Commit b2c4f4d7 authored by Matthew Ranostay's avatar Matthew Ranostay Committed by Jaroslav Kysela

ALSA: hda: 92xx S/PDIF In support

Add support for S/PDIF IN on reference boards quirks. Also disable the
IEC958 capture switch on boards with GPIO0 enabled.
Signed-off-by: default avatarMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarJaroslav Kysela <perex@perex.cz>
parent 97c889a7
......@@ -1245,7 +1245,7 @@ static int stac92xx_build_controls(struct hda_codec *codec)
return err;
spec->multiout.share_spdif = 1;
}
if (spec->dig_in_nid) {
if (spec->dig_in_nid && (!spec->gpio_dir & 0x01)) {
err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in_nid);
if (err < 0)
return err;
......@@ -4079,10 +4079,6 @@ again:
memcpy(&spec->private_dimux, &stac92hd73xx_dmux,
sizeof(stac92hd73xx_dmux));
/* GPIO0 High = Enable EAPD */
spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x1;
spec->gpio_data = 0x01;
switch (spec->board_config) {
case STAC_DELL_M6:
spec->init = dell_eq_core_init;
......@@ -4120,6 +4116,11 @@ again:
spec->num_dmics = STAC92HD73XX_NUM_DMICS;
spec->num_smuxes = ARRAY_SIZE(stac92hd73xx_smux_nids);
}
if (spec->board_config > STAC_92HD73XX_REF) {
/* GPIO0 High = Enable EAPD */
spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x1;
spec->gpio_data = 0x01;
}
spec->dinput_mux = &spec->private_dimux;
spec->num_pwrs = ARRAY_SIZE(stac92hd73xx_pwr_nids);
......@@ -4356,10 +4357,12 @@ again:
spec->aloopback_mask = 0x20;
spec->aloopback_shift = 0;
/* GPIO0 High = EAPD */
spec->gpio_mask = 0x01;
spec->gpio_dir = 0x01;
spec->gpio_data = 0x01;
if (spec->board_config > STAC_92HD71BXX_REF) {
/* GPIO0 = EAPD */
spec->gpio_mask = 0x01;
spec->gpio_dir = 0x01;
spec->gpio_data = 0x01;
}
spec->powerdown_adcs = 1;
spec->digbeep_nid = 0x26;
......@@ -4601,9 +4604,11 @@ static int patch_stac927x(struct hda_codec *codec)
spec->num_dmuxes = ARRAY_SIZE(stac927x_dmux_nids);
break;
default:
/* GPIO0 High = Enable EAPD */
spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x1;
spec->gpio_data = 0x01;
if (spec->board_config > STAC_D965_REF) {
/* GPIO0 High = Enable EAPD */
spec->eapd_mask = spec->gpio_mask = 0x01;
spec->gpio_dir = spec->gpio_data = 0x01;
}
spec->num_dmics = 0;
spec->init = stac927x_core_init;
......@@ -4717,6 +4722,9 @@ static int patch_stac9205(struct hda_codec *codec)
*/
spec->gpio_data = 0x01;
break;
case STAC_9205_REF:
/* SPDIF-In enabled */
break;
default:
/* GPIO0 High = EAPD */
spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x1;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment