */
pa_pdc_cell->mod[4 + i * 3]); /* finish (ie end) */
printk(KERN_DEBUG
" IO_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n",
i, io_pdc_cell.mod[2 + i * 3], /* type */
io_pdc_cell.mod[3 + i * 3], /* start */
io_pdc_cell.mod[4 + i * 3]); /* finish (ie end) */
i, io_pdc_cell->mod[2 + i * 3], /* type */
io_pdc_cell->mod[3 + i * 3], /* start */
io_pdc_cell->mod[4 + i * 3]); /* finish (ie end) */
}
printk(KERN_DEBUG "\n");
break;
}
#endif /* DEBUG_PAT */
kfree(pa_pdc_cell);
return PDC_OK;
}
......
......@@ -120,7 +120,7 @@ int cpu_check_affinity(unsigned int irq, const struct cpumask *dest)
if (CHECK_IRQ_PER_CPU(irq)) {
/* Bad linux design decision. The mask has already
* been set; we must reset it */
cpumask_setall(&irq_desc[irq].affinity);
cpumask_setall(irq_desc[irq].affinity);
return -EINVAL;
}
......@@ -138,13 +138,13 @@ static int cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest)
if (cpu_dest < 0)
return -1;
cpumask_copy(&irq_desc[irq].affinity, dest);
cpumask_copy(irq_desc[irq].affinity, dest);
return 0;
}
#endif
static struct hw_interrupt_type cpu_interrupt_type = {
static struct irq_chip cpu_interrupt_type = {
.typename = "CPU",
.startup = cpu_startup_irq,
.shutdown = cpu_disable_irq,
......@@ -299,7 +299,7 @@ int txn_alloc_irq(unsigned int bits_wide)
unsigned long txn_affinity_addr(unsigned int irq, int cpu)
{
#ifdef CONFIG_SMP
cpumask_copy(&irq_desc[irq].affinity, cpumask_of(cpu));
cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
#endif
return per_cpu(cpu_data, cpu).txn_addr;
......@@ -356,7 +356,7 @@ void do_cpu_irq_mask(struct pt_regs *regs)
irq = eirr_to_irq(eirr_val);
#ifdef CONFIG_SMP
cpumask_copy(&dest, &irq_desc[irq].affinity);
cpumask_copy(&dest, irq_desc[irq].affinity);
if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) &&
!cpu_isset(smp_processor_id(), dest)) {
int cpu = first_cpu(dest);
......
......@@ -90,12 +90,14 @@ static inline int map_pte_uncached(pte_t * pte,
if (end > PMD_SIZE)
end = PMD_SIZE;
do {
unsigned long flags;
if (!pte_none(*pte))
printk(KERN_ERR "map_pte_uncached: page already exists\n");
set_pte(pte, __mk_pte(*paddr_ptr, PAGE_KERNEL_UNC));
purge_tlb_start();
purge_tlb_start(flags);
pdtlb_kernel(orig_vaddr);
purge_tlb_end();
purge_tlb_end(flags);
vaddr += PAGE_SIZE;
orig_vaddr += PAGE_SIZE;
(*paddr_ptr) += PAGE_SIZE;
......@@ -168,11 +170,13 @@ static inline void unmap_uncached_pte(pmd_t * pmd, unsigned long vaddr,
if (end > PMD_SIZE)
end = PMD_SIZE;
do {
unsigned long flags;
pte_t page = *pte;
pte_clear(&init_mm, vaddr, pte);
purge_tlb_start();
purge_tlb_start(flags);
pdtlb_kernel(orig_vaddr);
purge_tlb_end();
purge_tlb_end(flags);
vaddr += PAGE_SIZE;
orig_vaddr += PAGE_SIZE;
pte++;
......
/* $Id: pci.c,v 1.6 2000/01/29 00:12:05 grundler Exp $
*
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
......
/* $Id: processor.c,v 1.1 2002/07/20 16:27:06 rhirst Exp $
*
/*
* Initial setup-routines for HP 9000 based hardware.
*
* Copyright (C) 1991, 1992, 1995 Linus Torvalds
......@@ -121,22 +120,28 @@ static int __cpuinit processor_probe(struct parisc_device *dev)
if (is_pdc_pat()) {
ulong status;
unsigned long bytecnt;
pdc_pat_cell_mod_maddr_block_t pa_pdc_cell;
pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell;
#undef USE_PAT_CPUID
#ifdef USE_PAT_CPUID
struct pdc_pat_cpu_num cpu_info;
#endif
pa_pdc_cell = kmalloc(sizeof (*pa_pdc_cell), GFP_KERNEL);
if (!pa_pdc_cell)
panic("couldn't allocate memory for PDC_PAT_CELL!");
status = pdc_pat_cell_module(&bytecnt, dev->pcell_loc,
dev->mod_index, PA_VIEW, &pa_pdc_cell);
dev->mod_index, PA_VIEW, pa_pdc_cell);
BUG_ON(PDC_OK != status);
/* verify it's the same as what do_pat_inventory() found */
BUG_ON(dev->mod_info != pa_pdc_cell.mod_info);
BUG_ON(dev->pmod_loc != pa_pdc_cell.mod_location);
BUG_ON(dev->mod_info != pa_pdc_cell->mod_info);
BUG_ON(dev->pmod_loc != pa_pdc_cell->mod_location);
txn_addr = pa_pdc_cell->mod[0]; /* id_eid for IO sapic */
txn_addr = pa_pdc_cell.mod[0]; /* id_eid for IO sapic */
kfree(pa_pdc_cell);
#ifdef USE_PAT_CPUID
/* We need contiguous numbers for cpuid. Firmware's notion
......
/* $Id: setup.c,v 1.8 2000/02/02 04:42:38 prumpf Exp $
*
/*
* Initial setup-routines for HP 9000 based hardware.
*
* Copyright (C) 1991, 1992, 1995 Linus Torvalds
......
......@@ -174,68 +174,6 @@ asmlinkage long sys32_sched_rr_get_interval(pid_t pid,
return ret;
}
/*** copied from mips64 ***/
/*
* Ooo, nasty. We need here to frob 32-bit unsigned longs to
* 64-bit unsigned longs.
*/
static inline int
get_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset)
{
n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32));
if (ufdset) {
unsigned long odd;
if (!access_ok(VERIFY_WRITE, ufdset, n*sizeof(u32)))
return -EFAULT;
odd = n & 1UL;
n &= ~1UL;
while (n) {
unsigned long h, l;
__get_user(l, ufdset);
__get_user(h, ufdset+1);
ufdset += 2;
*fdset++ = h << 32 | l;
n -= 2;
}
if (odd)
__get_user(*fdset, ufdset);
} else {
/* Tricky, must clear full unsigned long in the
* kernel fdset at the end, this makes sure that
* actually happens.
*/
memset(fdset, 0, ((n + 1) & ~1)*sizeof(u32));
}
return 0;
}
static inline void
set_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset)
{
unsigned long odd;
n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32));
if (!ufdset)
return;
odd = n & 1UL;
n &= ~1UL;
while (n) {
unsigned long h, l;
l = *fdset++;
h = l >> 32;
__put_user(l, ufdset);
__put_user(h, ufdset+1);
ufdset += 2;
n -= 2;
}
if (odd)
__put_user(*fdset, ufdset);
}
struct msgbuf32 {
int mtype;
char mtext[1];
......
......@@ -413,6 +413,10 @@
ENTRY_SAME(dup3)
ENTRY_SAME(pipe2)
ENTRY_SAME(inotify_init1)
ENTRY_COMP(preadv) /* 315 */
ENTRY_COMP(pwritev)
ENTRY_COMP(rt_tgsigqueueinfo)
ENTRY_SAME(perf_counter_open)
/* Nothing yet */
......
......@@ -56,9 +56,9 @@ static unsigned long clocktick __read_mostly; /* timer cycles per tick */
*/
irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
{
unsigned long now;
unsigned long now, now2;
unsigned long next_tick;
unsigned long cycles_elapsed, ticks_elapsed;
unsigned long cycles_elapsed, ticks_elapsed = 1;
unsigned long cycles_remainder;
unsigned int cpu = smp_processor_id();
struct cpuinfo_parisc *cpuinfo = &per_cpu(cpu_data, cpu);
......@@ -71,44 +71,24 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
/* Initialize next_tick to the expected tick time. */
next_tick = cpuinfo->it_value;
/* Get current interval timer.
* CR16 reads as 64 bits in CPU wide mode.
* CR16 reads as 32 bits in CPU narrow mode.
*/
/* Get current cycle counter (Control Register 16). */
now = mfctl(16);
cycles_elapsed = now - next_tick;
if ((cycles_elapsed >> 5) < cpt) {
if ((cycles_elapsed >> 6) < cpt) {
/* use "cheap" math (add/subtract) instead
* of the more expensive div/mul method
*/
cycles_remainder = cycles_elapsed;
ticks_elapsed = 1;
while (cycles_remainder > cpt) {
cycles_remainder -= cpt;
ticks_elapsed++;
}
} else {
/* TODO: Reduce this to one fdiv op */
cycles_remainder = cycles_elapsed % cpt;
ticks_elapsed = 1 + cycles_elapsed / cpt;
}
/* Can we differentiate between "early CR16" (aka Scenario 1) and
* "long delay" (aka Scenario 3)? I don't think so.
*
* We expected timer_interrupt to be delivered at least a few hundred
* cycles after the IT fires. But it's arbitrary how much time passes
* before we call it "late". I've picked one second.
*/
if (unlikely(ticks_elapsed > HZ)) {
/* Scenario 3: very long delay? bad in any case */
printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!"
" cycles %lX rem %lX "
" next/now %lX/%lX\n",
cpu,
cycles_elapsed, cycles_remainder,
next_tick, now );
ticks_elapsed += cycles_elapsed / cpt;
}
/* convert from "division remainder" to "remainder of clock tick" */
......@@ -122,18 +102,56 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
cpuinfo->it_value = next_tick;
/* Skip one clocktick on purpose if we are likely to miss next_tick.
* We want to avoid the new next_tick being less than CR16.
* If that happened, itimer wouldn't fire until CR16 wrapped.
* We'll catch the tick we missed on the tick after that.
/* Program the IT when to deliver the next interrupt.
* Only bottom 32-bits of next_tick are writable in CR16!
*/
if (!(cycles_remainder >> 13))
next_tick += cpt;
/* Program the IT when to deliver the next interrupt. */
/* Only bottom 32-bits of next_tick are written to cr16. */
mtctl(next_tick, 16);
/* Skip one clocktick on purpose if we missed next_tick.
* The new CR16 must be "later" than current CR16 otherwise
* itimer would not fire until CR16 wrapped - e.g 4 seconds
* later on a 1Ghz processor. We'll account for the missed
* tick on the next timer interrupt.
*
* "next_tick - now" will always give the difference regardless
* if one or the other wrapped. If "now" is "bigger" we'll end up
* with a very large unsigned number.
*/
now2 = mfctl(16);
if (next_tick - now2 > cpt)
mtctl(next_tick+cpt, 16);
#if 1
/*
* GGG: DEBUG code for how many cycles programming CR16 used.
*/
if (unlikely(now2 - now > 0x3000)) /* 12K cycles */
printk (KERN_CRIT "timer_interrupt(CPU %d): SLOW! 0x%lx cycles!"
" cyc %lX rem %lX "
" next/now %lX/%lX\n",
cpu, now2 - now, cycles_elapsed, cycles_remainder,
next_tick, now );
#endif
/* Can we differentiate between "early CR16" (aka Scenario 1) and
* "long delay" (aka Scenario 3)? I don't think so.
*
* Timer_interrupt will be delivered at least a few hundred cycles
* after the IT fires. But it's arbitrary how much time passes
* before we call it "late". I've picked one second.
*
* It's important NO printk's are between reading CR16 and
* setting up the next value. May introduce huge variance.
*/
if (unlikely(ticks_elapsed > HZ)) {
/* Scenario 3: very long delay? bad in any case */
printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!"
" cycles %lX rem %lX "
" next/now %lX/%lX\n",
cpu,
cycles_elapsed, cycles_remainder,
next_tick, now );
}
/* Done mucking with unreliable delivery of interrupts.
* Go do system house keeping.
......@@ -173,7 +191,7 @@ EXPORT_SYMBOL(profile_pc);
/* clock source code */
static cycle_t read_cr16(void)
static cycle_t read_cr16(struct clocksource *cs)
{
return get_cycles();
}
......
......@@ -13,8 +13,6 @@
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* $Id: checksum.c,v 1.3 1997/12/01 17:57:34 ralf Exp $
*/
#include <linux/module.h>
#include <linux/types.h>
......
......@@ -405,7 +405,7 @@ byte_copy:
unaligned_copy:
/* possibly we are aligned on a word, but not on a double... */
if (likely(t1 & (sizeof(unsigned int)-1)) == 0) {
if (likely((t1 & (sizeof(unsigned int)-1)) == 0)) {
t2 = src & (sizeof(unsigned int) - 1);
if (unlikely(t2 != 0)) {
......
......@@ -40,7 +40,7 @@
* END_DESC
*/
#include <linux/kernel.h>
#include "float.h"
#include "sgl_float.h"
#include "dbl_float.h"
......
/* $Id: fault.c,v 1.5 2000/01/26 16:20:29 jsm Exp $
*
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
......
......@@ -370,34 +370,22 @@ static void __init setup_bootmem(void)
void free_initmem(void)
{
unsigned long addr, init_begin, init_end;
printk(KERN_INFO "Freeing unused kernel memory: ");
unsigned long addr;
unsigned long init_begin = (unsigned long)__init_begin;
unsigned long init_end = (unsigned long)__init_end;
#ifdef CONFIG_DEBUG_KERNEL
/* Attempt to catch anyone trying to execute code here
* by filling the page with BRK insns.
*
* If we disable interrupts for all CPUs, then IPI stops working.
* Kinda breaks the global cache flushing.
*/
local_irq_disable();
memset(__init_begin, 0x00,
(unsigned long)__init_end - (unsigned long)__init_begin);
flush_data_cache();
asm volatile("sync" : : );
flush_icache_range((unsigned long)__init_begin, (unsigned long)__init_end);
asm volatile("sync" : : );
local_irq_enable();
memset((void *)init_begin, 0x00, init_end - init_begin);
flush_icache_range(init_begin, init_end);
#endif
/* align __init_begin and __init_end to page size,
ignoring linker script where we might have tried to save RAM */
init_begin = PAGE_ALIGN((unsigned long)(__init_begin));
init_end = PAGE_ALIGN((unsigned long)(__init_end));
init_begin = PAGE_ALIGN(init_begin);
init_end = PAGE_ALIGN(init_end);
for (addr = init_begin; addr < init_end; addr += PAGE_SIZE) {
ClearPageReserved(virt_to_page(addr));
init_page_count(virt_to_page(addr));
......@@ -409,7 +397,8 @@ void free_initmem(void)
/* set up a new led state on systems shipped LED State panel */
pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BCOMPLETE);
printk("%luk freed\n", (init_end - init_begin) >> 10);
printk(KERN_INFO "Freeing unused kernel memory: %luk freed\n",
(init_end - init_begin) >> 10);
}
......
......@@ -1134,7 +1134,7 @@ static const struct file_operations ccio_proc_bitmap_fops = {
.llseek = seq_lseek,
.release = single_release,
};
#endif
#endif /* CONFIG_PROC_FS */
/**
* ccio_find_ioc - Find the ioc in the ioc_list
......@@ -1568,14 +1568,15 @@ static int __init ccio_probe(struct parisc_device *dev)
/* if this fails, no I/O cards will work, so may as well bug */
BUG_ON(dev->dev.platform_data == NULL);
HBA_DATA(dev->dev.platform_data)->iommu = ioc;
#ifdef CONFIG_PROC_FS
if (ioc_count == 0) {
proc_create(MODULE_NAME, 0, proc_runway_root,
&ccio_proc_info_fops);
proc_create(MODULE_NAME"-bitmap", 0, proc_runway_root,
&ccio_proc_bitmap_fops);
}
#endif
ioc_count++;
parisc_has_iommu();
......
......@@ -353,7 +353,7 @@ static unsigned int dino_startup_irq(unsigned int irq)
return 0;
}
static struct hw_interrupt_type dino_interrupt_type = {
static struct irq_chip dino_interrupt_type = {
.typename = "GSC-PCI",
.startup = dino_startup_irq,
.shutdown = dino_disable_irq,
......@@ -1019,22 +1019,22 @@ static int __init dino_probe(struct parisc_device *dev)
** It's not used to avoid chicken/egg problems
** with configuration accessor functions.
*/
bus = pci_scan_bus_parented(&dev->dev, dino_current_bus,
&dino_cfg_ops, NULL);
dino_dev->hba.hba_bus = bus = pci_scan_bus_parented(&dev->dev,
dino_current_bus, &dino_cfg_ops, NULL);
if(bus) {
pci_bus_add_devices(bus);
/* This code *depends* on scanning being single threaded
* if it isn't, this global bus number count will fail
*/
dino_current_bus = bus->subordinate + 1;
pci_bus_assign_resources(bus);
pci_bus_add_devices(bus);
} else {
printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (probably duplicate bus number %d)\n",
printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (duplicate bus number %d?)\n",
dev_name(&dev->dev), dino_current_bus);
/* increment the bus number in case of duplicates */
dino_current_bus++;
}
dino_dev->hba.hba_bus = bus;
return 0;
}
......
......@@ -188,7 +188,7 @@ static unsigned int eisa_startup_irq(unsigned int irq)
return 0;
}
static struct hw_interrupt_type eisa_interrupt_type = {
static struct irq_chip eisa_interrupt_type = {
.typename = "EISA",
.startup = eisa_startup_irq,
.shutdown = eisa_disable_irq,
......
......@@ -148,7 +148,7 @@ static unsigned int gsc_asic_startup_irq(unsigned int irq)
return 0;
}
static struct hw_interrupt_type gsc_asic_interrupt_type = {
static struct irq_chip gsc_asic_interrupt_type = {
.typename = "GSC-ASIC",
.startup = gsc_asic_startup_irq,
.shutdown = gsc_asic_disable_irq,
......@@ -158,7 +158,7 @@ static struct hw_interrupt_type gsc_asic_interrupt_type = {
.end = no_end_irq,
};
int gsc_assign_irq(struct hw_interrupt_type *type, void *data)
int gsc_assign_irq(struct irq_chip *type, void *data)
{
static int irq = GSC_IRQ_BASE;
struct irq_desc *desc;
......
......@@ -38,7 +38,7 @@ struct gsc_asic {
int gsc_common_setup(struct parisc_device *parent, struct gsc_asic *gsc_asic);
int gsc_alloc_irq(struct gsc_irq *dev); /* dev needs an irq */
int gsc_claim_irq(struct gsc_irq *dev, int irq); /* dev needs this irq */
int gsc_assign_irq(struct hw_interrupt_type *type, void *data);
int gsc_assign_irq(struct irq_chip *type, void *data);
int gsc_find_local_irq(unsigned int irq, int *global_irq, int limit);
void gsc_fixup_irqs(struct parisc_device *parent, void *ctrl,
void (*choose)(struct parisc_device *child, void *ctrl));
......
......@@ -729,7 +729,7 @@ static int iosapic_set_affinity_irq(unsigned int irq,
}
#endif
static struct hw_interrupt_type iosapic_interrupt_type = {
static struct irq_chip iosapic_interrupt_type = {
.typename = "IO-SAPIC-level",
.startup = iosapic_startup_irq,
.shutdown = iosapic_disable_irq,
......
......@@ -980,28 +980,38 @@ static void
lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev)
{
unsigned long bytecnt;
pdc_pat_cell_mod_maddr_block_t pa_pdc_cell; /* PA_VIEW */
pdc_pat_cell_mod_maddr_block_t io_pdc_cell; /* IO_VIEW */
long io_count;
long status; /* PDC return status */
long pa_count;
pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell; /* PA_VIEW */
pdc_pat_cell_mod_maddr_block_t *io_pdc_cell; /* IO_VIEW */
int i;
pa_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL);
if (!pa_pdc_cell)
return;
io_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL);
if (!pa_pdc_cell) {
kfree(pa_pdc_cell);
return;
}
/* return cell module (IO view) */
status = pdc_pat_cell_module(&bytecnt, pa_dev->pcell_loc, pa_dev->mod_index,
PA_VIEW, & pa_pdc_cell);
pa_count = pa_pdc_cell.mod[1];
PA_VIEW, pa_pdc_cell);
pa_count = pa_pdc_cell->mod[1];
status |= pdc_pat_cell_module(&bytecnt, pa_dev->pcell_loc, pa_dev->mod_index,
IO_VIEW, &io_pdc_cell);
io_count = io_pdc_cell.mod[1];
IO_VIEW, io_pdc_cell);
io_count = io_pdc_cell->mod[1];
/* We've already done this once for device discovery...*/
if (status != PDC_OK) {
panic("pdc_pat_cell_module() call failed for LBA!\n");
}
if (PAT_GET_ENTITY(pa_pdc_cell.mod_info) != PAT_ENTITY_LBA) {
if (PAT_GET_ENTITY(pa_pdc_cell->mod_info) != PAT_ENTITY_LBA) {
panic("pdc_pat_cell_module() entity returned != PAT_ENTITY_LBA!\n");
}
......@@ -1016,8 +1026,8 @@ lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev)
} *p, *io;
struct resource *r;
p = (void *) &(pa_pdc_cell.mod[2+i*3]);
io = (void *) &(io_pdc_cell.mod[2+i*3]);
p = (void *) &(pa_pdc_cell->mod[2+i*3]);
io = (void *) &(io_pdc_cell->mod[2+i*3]);
/* Convert the PAT range data to PCI "struct resource" */
switch(p->type & 0xff) {
......@@ -1096,6 +1106,9 @@ lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev)
break;
}
}
kfree(pa_pdc_cell);
kfree(io_pdc_cell);
}
#else
/* keep compiler from complaining about missing declarations */
......@@ -1509,10 +1522,6 @@ lba_driver_probe(struct parisc_device *dev)
lba_bus = lba_dev->hba.hba_bus =
pci_scan_bus_parented(&dev->dev, lba_dev->hba.bus_num.start,
cfg_ops, NULL);
if (lba_bus) {
lba_next_bus = lba_bus->subordinate + 1;
pci_bus_add_devices(lba_bus);
}
/* This is in lieu of calling pci_assign_unassigned_resources() */
if (is_pdc_pat()) {
......@@ -1533,7 +1542,6 @@ lba_driver_probe(struct parisc_device *dev)
}
pci_enable_bridges(lba_bus);
/*
** Once PCI register ops has walked the bus, access to config
** space is restricted. Avoids master aborts on config cycles.
......@@ -1543,6 +1551,11 @@ lba_driver_probe(struct parisc_device *dev)
lba_dev->flags |= LBA_FLAG_SKIP_PROBE;
}
if (lba_bus) {
lba_next_bus = lba_bus->subordinate + 1;
pci_bus_add_devices(lba_bus);
}
/* Whew! Finally done! Tell services we got this one covered. */
return 0;
}
......
......@@ -2057,6 +2057,7 @@ void sba_directed_lmmio(struct parisc_device *pci_hba, struct resource *r)
r->start = (base & ~1UL) | PCI_F_EXTEND;
size = ~ READ_REG32(reg + LMMIO_DIRECT0_MASK);
r->end = r->start + size;
r->flags = IORESOURCE_MEM;
}
}
......@@ -2093,4 +2094,5 @@ void sba_distributed_lmmio(struct parisc_device *pci_hba, struct resource *r )
size = (~READ_REG32(sba->sba_hpa + LMMIO_DIST_MASK)) / ROPES_PER_IOC;
r->start += rope * (size + 1); /* adjust base for this rope */
r->end = r->start + size;
r->flags = IORESOURCE_MEM;
}
......@@ -325,7 +325,7 @@ static unsigned int superio_startup_irq(unsigned int irq)
return 0;
}
static struct hw_interrupt_type superio_interrupt_type = {
static struct irq_chip superio_interrupt_type = {
.typename = SUPERIO,
.startup = superio_startup_irq,
.shutdown = superio_disable_irq,
......@@ -434,8 +434,8 @@ static void __init superio_parport_init(void)
0 /*base_hi*/,
PAR_IRQ,
PARPORT_DMA_NONE /* dma */,
NULL /*struct pci_dev* */),
0 /* shared irq flags */ )
NULL /*struct pci_dev* */,
0 /* shared irq flags */))
printk(KERN_WARNING PFX "Probing parallel port failed.\n");
#endif /* CONFIG_PARPORT_PC */
......
......@@ -616,6 +616,8 @@ config FB_STI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select STI_CONSOLE
select VT
default y
---help---
STI refers to the HP "Standard Text Interface" which is a set of
......
......@@ -29,6 +29,12 @@
#define cpu_relax() asm volatile("" ::: "memory")
#endif
#ifdef __hppa__
#include "../../arch/parisc/include/asm/unistd.h"
#define rmb() asm volatile("" ::: "memory")
#define cpu_relax() asm volatile("" ::: "memory");
#endif
#include <time.h>
#include <unistd.h>
#include <sys/types.h>
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment