Adding support to rotation on blizzard

The LCD controller (EPSON S1D13744) supports
rotation (0, 90, 180 and 270 degrees) on hardware just setting
the bits 0 and 1 of 0x28 register (LCD Panel Configuration Register).
Now it is possible to use this caps only setting the angle degree on var rotate of fb_var_screeninfo using the FBIOPUT_VSCREENINFO ioctl.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@openbossa.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

drivers/video/omap/blizzard.c

@@ -44,6 +44,7 @@
 #define BLIZZARD_CLK_SRC			0x0e
 #define BLIZZARD_MEM_BANK0_ACTIVATE		0x10
 #define BLIZZARD_MEM_BANK0_STATUS		0x14
+#define BLIZZARD_PANEL_CONFIGURATION		0x28
 #define BLIZZARD_HDISP				0x2a
 #define BLIZZARD_HNDP				0x2c
 #define BLIZZARD_VDISP0				0x2e
@@ -908,6 +909,35 @@ static int blizzard_set_scale(int plane, int orig_w, int orig_h,
 	return 0;
 }
 
+static int blizzard_set_rotate(int angle)
+{
+	u32 l;
+
+	l = blizzard_read_reg(BLIZZARD_PANEL_CONFIGURATION);
+	l &= ~0x03;
+
+	switch (angle) {
+	case 0:
+		l = l | 0x00;
+		break;
+	case 90:
+		l = l | 0x03;
+		break;
+	case 180:
+		l = l | 0x02;
+		break;
+	case 270:
+		l = l | 0x01;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	blizzard_write_reg(BLIZZARD_PANEL_CONFIGURATION, l);
+
+	return 0;
+}
+
 static int blizzard_enable_plane(int plane, int enable)
 {
 	if (enable)
@@ -1285,7 +1315,8 @@ static void blizzard_get_caps(int plane, struct omapfb_caps *caps)
 	caps->ctrl |= OMAPFB_CAPS_MANUAL_UPDATE |
 		OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE |
 		OMAPFB_CAPS_WINDOW_SCALE |
-		OMAPFB_CAPS_WINDOW_OVERLAY;
+		OMAPFB_CAPS_WINDOW_OVERLAY |
+		OMAPFB_CAPS_WINDOW_ROTATE;
 	if (blizzard.te_connected)
 		caps->ctrl |= OMAPFB_CAPS_TEARSYNC;
 	caps->wnd_color |= (1 << OMAPFB_COLOR_RGB565) |
@@ -1560,6 +1591,7 @@ struct lcd_ctrl blizzard_ctrl = {
 	.setup_plane		= blizzard_setup_plane,
 	.set_scale		= blizzard_set_scale,
 	.enable_plane		= blizzard_enable_plane,
+	.set_rotate		= blizzard_set_rotate,
 	.update_window		= blizzard_update_window_async,
 	.sync			= blizzard_sync,
 	.suspend		= blizzard_suspend,

drivers/video/omap/omapfb_main.c

@@ -64,6 +64,7 @@ static struct caps_table_struct ctrl_caps[] = {
 	{ OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE, "pixel double window" },
 	{ OMAPFB_CAPS_WINDOW_SCALE,   "scale window" },
 	{ OMAPFB_CAPS_WINDOW_OVERLAY, "overlay window" },
+	{ OMAPFB_CAPS_WINDOW_ROTATE,  "rotate window" },
 	{ OMAPFB_CAPS_SET_BACKLIGHT,  "backlight setting" },
 };
 
@@ -214,6 +215,13 @@ static int ctrl_change_mode(struct fb_info *fbi)
 				 offset, var->xres_virtual,
 				 plane->info.pos_x, plane->info.pos_y,
 				 var->xres, var->yres, plane->color_mode);
+	if (r < 0)
+		return r;
+
+	if (fbdev->ctrl->set_rotate != NULL)
+		if((r = fbdev->ctrl->set_rotate(var->rotate)) < 0)
+			return r;
+
 	if (fbdev->ctrl->set_scale != NULL)
 		r = fbdev->ctrl->set_scale(plane->idx,
 				   var->xres, var->yres,
@@ -597,7 +605,7 @@ static void omapfb_rotate(struct fb_info *fbi, int rotate)
 	struct omapfb_device *fbdev = plane->fbdev;
 
 	omapfb_rqueue_lock(fbdev);
-	if (cpu_is_omap15xx() && rotate != fbi->var.rotate) {
+	if (rotate != fbi->var.rotate) {
 		struct fb_var_screeninfo *new_var = &fbdev->new_var;
 
 		memcpy(new_var, &fbi->var, sizeof(*new_var));
@@ -704,28 +712,42 @@ int omapfb_update_window_async(struct fb_info *fbi,
 				void (*callback)(void *),
 				void *callback_data)
 {
+	int xres, yres;
 	struct omapfb_plane_struct *plane = fbi->par;
 	struct omapfb_device *fbdev = plane->fbdev;
-	struct fb_var_screeninfo *var;
+	struct fb_var_screeninfo *var = &fbi->var;
+
+	switch (var->rotate) {
+	case 0:
+	case 180:
+		xres = fbdev->panel->x_res;
+		yres = fbdev->panel->y_res;
+		break;
+	case 90:
+	case 270:
+		xres = fbdev->panel->y_res;
+		yres = fbdev->panel->x_res;
+		break;
+	default:
+		return -EINVAL;
+	}
 
-	var = &fbi->var;
-	if (win->x >= var->xres || win->y >= var->yres ||
-	    win->out_x > var->xres || win->out_y >= var->yres)
+	if (win->x >= xres || win->y >= yres ||
+	    win->out_x > xres || win->out_y > yres)
 		return -EINVAL;
 
 	if (!fbdev->ctrl->update_window ||
 	    fbdev->ctrl->get_update_mode() != OMAPFB_MANUAL_UPDATE)
 		return -ENODEV;
 
-	if (win->x + win->width >= var->xres)
-		win->width = var->xres - win->x;
-	if (win->y + win->height >= var->yres)
-		win->height = var->yres - win->y;
-	/* The out sizes should be cropped to the LCD size */
-	if (win->out_x + win->out_width > fbdev->panel->x_res)
-		win->out_width = fbdev->panel->x_res - win->out_x;
-	if (win->out_y + win->out_height > fbdev->panel->y_res)
-		win->out_height = fbdev->panel->y_res - win->out_y;
+	if (win->x + win->width > xres)
+		win->width = xres - win->x;
+	if (win->y + win->height > yres)
+		win->height = yres - win->y;
+	if (win->out_x + win->out_width > xres)
+		win->out_width = xres - win->out_x;
+	if (win->out_y + win->out_height > yres)
+		win->out_height = yres - win->out_y;
 	if (!win->width || !win->height || !win->out_width || !win->out_height)
 		return 0;
 

include/asm-arm/arch-omap/omapfb.h

@@ -62,6 +62,7 @@
 #define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
 #define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
 #define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
+#define OMAPFB_CAPS_WINDOW_ROTATE	0x00080000
 #define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
 
 /* Values from DSP must map to lower 16-bits */
@@ -305,6 +306,7 @@ struct lcd_ctrl {
 					   int screen_width,
 					   int pos_x, int pos_y, int width,
 					   int height, int color_mode);
+	int		(*set_rotate)	  (int angle);
 	int		(*setup_mem)	  (int plane, size_t size,
 					   int mem_type, unsigned long *paddr);
 	int		(*mmap)		  (struct fb_info *info,