[PATCH] ARM: OMAP: Add support for Palm Tungsten E PDA

Add support for Palm Tungsten E PDA

Fore more info, please see http://palmtelinux.sourceforge.net

arch/arm/mach-omap1/Kconfig

@@ -75,6 +75,16 @@ config MACH_NETSTAR
 	help
 	  Support for NetStar PBX. Say Y here if you have such a board.
 
+config MACH_OMAP_PALMTE
+	bool "Palm Tungsten E"
+	depends on ARCH_OMAP1 && ARCH_OMAP1510
+	help
+          Support for the Palm Tungsten E PDA. Currently only the LCD panel
+          is supported. To boot the kernel, you'll need a PalmOS compatible
+          bootloader; check out http://palmtelinux.sourceforge.net for more
+          informations.
+          Say Y here if you have such a PDA, say NO otherwise.
+
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
 	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)

arch/arm/mach-omap1/Makefile

@@ -15,6 +15,7 @@ obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
 obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o
 obj-$(CONFIG_MACH_VOICEBLUE)		+= board-voiceblue.o
 obj-$(CONFIG_MACH_NETSTAR)		+= board-netstar.o
+obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
 
 ifeq ($(CONFIG_ARCH_OMAP15XX),y)
 # Innovator-1510 FPGA

arch/arm/mach-omap1/board-palmte.c

+/*
+ * linux/arch/arm/mach-omap1/board-palmte.c
+ *
+ * Modified from board-generic.c
+ *
+ * Support for the Palm Tungsten E PDA.
+ *
+ * Original version : Laurent Gonzalez
+ *
+ * Maintainters : http://palmtelinux.sf.net
+ *                palmtelinux-developpers@lists.sf.net
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/notifier.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/board.h>
+#include <asm/arch/common.h>
+#include <asm/hardware/clock.h>
+
+static void __init omap_generic_init_irq(void)
+{
+	omap_init_irq();
+}
+
+static struct omap_usb_config palmte_usb_config __initdata = {
+	.register_dev	= 1,
+	.hmc_mode	= 0,
+	.pins[0]	= 3,
+};
+
+static struct omap_mmc_config palmte_mmc_config __initdata = {
+	.mmc [0] = {
+		.enabled 	= 1,
+		.wire4		= 1,
+		.wp_pin		= OMAP_MPUIO(3),
+		.power_pin	= -1,
+		.switch_pin	= -1,
+	},
+};
+
+static struct omap_board_config_kernel palmte_config[] = {
+	{ OMAP_TAG_USB, &palmte_usb_config },
+	{ OMAP_TAG_MMC,	&palmte_mmc_config },
+};
+
+static void __init omap_generic_init(void)
+{
+	omap_board_config = palmte_config;
+	omap_board_config_size = ARRAY_SIZE(palmte_config);
+}
+
+static void __init omap_generic_map_io(void)
+{
+	omap_map_common_io();
+}
+
+MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= omap_generic_map_io,
+	.init_irq	= omap_generic_init_irq,
+	.init_machine	= omap_generic_init,
+	.timer		= &omap_timer,
+MACHINE_END