Add missing select ARCH_OMAP_OTG on 2430sdp and 3430sdp builds.
Signed-off-by: Felipe Balbi <felipe.souza-lima-de@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fix for the Touch Screen issue on OMAP3 ES2.0.The IRQ for the TS has been defined as 3 and 2 for ES1 and ES2
and the IRQ assignment is done at run time.
Signed-off-by: Teerth Reddy <teerth@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The LCD controller (EPSON S1D13744) supports
rotation (0, 90, 180 and 270 degrees) on hardware just setting
the bits 0 and 1 of 0x28 register (LCD Panel Configuration Register).
Now it is possible to use this caps only setting the angle degree on var rotate of fb_var_screeninfo using the FBIOPUT_VSCREENINFO ioctl.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@openbossa.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Including board file board-2430osk.h missed.

drivers/i2c/chips/twl4030_core.c:480: error: `IH_TWL4030_BASE' undeclared (first use in this function)
drivers/i2c/chips/twl4030_core.c:853: error: `IH_TWL4030_END' undeclared (first use in this function)
drivers/i2c/chips/twl4030_core.c:860: error: `TWL4030_IRQNUM' undeclared (first use in this function)
drivers/i2c/chips/twl4030_gpio.c:249: error: `IH_TWL4030_GPIO_BASE' undeclared (first use in this function)
drivers/i2c/chips/twl4030_gpio.c:787: error: `IH_TWL4030_BASE' undeclared (first use in this function)
...
Signed-off-by: Francisco Alecrim <francisco.alecrim@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Including MACH_TYPE_OMAP_2430OSK missed type.

arch/arm/mach-omap2/board-2430osk.c:134: error: `MACH_TYPE_OMAP_2430OSK' undeclared here (not in a function)
arch/arm/mach-omap2/board-2430osk.c:134: error: initializer element is not constant
arch/arm/mach-omap2/board-2430osk.c:134: error: (near initialization for `__mach_desc_OMAP_2430OSK.nr')
Signed-off-by: Francisco Alecrim <francisco.alecrim@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This adds driver OMAP SPI specific changes to support OMAP 3430
Signed-off-by: Girish S G <girishsg@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

OMAP SPI device specific changes. Also, corrects SPI Clock name and id in clock34xx.
Signed-off-by: Girish S G <girishsg@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add support for software controlled power off of omap34xx and TWL4030
based devices.
Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The PRCM (0x490022E8)register was overwritten by the MMC code
which made the other peripherals like USB etc to stop working.
The following patch fixes the modification of PRCM register by
the MMC code. This patch is tested here on the OMAP2430 SDP board.
Signed-off-by: Arun K S <arunks@mistralsolutions.com>
Ack-by: Madhusudhan Chikkature Rajashekar" <madhu.cr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Remove non-exist include file.
It's changed to <asm/arch/control.h>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch adds MMC multislot support for TI OMAP H4 2420 boards.
Signed-off-by: David Cohen <david.cohen@indt.org.br>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Acked-by: Anderson Lizardo <anderson.lizardo@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adding menelaus_enable_slot() function on menelaus driver.
This function enables/disables the mmc slots on menelaus.
Signed-off-by: David Cohen <david.cohen@indt.org.br>
Acked-by: Anderson Lizardo <anderson.lizardo@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch fixes some boot-time instability problems with OMAP3430. The
GPTIMER modules can take 200 to 300 microseconds to become available after
their clocks are enabled, and without this patch, the clock framework
won't wait for them before returning from clk_enable().  If the system
attempts to access a GPTIMER register too quickly after the clk_enable(),
the system will halt with something similar to the following in the
dmtimer code:

Unhandled fault: external abort on non-linefetch (0x1028) at 0xd9032010

This is perhaps not the ideal way to solve this problem, but then again,
omap2_clk_wait_ready() is perhaps not the ideal way to wait for module
readiness.  This function is due to be replaced, but in the interim, this
patch fixes the issue.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch corrects MMC slot 2 misconfiguration on menelaus code.
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Acked-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This drops n.o. wake-ups from >128 Hz to only few per second.
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add several OMAP3430ES2-only clocks:

- DPLL5, which provides clock to onboard USB and USIM modules;

- the Customer Programmable EFUSE;

- MMC3;

- SGX, the graphics module replacing GFX;

- the bandgap temperature sensor;

- USBHOST;

- USB TLL (transceiverless link);

- the Universal Subscriber Identity Module (USIM).

The interface clock for USB TLL is on CM_ICLKEN3, which formerly was
OMAP2430-only; so also convert OMAP2430_CM_ICLKEN3 to CM_ICLKEN3.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

On the OMAP3430 architecture, some DPLL3 rates are only available on
3430ES2.  We wish to avoid inadvertently selecting these on 3430ES1.
So we need some way to mark these rates as being 3430ES2-only.  To do
so, add new rate flag RATE_IN_3430ES2, to be used for rates that only
exist on 3430ES2.  (I'm not aware of any 3430ES1-only rates, so, no
corresponding 3430ES1 flag is currently defined.)  RATE_IN_343X is
still present and used for rates which exist on all 343X-level
devices.  The current code assumes that production rates will be
identical to 3430ES2 rates, but this is easy enough to change if
necessary.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

On the OMAP3430 architecture, some clocks are only available on
3430ES1 (e.g., the GFX subsystem, and the 16.8MHz input crystal rate
option) and some clocks are only available on 3430ES2 (e.g., DPLL5,
temp sensor, etc.)  Now that OMAP3430ES revision detection is in the
tree, we can flag these so we do not try to initialize clocks that
don't exist on other ES revisions.

To do so, add new clock flags CLOCK_IN_OMAP3430ES1 and
CLOCK_IN_OMAP3430ES2, to be used for clocks that only exist on one
architecture or the other.  CLOCK_IN_OMAP343X is still present and
used for clocks which exist on all 343X-level devices.  The current
code assumes that production clocks will be identical to 3430ES2
clocks, but this is easy enough to change if necessary.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add omap_ctrl_readb et al, and make code us it.
Some registers are 8-bit on 24xx and 16-bit on 34xx.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Misc clean-up for the mux code and remove some unnecessary
ifdefs. Also change debug function so it can be used on
24xx and 34xx.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Use omap processor specific function depending on system type.
Based on an earlier patch by Klaus Pedersen <klaus.k.pedersen@nokia.com>.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch changes pin multiplexing init to allow registering
custom function. The omap_cfg_reg() func will be split into
omap processor specific functions in later patch.

This is done to make adding omap3 pin multiplexing easier.
Signed-off-by: Tony Lindgren <tony@atomide.com>

It can't be static, it gets from board-*.c files as
noted by Paul Walmsley.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge branches 'master' and 'linus'

Updates omap2 support for OneNAND on N800/N810.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

I accidentally left the Makefile changes out.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Currently, the GPIO interrupt handling is duplicating some of the work
done by the generic IRQ handlers (handle_edge_irq, handle_level_irq)
such as detecting nesting, handling re-triggers etc.  Remove this
duplication and use generic hooks based on IRQ type.

Using generic IRQ handlers ensures correct behavior when using
threaded interrupts introduced by the -rt patch.
Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The clearing was moved to the unmask hook because it is known to run
after the interrupt handler has actually run.  Before this patch, if
interrupts are threaded, the clearing/unmasking of level triggered
interrupts would be done before the threaded handler actually ran.
Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

GPIO IRQ unmask doesn't actually do anything useful.  The problem is
hidden by a separate explicit mass unmask at the end of the chained
bank handler.
Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

board-*.h are always included from hardware.h
Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch enables high speed MMC support for OMAP3430.

Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch enables high speed MMC support for OMAP2430.

Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch registers the MMC device for OMAP2430/3430.

Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch adds OMAP2430/3430 MMC board specific file.

Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch adds MMC controller driver for OMAP2430/3430.

Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch updates the OMAP2430/3430 MMC clock structures to use the id field.

Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch adds bq27000 battery moniter HDQ slave driver support.

Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch adds OMAP2430/3430 HDQ/1-Wire driver support.

Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>