- 13 Oct, 2008 14 commits
-
-
Mark Brown authored
Implement SPI support for WM8753, cut'n'pasting from the support for WM8731 contributed by Cliff Cai and Alan Horstmann since the wire format is the same for both codecs. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Arun KS authored
Replaces SOC_ENUM with custom SOC_SINGLE_TLV for Sidetone volume Signed-off-by:
Arun KS <arunks@mistralsolutions.com> Signed-off-by:
-
Arun KS authored
Enables DSP DAI format for McBSP in OMAP platform driver Signed-off-by:
-
Arun KS authored
Adding ASoC machine driver for osk5912 Signed-off-by:
-
Arun KS authored
ASoC codec driver for TLV320AIC23 device Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Cliff Cai authored
With MMAP enabled (DMA mode) on the AD1981, there is +/- 250ms of delay between writing data to alsa and audio starts coming out of the AD1981. Copy more data to local buffer before starting DMA Signed-off-by:
Cliff Cai <cliff.cai@analog.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
-
Cliff Cai authored
Signed-off-by:
-
Cliff Cai authored
Signed-off-by:
-
Cliff Cai authored
Signed-off-by:
-
Frank Mandarino authored
The ASoC machine drivers for this board were only provided as examples for the new AT91 ASoC platform driver. Since the ETI-B1 board is proprietary and there are other AT91 ASoC machine drivers available, it makes sense to remove these drivers. Signed-off-by:
Frank Mandarino <fmandarino@endrelia.com> Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Add a new API call snd_soc_dapm_nc_pin() which allows machine drivers to mark pins as being permanently disabled. At present this is identical to snd_soc_dapm_disable_pin() except in terms of improving the internal documentation of machine drivers that use it. The intention is that in future it will be extended to provide additional features such as hiding controls that are only relevant to paths using the disconnected pin. Signed-off-by:
-
- 10 Oct, 2008 26 commits
-
-
Matthew Ranostay authored
Add support for powering down VREF on standard headphone insertion, also powers up the VREF on a headset insertion. Signed-off-by:
Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by:
Jaroslav Kysela <perex@perex.cz>
-
Matthew Ranostay authored
Set the third microphone to a default config of a 'Line In' to be added the Input Source Mux's. Signed-off-by:
-
Mark Brown authored
Since there are now multiple OpenMoko platforms it is more important to check that the machine driver is running on the correct system. This was orgininally generated as part of the initial GTA02 machine port. Signed-off-by:
-
Takashi Iwai authored
Ingo reported Oops at probing mtpav driver. It's a race between the irq handler and the rawmidi instance registration. This patch fixes the order of registration to avoid the race. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Pedro Lopez-Cabanillas authored
The MIDI interfaces have to be detected dynamically for Edirol devices ua-700, ua-25 and ua4-fx. This patch reverses the wrong changes made by my other patch in uaxx-quirk. Signed-off-by:
Pedro Lopez-Cabanillas <pedro.lopez.cabanillas@gmail.com> Signed-off-by:
-
Takashi Iwai authored
Added a note on the dependency of old RTC stuff, which is exclusive with the new RTC class drivers. http://bugme.linux-foundation.org/show_bug.cgi?id=11430Signed-off-by: -
Richard Zhao authored
Function dapm_mux_update_power needs enum index mux and register mask value val as parameters, but it only has a parameter val, and uses it as both val and mux. snd_soc_test_bits(widget->codec, e->reg, mask, val) val is register mask here, e->texts[val] but val should be enum index mux here. This patch adds a new param mux to fix it. Signed-off-by:
Richard Zhao <linuxzsc@gmail.com> Signed-off-by:
-
Takashi Iwai authored
Increase the card components[] (and thus snd_card_info.components[], too) array size from 80 to 128 chars so that more strings can be stored. The 80 chars aren't enough for more than 2 HD-audio codecs, and this hits an ugly snd_BUG() as reported by Wu Fegguang for HP 2230s. The control protocol number is increased to 2.0.6 as well, in case it matters. Reported-by:
Wu Fengguang <wfg@linux.intel.com> Acked-by:
-
Mark Brown authored
Mic PGA Switch should be inverted in the WM8510 driver but isn't. Reported-by: ext-jukka.hynninen@vaisala.com Signed-off-by:
-
Wu Fengguang authored
fix a typo in comment for is_in_nid_list(). Signed-off-by:
-
Wu Fengguang authored
fix a typo in comment for process_unsol_events(). Signed-off-by: Wu Fengguang<wfg@linux.intel.com> Signed-off-by:
-
Takashi Iwai authored
The PCI SSID for ASROCK mobo in commit ac56445dd6a38a36c2fa91989f5f6220a9bdf97c is wrong. This patch fixes to the correct one, 1849:3662. Signed-off-by:
-
Pedro Lopez-Cabanillas authored
Renamed the old quirk function for ua-700/ua-25 to become more generic, moving the MIDI interfaces to the quirk data header. Added a new quirk for the Edirol UA-4FX. Signed-off-by:
-
Takashi Iwai authored
The endpoints should be released immediately at disconnection rather than the delayed release. This could be a reason of Oops at USB-audio device disconnection being used. Signed-off-by:
-
Clive Messer authored
ALC889A hardware (id 0x10ec0885 rev 0x100101) to use patch_alc883 Signed-off-by:
Clive Messer <clive@vacuumtube.org.uk> Signed-off-by:
-
Vedran Miletic authored
I recently got a chance to play with two boards with ALC662 rev1: * BIOSTAR TA780G M2+ * ASROCK K10N78FullHD-hSLI R3.0 Both use 3 stack, 6ch mode with digital out. Since autodetection isn't able to figure that out from BIOS, we need to specify that manually. Signed-off-by:
Vedran Miletic <rivanvx@gmail.com> Signed-off-by:
-
Vladimir Barinov authored
Signed-off-by:
-
Vedran Miletic authored
This patch adds PCI IDs for: * TerraTec DMX XFire 1024 * Hercules Gamesurround Fortissimo II * Hercules Gamesurround Fortissimo III 7.1 All those cards were supported as generic CS46xx device, so they will work as before. I'm pretty sure that first two cards work, as they have same hardware design as reference card. Not sure about Fortissimo III, but this won't break it if it worked. Tested on TerraTec DMX XFire 1024. Signed-off-by:
-
Matthew Ranostay authored
Added support for muting S/DPIF outs using the 'Digital Playback Source' muxs on supporting codecs. Signed-off-by:
-
Peter Korsgaard authored
The AppleTV needs the same handling as the 24" iMac. Signed-off-by:
Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by:
-
Herton Ronaldo Krzesinski authored
Use 3stack-6ch-dig ALC662 model for Foxconn 45CMX/45GMX/45CMX-K motherboard. Signed-off-by:
Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by:
-
Herton Ronaldo Krzesinski authored
Use 3stack-6ch-dig ALC662 model for Gigabyte 945GCM-S2L motherboard. Signed-off-by:
-
Julien Brunel authored
The test (ssc != NULL) can only be reached if the call to the function ssc_request, the result of which ssc is assigned, succeeds. Moreover, two statements assign NULL to ssc just before a return, which is useless since it is a local variable. So, we suggest to delete the test and the two assignments. A simplified version of the semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @bad_null_test@ expression x,E; @@ x = ssc_request(...) ... when != x = E * x != NULL // </smpl> Signed-off-by:
Julien Brunel <brunel@diku.dk> Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
-
Matthew Ranostay authored
Added HP laptop SND_PCI_QUIRK for STAC_HP_M4. Signed-off-by:
-
Matthew Ranostay authored
Add support for S/PDIF IN on reference boards quirks. Also disable the IEC958 capture switch on boards with GPIO0 enabled. Signed-off-by:
-
Eran Tromer authored
Add support for the E-Mu "Tracker Pre" USB sound card, following the example of the (very similar) E-Mu 0202 and E-Mu 0404 USB. As with the 0202 and 0404 USB, functionality is very limited: just a couple of sample rates, no volume/mute control, etc. Signed-off-by:
Eran Tromer <eran@tromer.org> Signed-off-by:
-
