- 27 Feb, 2009 14 commits
-
-
Dmitry Krivoschekov authored
The input queue should be used for TX on endpoints which share FIFO hardware. The host TX path wasn't doing that. Shared FIFOs are most often configured for periodic endpoints, which are mostly used for RX/IN transfers ... that's probably how this bug managed to linger for a long time. [ dbrownell@users.sourceforge.net: update patch description ] Signed-off-by: Dmitry Krivoschekov <dkrivoschekov@ru.mvista.com> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Felipe Balbi authored
request->actual is an unsigned and we should use the same variable type for fifo_count otherwise we might lose some data if request->length >= 64kbytes. [ dbrownell@users.sourceforge.net: fix compiler warning ] Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
David Brownell authored
Now that the musb build fixes for DaVinci got merged (RC3?), kick in the other bits needed to get it finally *working* in mainline: - Use clk_enable()/clk_disable() ... the "always enable USB clocks" code this originally relied on has since been removed. - Initialize the USB device only after the relevant I2C GPIOs are available, so the host side can properly enable VBUS. - Tweak init sequencing to cope with mainline's relatively late init of the I2C system bus for power switches, transceivers, and so on. Sanity tested on DM6664 EVM for host and peripheral modes; that system won't boot with CONFIG_PM enabled, so OTG can't yet be tested. Also verified on OMAP3. (Unrelated: correct the MODULE_PARM_DESC spelling of musb_debug.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Felipe Balbi <me@felipebalbi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as1218) fixes a problem with a radio-control joystick used in the "walkera 4#3" helicopter. This device responds to the initial Get-String-Descriptor request for string 0 (which is really the list of supported languages) by sending its config descriptor! The usb_get_string() routine needs to check whether it got the right type of descriptor. Oddly enough, this sort of check is already present in usb_get_descriptor(). The patch changes the error code from -EPROTO to -ENODATA, because -EPROTO shows up in so many other contexts to indicate a hardware failure rather than a firmware error. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Guillermo Jarabo <williamjap@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> ===================================================================
-
David Brownell authored
In apollon case, it only used udc, so udc configuration should select USB_OTG_UTILS also. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as1220) automatically disables stalls when g_file_storage finds itself running with an Atmel device controller, because the Atmel hardware/driver isn't capable of halting bulk endpoints correctly. Reported-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as1219) adds the IGNORE_RESIDUE flag to the unusual_devs entries for Genesys Logic's USB-IDE adapter. Although this device usually gets the residue correct, there is one command crucial to the operation of CD and DVD drives which it messes up. Tested-by: Mike Lampard <mike@mtgambier.net> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Adam Richter authored
Signed-off-by: Adam J. Richter <adam_richter2004@yahoo.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Patrik Kullman authored
I noticed that my revision of the F3507G WWAN card isn't listed in drivers/usb/serial/option.c Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Dmitriy Taychenachev authored
The Motorola MOTOMAGX phones (Z6, E8, Zn5 so far) are providing combined ACM/BLAN USB configuration. Since it has Vendor Specific class, the corresponding drivers (cdc-acm, zaurus) can't find it just by interface info. This patch adds usb id so the cdc-acm driver can properly handle this combined device. Signed-off-by: Dmitriy Taychenachev <dimichxp@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jesse Sung authored
This patch addes the BenQ 3g modem support to the option driver. From: Jesse Sung <jsung@novell.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Felipe Balbi authored
We where selecting wrong ep descriptors causing some troubles while sending files over obex interface. The problem was a typo while usb_find_endpoint() was being called for HS endpoints. Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Karsten Wiese authored
Currently ITDs are immediately recycled whenever their URB completes. However, EHCI hardware can sometimes remember some ITD state. This means that when the ITD is reused before end-of-frame it may sometimes cause the hardware to reference bogus state. This patch defers reusing such ITDs by moving them into a new ehci member cached_itd_list. ITDs resting in cached_itd_list are moved back into their stream's free_list once scan_periodic() detects that the active frame has elapsed. This makes the snd_usb_us122l driver (in kernel since .28) work right when it's hooked up through EHCI. [ dbrownell@users.sourceforge.net: comment fixups ] Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Tested-by: Philippe Carriere <philippe-f.carriere@wanadoo.fr> Tested-by: Federico Briata <federicobriata@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Li Yang authored
Clear next TD field and status field in queue head initialization code to prevent unpredictable result caused by residue of usb reset. Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
- 26 Feb, 2009 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: try committing transaction before returning ENOSPC Btrfs: add better -ENOSPC handling
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: xen/blkfront: use blk_rq_map_sg to generate ring entries block: reduce stack footprint of blk_recount_segments() cciss: shorten 30s timeout on controller reset block: add documentation for register_blkdev() block: fix bogus gcc warning for uninitialized var usage
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix 64bit __copy_tofrom_user() regression powerpc: Fix 64bit memcpy() regression powerpc: Fix load/store float double alignment handler
-
Linus Torvalds authored
It needs to happen before any firewire driver actually registers itself, and that was previously handled by having the Makefile list the core ieee1394 files before the drivers. But now there are firewire drivers in drivers/media, and the Makefile games aren't enough. So just make ieee1394_init happen earlier in the init sequence, the way all other bus layers already do. Reported-and-tested-by: Ingo Molnar <mingo@elte.hu> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Henrik Kurelid <henrik@kurelid.se> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Ben Backx <ben@bbackx.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jens Axboe authored
On occasion, the request will apparently have more segments than we fit into the ring. Jens says: > The second problem is that the block layer then appears to create one > too many segments, but from the dump it has rq->nr_phys_segments == > BLKIF_MAX_SEGMENTS_PER_REQUEST. I suspect the latter is due to > xen-blkfront not handling the merging on its own. It should check that > the new page doesn't form part of the previous page. The > rq_for_each_segment() iterates all single bits in the request, not dma > segments. The "easiest" way to do this is to call blk_rq_map_sg() and > then iterate the mapped sg list. That will give you what you are > looking for. > Here's a test patch, compiles but otherwise untested. I spent more > time figuring out how to enable XEN than to code it up, so YMMV! > Probably the sg list wants to be put inside the ring and only > initialized on allocation, then you can get rid of the sg on stack and > sg_init_table() loop call in the function. I'll leave that, and the > testing, to you. [Moved sg array into info structure, and initialize once. -J] Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
Jens Axboe authored
blk_recalc_rq_segments() requires a request structure passed in, which we don't have from blk_recount_segments(). So the latter allocates one on the stack, using > 400 bytes of stack for that. This can cause us to spill over one page of stack from ext4 at least: 0) 4560 400 blk_recount_segments+0x43/0x62 1) 4160 32 bio_phys_segments+0x1c/0x24 2) 4128 32 blk_rq_bio_prep+0x2a/0xf9 3) 4096 32 init_request_from_bio+0xf9/0xfe 4) 4064 112 __make_request+0x33c/0x3f6 5) 3952 144 generic_make_request+0x2d1/0x321 6) 3808 64 submit_bio+0xb9/0xc3 7) 3744 48 submit_bh+0xea/0x10e 8) 3696 368 ext4_mb_init_cache+0x257/0xa6a [ext4] 9) 3328 288 ext4_mb_regular_allocator+0x421/0xcd9 [ext4] 10) 3040 160 ext4_mb_new_blocks+0x211/0x4b4 [ext4] 11) 2880 336 ext4_ext_get_blocks+0xb61/0xd45 [ext4] 12) 2544 96 ext4_get_blocks_wrap+0xf2/0x200 [ext4] 13) 2448 80 ext4_da_get_block_write+0x6e/0x16b [ext4] 14) 2368 352 mpage_da_map_blocks+0x7e/0x4b3 [ext4] 15) 2016 352 ext4_da_writepages+0x2ce/0x43c [ext4] 16) 1664 32 do_writepages+0x2d/0x3c 17) 1632 144 __writeback_single_inode+0x162/0x2cd 18) 1488 96 generic_sync_sb_inodes+0x1e3/0x32b 19) 1392 16 sync_sb_inodes+0xe/0x10 20) 1376 48 writeback_inodes+0x69/0xb3 21) 1328 208 balance_dirty_pages_ratelimited_nr+0x187/0x2f9 22) 1120 224 generic_file_buffered_write+0x1d4/0x2c4 23) 896 176 __generic_file_aio_write_nolock+0x35f/0x393 24) 720 80 generic_file_aio_write+0x6c/0xc8 25) 640 80 ext4_file_write+0xa9/0x137 [ext4] 26) 560 320 do_sync_write+0xf0/0x137 27) 240 48 vfs_write+0xb3/0x13c 28) 192 64 sys_write+0x4c/0x74 29) 128 128 system_call_fastpath+0x16/0x1b Split the segment counting out into a __blk_recalc_rq_segments() helper to avoid allocating an onstack request just for checking the physical segment count. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Jens Axboe authored
If reset_devices is set for kexec, then cciss will delay 30 seconds since the old 5i controller _may_ need that long to recover. Replace the long sleep with incremental sleep and tests to reduce the 30 seconds to worst case for 5i, so that other controllers will proceed quickly. Reviewed-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Márton Németh authored
Add documentation for register_blkdev() function and for the parameters. Signed-off-by: Márton Németh <nm127@freemail.hu> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Jens Axboe authored
Newer gcc throw this warning: fs/bio.c: In function ?bio_alloc_bioset?: fs/bio.c:305: warning: ?p? may be used uninitialized in this function since it cannot figure out that 'p' is only ever used if 'bs' is non-NULL. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Mark Nelson authored
This fixes a regression introduced by commit a4e22f02 ("powerpc: Update 64bit __copy_tofrom_user() using CPU_FTR_UNALIGNED_LD_STD"). The same bug that existed in the 64bit memcpy() also exists here so fix it here too. The fix is the same as that applied to memcpy() with the addition of fixes for the exception handling code required for __copy_tofrom_user(). This stops us reading beyond the end of the source region we were told to copy. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Mark Nelson authored
This fixes a regression introduced by commit 25d6e2d7 ("powerpc: Update 64bit memcpy() using CPU_FTR_UNALIGNED_LD_STD"). This commit allowed CPUs that have the CPU_FTR_UNALIGNED_LD_STD CPU feature bit present to do the memcpy() with unaligned load doubles. But, along with this came a bug where our final load double would read bytes beyond a page boundary and into the next (unmapped) page. This was caught by enabling CONFIG_DEBUG_PAGEALLOC, The fix was to read only the number of bytes that we need to store rather than reading a full 8-byte doubleword and storing only a portion of that. In order to minimise the amount of existing code touched we use the original do_tail for the src_unaligned case. Below is an example of the regression, as reported by Sachin Sant: Unable to handle kernel paging request for data at address 0xc00000003f380000 Faulting instruction address: 0xc000000000039574 cpu 0x1: Vector: 300 (Data Access) at [c00000003baf3020] pc: c000000000039574: .memcpy+0x74/0x244 lr: d00000000244916c: .ext3_xattr_get+0x288/0x2f4 [ext3] sp: c00000003baf32a0 msr: 8000000000009032 dar: c00000003f380000 dsisr: 40000000 current = 0xc00000003e54b010 paca = 0xc000000000a53680 pid = 1840, comm = readahead enter ? for help [link register ] d00000000244916c .ext3_xattr_get+0x288/0x2f4 [ext3] [c00000003baf32a0] d000000002449104 .ext3_xattr_get+0x220/0x2f4 [ext3] (unreliab le) [c00000003baf3390] d00000000244a6e8 .ext3_xattr_security_get+0x40/0x5c [ext3] [c00000003baf3400] c000000000148154 .generic_getxattr+0x74/0x9c [c00000003baf34a0] c000000000333400 .inode_doinit_with_dentry+0x1c4/0x678 [c00000003baf3560] c00000000032c6b0 .security_d_instantiate+0x50/0x68 [c00000003baf35e0] c00000000013c818 .d_instantiate+0x78/0x9c [c00000003baf3680] c00000000013ced0 .d_splice_alias+0xf0/0x120 [c00000003baf3720] d00000000243e05c .ext3_lookup+0xec/0x134 [ext3] [c00000003baf37c0] c000000000131e74 .do_lookup+0x110/0x260 [c00000003baf3880] c000000000134ed0 .__link_path_walk+0xa98/0x1010 [c00000003baf3970] c0000000001354a0 .path_walk+0x58/0xc4 [c00000003baf3a20] c000000000135720 .do_path_lookup+0x138/0x1e4 [c00000003baf3ad0] c00000000013645c .path_lookup_open+0x6c/0xc8 [c00000003baf3b70] c000000000136780 .do_filp_open+0xcc/0x874 [c00000003baf3d10] c0000000001251e0 .do_sys_open+0x80/0x140 [c00000003baf3dc0] c00000000016aaec .compat_sys_open+0x24/0x38 [c00000003baf3e30] c00000000000855c syscall_exit+0x0/0x40 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Neuling authored
When we introduced VSX, we changed the way FPRs are stored in the thread_struct. Unfortunately we missed the load/store float double alignment handler code when updating how we access FPRs in the thread_struct. Below fixes this and merges the little/big endian case. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 25 Feb, 2009 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: emu10k1 - Fix digital/analog switch on audigy2 ZS ALSA: hda - Quirk for Acer Aspire 6530G ALSA: hda - add another MacBook Pro 3,1 SSID ALSA: fix excessive background noise introduced by OSS emulation rate shrink ALSA: aw2: do not grab every saa7146 based device ALSA: hda - Fix parse of init_verbs sysfs entry ALSA: pcxhr.h replace signed one-bit bitfields
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Don't go beyond iosapic_intr_info's arraysize [IA64] Do not go beyond ARRAY_SIZE of unw.hash [IA64] enable setting DMAR on by default
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] pata_legacy: for VLB 32bit PIO don't try tricks with slop [libata] pata_amd: program FIFO sata_mv: fix SoC interrupt breakage pata_it821x: resume from hibernation fails with RAID volume
-
Alan Cox authored
These devices are generally used with ATA anyway and it seems that some ATAPI will need us to issue the right number of words. Therefore as we can't switch mid burst on VLB devices we should only use 32bit I/O for suitable block sizes. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Alan Cox authored
With 32bit PIO we can use the posted write buffers, but only for 32bit I/O cycles. This means we must disable the FIFO for ATAPI where a final 16bit cycle may occur. Rework the FIFO logic so that we disable the FIFO then selectively re-enable it when we set the timings on AMD devices. Also fix a case where we scribbled on PCI config 0x41 of Nvidia chips when we shouldn't. Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Mark Lord authored
For some reason, sata_mv doesn't clear interrupt status during init when it's running on an SoC host adapter. If the bootloader has touched the SATA controller before starting Linux, Linux can end up enabling the SATA interrupt with events pending, which will cause the interrupt to be marked as spurious and then be disabled, which then breaks all further accesses to the controller. This patch makes the SoC path clear interrupt status on init like in the non-SoC case. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Ondrej Zary authored
Hibernation didn't work for me since I started to use IT8212 controller. I did some debugging (booting with no_console_suspend init=/bin/sh). Found that resume fails (2.6.28) with "serial number mismatch 'some garbage' != 'some other garbage'" and "revalidation failed" messages. That's because the controller firmware fills different serial number in the IDENTIFY every boot. The patch below fixes the resume simply clearing the serial number. The proper fix would be probably to fill in the serial number of the RAID volume instead. I assume that there must be something like that stored on the drives but I don't know where. Fix resume on pata_it821x RAID volume by clearing the serial number in IDENTIFY data, which is otherwise different on each boot. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: fix refcounting in device drivers ide-cd: document capacity hack it821x: remove dead URL atiixp: fix missing parentheses amd74xx: device/vendor confusion ide: ide.c 'clear' fix, update "ide=nodma" documentation
-
Hugh Dickins authored
Each time I exit Firefox, /proc/meminfo's Committed_AS goes down almost 400 kB: OVERCOMMIT_NEVER would be allowing overcommits it should prohibit. Commit fc8744ad "Stop playing silly games with the VM_ACCOUNT flag" changed shmem_file_setup() to set the shmem file's VM_ACCOUNT flag according to VM_NORESERVE not being set in the vma flags; but did so only _after_ the shmem_acct_size(flags, size) call which is expected to pre-account a shared anonymous object. It's all clearer if we switch shmem.c over to use VM_NORESERVE throughout in place of !VM_ACCOUNT. But I very nearly sent in a patch which mistakenly removed the accounting from tmpfs files: shmem_get_inode()'s memset was good for not setting VM_ACCOUNT, but now it needs to set VM_NORESERVE. Rather than setting that by default, then perhaps clearing it again in shmem_file_setup(), let's pass it as a flag to shmem_get_inode(): that allows us to remove the #ifdef CONFIG_SHMEM from shmem_file_setup(). Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Roel Kluin authored
vi arch/ia64/kernel/iosapic.c +142 static struct iosapic_intr_info { ... } iosapic_intr_info[NR_IRQS]; But at line 510 we have: for (i = 0; i <= NR_IRQS; i++) { s/<=/</ Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Roel Kluin authored
static struct { ... :114 unsigned short hash[UNW_HASH_SIZE]; ... :2152 for (index = 0; index <= UNW_HASH_SIZE; ++index) { This is a bug, isn't it? s/<=/</ Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Kyle McMartin authored
The previous commit which introduced the DMAR_DEFAULT_ON setting in drivers/pci/dmar.c neglected to add the ability for ia64 to enable the IOMMU by default. Rectify that mistake, doh! Signed-off-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Bartlomiej Zolnierkiewicz authored
During host driver module removal del_gendisk() results in a final put on drive->gendev and freeing the drive by drive_release_dev(). Convert device drivers from using struct kref to use struct device so device driver's object holds reference on ->gendev and prevents drive from prematurely going away. Also fix ->remove methods to not erroneously drop reference on a host driver by using only put_device() instead of ide*_put(). Reported-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Just copy the comment from drivers/scsi/sr.c::sr_done() (from which the capacity hack has been originated). Cc: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-