- 10 Oct, 2007 40 commits
-
-
Hans Verkuil authored
Correctly attribute the origin of the driver to Kazuhiko Kawakami. It took some time to get the S-O-B line from the original tvaudio patch author, but here it is. Signed-off-by:
Kazuhiko Kawakami <kazz-0@mail.goo.ne.jp> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
When changing channels the audio has to be muted. This is done by calling CX2341X_ENC_MUTE_AUDIO and by muted the audio input. The latter is not necessary and is now removed. Signed-off-by:
-
Hans Verkuil authored
Audio muting for the tuner input was implemented by stopping the audio microcontroller and restarting it on unmute. However, it appears that this method can actually crash the audio firmware. It's rare and seems to happen with NTSC only. It has been reimplemented by setting to volume to 0. In addition, the reporting of the mute state has been improved as well: it used to be impossible to detect whether the audio was muted by the user or if it was muted due to the microcontroller trying to detect the audio standard. This is now clearly stated. Signed-off-by:
-
Hans Verkuil authored
- Split Club3D card from Yuan PG600-2, GotView PCI DVD Lite (different composite input) - Add AVerTV MCE 116 Plus (M116) card - Allow Xceive cards to be used without Xceive support Signed-off-by:
-
Hans Verkuil authored
Add support to optionally reset the IR and/or the video digitizer. Signed-off-by:
-
Hans Verkuil authored
Resetting without reloading the firmware is not enough. Sometimes the firmware is 'stuck' and needs to be reloaded. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Oleg Nesterov authored
Restore unlock of cinergyt2->wq_sem, was deleted by accident. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Steven Walter authored
With the addition of these ioctls, I'm able to watch TV with a 32-bit version of tvtime on x86_64. Signed-off-by: -
Simon Arlott authored
Since videobuf_waiton is called with intr=1, it can return -EINTR and therefore err may be non-zero. This happens when the system goes into the standby state. Without the BUG() occurring, there's no problem with standby mode while DVB is being used. Signed-off-by: -
Oliver Endriss authored
Interrupt processing fixed: First handle interrupt, then acknowledge it. Otherwise the same interrupt might occur twice. Cleaned-up i2c interrupt handler and i2c error messages. Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Oliver Endriss authored
The calculation of frequency limits ignored tuner-specific frequency limits. Range checks and GET_INFO ioctl updated accordingly. Signed-off-by:
-
Hartmut Birr authored
The min frequencies of the DVB-C frontends are wrong. In Europe, the center frequency of the lowest channel is 50.5MHz and not 51MHz. All known cards with the stv0297/tda0002x/ves1820 frontend are able to tune to this frequency. I've changed the range to the lowest channel - 1/2 bandwidth and the highest channel + 1/2 bandwidth. For the design of the dvb driver, the frequency ranges must be part of the tuner and not of the frontend itself. The same frontend may be used for different tuners. The attached patch does only fix the ranges and not the design. Signed-off-by:
Hartmut Birr <e9hack@googlemail.com> Signed-off-by:
-
Mariusz Kozlowski authored
Looks like memset() is zeroing wrong nr of bytes. Signed-off-by:
Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by:
-
Mariusz Kozlowski authored
Looks like memset() is zeroing wrong nr of bytes. Signed-off-by:
-
Mariusz Kozlowski authored
Looks like memset() is zeroing wrong nr of bytes. Signed-off-by:
-
Oliver Endriss authored
The TDA8083 supports a symbol rate from 12..30 MSym/s. The Grundig 29504-451 tuner uses the TDA8060 down-converter, which has a frequency range from 920..2200MHz. Thanks-to: Lars Buerding <lindvb@metatux.net> Signed-off-by:
-
Trent Piepho authored
Add radio support for the Thomson DTT7612 tuner. This tuner uses a different 1st intermediate frequency than the other radio tuners supported (a lot of NTSC radio tuners probably need this change too). Add a new tuner-simple parameter, radio_if. It selects the 1st IF used for radio reception. The radio frequency setting code in tuner-simple now uses this field, instead of a special case select() block for each tuner with radio support. The tuner parameters for tuners that used a 33.3 MHz RIF now set radio_if to 1 in tuner-types.c. The Thomson DTT7612 gets radio_if = 2, also add has_tda9887 = 1 and fm_gain_normal = 1. Add some defines for tda9887 bits that control IF setting in radio mode. Add a new tda9887 config option, TDA9887_RIF_41_3, that selects a 41.3 MHz radio IF. Fix the way tda9887 radio options work. The driver was modifying the default radio mode config templates based on the TDA9887_XXXX flags. This means that _all_ tuners would get the same settings. If you had a one tuner than used TDA9887_GAIN_NORMAL and one that didn't, both would get the setting. Now the tda9987 driver just checks if tuner mode is radio and then applies the config settings directly to the data being sent, just like how all the TV mode settings already work. The PLL setting math is made a little more accurate. And a grammar error in a printk is fixed. Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Trent Piepho authored
Add the advanced debug functions to the radio videodev template. One could already use them from the video and vbi devices. Signed-off-by:
-
Trent Piepho authored
If a card driver is compiled into the kernel and mt2131 or s5h1409 are compiled as modules, the kernel won't link. A compiled in driver can't use a module, so in this case the mt2131 or s5h1409 are effectively disabled w.r.t the compiled in driver and the stub attach function should be used. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Trent Piepho authored
After some tedious work with a logic probe and a magnifying glass, I've determined that GPIO 7 is used to switch between the DTT7612's Sound 4.5 MHz IF output on pin 12 and the FM 10.7MHz If output on pin 11. GPIO 2 is used to switch the card's analog sound output from from the analog input connector to the CX23883's audio DACs. So, in radio mode GPIO2 = 1 and GPIO7 = 0. Add some comments about how the HD-3000's GPIOs are connected. Delete the vmux setting for the radio, as vmux doesn't apply to radio mode. Also delete the lines setting unused gpio words to zero; it's not necessary as 0 is the default value for uninitialized fields. Signed-off-by:
-
Ian Armstrong authored
In the current driver, the field order is global. As soon as it's changed it takes immediate effect. This is a problem when the video changes order mid stream. Although it mostly works okay, the video may judder / flicker. This patch attaches the field order to the frame, so that any buffered frames will not be displayed until the correct field. In the event that the field order is changed mid stream, the driver will ensure that the previous frame is displayed for a minimum of 3 fields. These are the two original fields the frame should have occupied, plus the one extra since the new frame still has to wait for the correct field. Signed-off-by:
Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by:
-
Ian Armstrong authored
The yuv output code always compares the new frame position & size with those of the previous frame. If they are different, a flag is set to request the yuv output registers be updated when the new frame is displayed. If the incoming frames are delivered too fast, exhausting the buffers, the most recent frame already buffered will be discarded. Unfortunately, any update request will also be discarded. If the new frame matches the size & position of the now discarded frame, the yuv registers are not flagged for update & will remain in their old state. This patch preserves the register update flag in the event that a frame is dropped. Signed-off-by:
-
Ian Armstrong authored
Framebuffer timings are currently locked to the video format in use when the module is loaded. If the video format is then changed, the timings returned by the framebuffer will be for the original format. This patch ensures that the timings returned reflect the current video format. Signed-off-by:
-
Ian Armstrong authored
When the video standard is changed, there's no guarantee the framebuffer dimensions are still legal. The yuv output code uses these dimensions to calculate the size & position for the video overlay. If the framebuffer dimensions are now illegal, the output may exceed the vertical limit of the display, causing distortion. This patch adds an additional check to ensure the output doesn't exceed the limits for the current video standard, cropping if required. Signed-off-by:
-
Adrian Bunk authored
The Coverity checker spotted that we have already oops'ed if "fe" was NULL. Since "fe" being NULL seems impossible at this point this patch removes the NULL check. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
-
Janne Grunau authored
The new firmware returns the data of the REQUEST_POLL_RC request in reversed order. The default is RC5, but it can be adjusted using a module parameter. Signed-off-by:
Janne Grunau <janne-dvb@grunau.be> Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
-
Patrick Boettcher authored
Thanks to Matt Doran I found that there the module parameter description was not OK. Signed-off-by:
-
Janne Grunau authored
line-breaks in dib0700-remote-query function fixed. Signed-off-by:
-
Patrick Boettcher authored
Forgot to initialize the timf_default field. Signed-off-by:
-
Matt Doran authored
In some areas in the world the broadcasters are not using the same cellid for each transmitter in a SFN. The DiBcom has problems with that setup. The module parameter buggy_sfn_workaround makes it re-usable. Signed-off-by:
Matt Doran <matt.doran@papercut.biz> Signed-off-by:
-
Patrick Boettcher authored
Fix for size of remote control keys in DiB0700. Signed-off-by:
-
Patrick Boettcher authored
Add support Compro VideoMate 500 with DiB7000PC. Another design of Compro uses the DiB7000PC and it has new USB ids. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: -
Janne Grunau authored
Copied from drivers/media/dvb/dvb-usb/nova-t-usb2.c Signed-off-by:
-
Janne Grunau authored
This patch adds remote control support for the Hauppauge Nova-T 500 using the same keys as for STK7700PD. Signed-off-by:
-
Patrick Boettcher authored
This changeset adds support for DiB7070P-based devices by adding the dib0070-driver and putting the appropriate layouts into dib0700_devices.c It also includes a new firmware for the dib0700 which is necessary to make the DiB7070-boards work and it also should fix the i2c-problems on some boards. Signed-off-by:
Jean-Philippe Sibers <jpsibers@dibcom.fr> Signed-off-by:
Patrick Boettcher <pboettcher@dibcom.fr> Signed-off-by:
-
Patrick Boettcher authored
This changesets syncs the OpenSource driver for DiBcom demodulators with version 2.1.3 of DiBcom reference driver. There were some improvements since the last release for linux-dvb, e.g.: - stepped AGC startup - less space for initialization - diversity synchronization Furthermore this changeset contains the following things: - latest AGC settings for MT2266-based devices (namely Nova-TD and other) will improve the sensitivity - support for STK7700D reference design in dib0700-devices - remove some line-breaks when debugging is enabled - getting rid of layer between frontend_parameters and ofdm_channel used in dib*-drivers Signed-off-by:
-
Mariusz Kozlowski authored
Signed-off-by:
-
