By mapping two 1MB sections we save some 4k table entries
and decrease TLB pressure. Recommended by Richard Woodruff.

Modifiy common clock.h for omap2, add omap1 specific clock.h

arch/arm/plat-omap/dsp/dsp_core.c:760: warning: initialization from
incompatible pointer type
arch/arm/plat-omap/dsp/dsp_mem.c:1579: warning: initialization from
incompatible pointer type

Signed-off-by: Dirk Behme <dirk.behme_at_de.bosch.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fixed a typo in SRAM detection for 330 and changed the detection
to use cpu_is_omap15xx() as noted by Gonzales Laurent.

This patch contains the following changes:

- Move omap1 specific clock code into mach-omap1/clock.c leaving only
  common code shared between omap1 and omap2 to plat-omap/clock.c.

- Move clock.h and sram.h header files to include/asm-arm/arch-omap/

- Change clock init to register omap1 specific functions with
  plat-omap/clock.c

- Some clean-up of code

This patch makes no functional changes to omap1 clocks.

Clock update to support clock idling

Fixed compile for omap2

Fixed compile for omap1

Added common devices.c to plat-omap for I2C and MMC init

Fixed mux compile warning

OMAP2_MUX_CFG to MUX_CFG_24XX

Split pin multiplexing tables from mux.h into mux.c files in omap1 and
omap2. Also added support for some 24xx pins.

Move omap_serial_init() to happen after board specific map_io().
Patch based on Kyungmin Park's suggestion.

Add support for Palm Tungsten E PDA

Fore more info, please see http://palmtelinux.sourceforge.net

No output from compressed image on CONFIG_MACH_OMAP_PALMTE

Reset DMA channels in init and add support for 330

Signed-off-by: Kevin Hilman <kevin@hilman.org>

Search and replace of CONFIG_ARCH_OMAP1510 with CONFIG_ARCH_OMAP15XX

According to spru602b.pdf TRM, 1510 has 192K of SRAM, not 512K

Fixed MMC compile

   CC [M]  sound/arm/omap-aic23.o
sound/arm/omap-aic23.c: In function snd_omap_aic23_suspend'
Signed-off-by: Dirk Behme <dirk.behme_at_de.bosch.com>

CONFIG_SENSORS_TLV320AIC23_MODULE is missing:
     CC [M]  sound/arm/omap-alsa-mixer.o
sound/arm/omap-alsa-mixer.c: In function SND_OMAP_WRITE'
sound/arm/omap-alsa-mixer.c: In function MIXER_NAME' undeclared (first
use in this function)
sound/arm/omap-alsa-mixer.c:487: error: (Each undeclared identifier is
reported only once
sound/arm/omap-alsa-mixer.c:487: error: for each function it appears in.)
Signed-off-by: Dirk Behme <dirk.behme_at_de.bosch.com>
Btw: omap-alsa-mixer.c will not compile if CONFIG_SENSORS_TLV320AIC23 or
CONFIG_SENSORS_TLV320AIC23_MODULE aren't defined. May be this ifdef
should be removed?

    CC      drivers/video/omap/omapfb_main.o
drivers/video/omap/omapfb_main.c: In function omapfb_suspend'
drivers/video/omap/omapfb_main.c: At top level:
drivers/video/omap/omapfb_main.c:1645: warning: initialization from
incompatible pointer type
drivers/video/omap/omapfb_main.c:1646: warning: initialization from
incompatible pointer type
drivers/video/omap/omapfb_main.c:1702: warning: initialization from
incompatible pointer type
drivers/video/omap/omapfb_main.c:1704: warning: initialization from
incompatible pointer type
drivers/video/omap/omapfb_main.c:1704: warning: initialization from
incompatible pointer type
drivers/video/omap/omapfb_main.c:1705: warning: initialization from
incompatible pointer type
drivers/video/omap/omapfb_main.c:1728: warning: initialization from
incompatible pointer type

Signed-off-by: Dirk Behme <dirk.behme_at_de.bosch.com>

Add basic 330 cpu support. 330 is handled as 15xx.

POSIX timers were triggering too fast. This was caused by incorrect
CLOCK_TICK_RATE for 32KHz timer.

This fixes the problem where UART index != UART line, because some of
the UARTs are disabled. Also cleans up serial init.

Fixed compile for I2C

Sync with mainline

Fixed merge conflicts

Two weeks after 2.6.13: starting to calm things down.

Switch to a space optimized version of local_irq_disable() for ColdFire
platforms. Also add reboot support for the Freescale M5272 platform.
Patch originally submitted by Philippe De Muyter <phdm@macqel.be>.

Add reboot support for the Freescale M523x ColdFire platform. Patch originally
submitted by Jate Sujjavanich.
Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Specialized startup code for the 68328 based DragenEngine board.
It doesn't easily fit into the common 68x328 startup code framework.
It doesn't want any of the common hardware setup to be done here.
Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Implement the scattergather support macros for m68knommu targets.
Patch originally submitted by Leon Woestenberg <leonw@mailcan.com>.
Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add better support for flushing the cache's on some ColdFire processors.
The 5249 cache code is now enabled (it was stubbed out), it really is
needed. Add support for the 527x and 528x families - we only use the
simple instruction cache on them.
Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>