- 02 Nov, 2009 4 commits
-
-
Suresh Siddha authored
When a cpu goes offline, fixup_irqs() try to move irq's currently destined to the offline cpu to a new cpu. But this attempt will fail if the irq is recently moved to this cpu and the irq still hasn't arrived at this cpu (for non intr-remapping platforms this is when we free the vector allocation at the previous destination) that is about to go offline. This will endup with the interrupt subsystem still pointing the irq to the offline cpu, causing that irq to not work any more. Fix this by forcing the irq to complete its move (its been a long time we moved the irq to this cpu which we are offlining now) and then move this irq to a new cpu before this cpu goes offline. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Gary Hade <garyhade@us.ibm.com> Cc: Eric W. Biederman <ebiederm@xmission.com> LKML-Reference: <20091026230001.848830905@sbs-t61.sc.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Suresh Siddha authored
move_cleanup_count for each irq in irq_cfg is keeping track of the total number of cpus that need to free the corresponding vectors associated with the irq which has now been migrated to new destination. As long as this move_cleanup_count is non-zero (i.e., as long as we have n't freed the vector allocations on the old destinations) we were preventing the irq's further migration. This cleanup count is unnecessary and it is enough to not allow the irq migration till we send the cleanup vector to the previous irq destination, for which we already have irq_cfg's move_in_progress. All we need to make sure is that we free the vector at the old desintation but we don't need to wait till that gets freed. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Gary Hade <garyhade@us.ibm.com> Cc: Eric W. Biederman <ebiederm@xmission.com> LKML-Reference: <20091026230001.752968906@sbs-t61.sc.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Suresh Siddha authored
In the presence of interrupt-remapping, irqs will be migrated in the process context and we don't do (and there is no need to) irq_chip mask/unmask while migrating the interrupt. Similarly fix the fixup_irqs() that get called during cpu offline and avoid calling irq_chip mask/unmask for irqs that are ok to be migrated in the process context. While we didn't observe any race condition with the existing code, this change takes complete advantage of interrupt-remapping in the newer generation platforms and avoids any potential HW lockup's (that often worry Eric :) Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Eric W. Biederman <ebiederm@xmission.com> Cc: garyhade@us.ibm.com LKML-Reference: <20091026230001.661423939@sbs-t61.sc.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Suresh Siddha authored
There is no reason to have different fixup_irqs() for 32-bit and 64-bit kernels. Unify by using the superior 64-bit version for both the kernels. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Gary Hade <garyhade@us.ibm.com> Cc: Eric W. Biederman <ebiederm@xmission.com> LKML-Reference: <20091026230001.562512739@sbs-t61.sc.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
- 27 Oct, 2009 1 commit
-
-
Andreas Herrmann authored
Commit a98f8fd2 (x86: apic reset counter on shutdown) set the counter to max to avoid spurious interrupts when the timer is re-enabled. (In theory) you'll still get a spurious interrupt if spending more than 344 seconds with this interrupt disabled and then unmasking it. The right thing to do is to clear the register. This disables the interrupt from happening (at least it does on AMD hardware). Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <20091027100138.GB30802@alberich.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
- 15 Oct, 2009 1 commit
-
-
Cyrill Gorcunov authored
As only apic noop is used we allow to use almost any operation caller wants (and which of them noop driver supports of course). Initially it was reported by Ingo Molnar that apic noop issue a warning for pkg id (which is actually false positive and should be eliminated). So we save checking (and warning issue) for read/write operations while allow any other ops to be freely used. Also: - fix noop_cpu_to_logical_apicid, it should be 0. - rename noop_default_phys_pkg_id to noop_phys_pkg_id (we use default_ prefix for more general routines in apic subsystem). Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Maciej W. Rozycki <macro@linux-mips.org> LKML-Reference: <20091015150416.GC5331@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
- 14 Oct, 2009 7 commits
-
-
Cyrill Gorcunov authored
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: yinghai@kernel.org Cc: macro@linux-mips.org LKML-Reference: <20091014150904.GA5259@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
This warning: In file included from arch/x86/include/asm/ipi.h:23, from arch/x86/kernel/apic/apic_noop.c:27: arch/x86/include/asm/hw_irq.h:105: warning: ‘struct irq_desc’ declared inside parameter list arch/x86/include/asm/hw_irq.h:105: warning: its scope is only this definition or declaration, which is probably not what you want triggers because irq_desc is defined after hw_irq.h is included in irq.h. Since it's pointer reference only, a forward declaration of the type will solve the problem. LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Dimitri Sivanich authored
Move UV specific functionality out of the generic IO-APIC code. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> LKML-Reference: <20091013203236.GD20543@sgi.com> [ Cleaned up the code some more in their new places. ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Dimitri Sivanich authored
This patch fixes handling of uv hub irq affinity. IRQs with ALL or NODE affinity can be routed to cpus other than their originally assigned cpu. Those with CPU affinity cannot be rerouted. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> LKML-Reference: <20090930160259.GA7822@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Cyrill Gorcunov authored
In case if a system has a large number of cpus printing apics contents may consume a long time period. We limit such an output by 1 apic by default. But to have an ability to see all apics or some part of them we introduce "show_lapic" setup option which allow us to limit/unlimit the number of APICs being dumped. Example: apic=debug show_lapic=5, or apic=debug show_lapic=all Also move apic_verbosity checking upper that way so helper routines do not need to inspect it at all. Suggested-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: yinghai@kernel.org Cc: macro@linux-mips.org LKML-Reference: <20091013201022.926793122@openvz.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Cyrill Gorcunov authored
In case if apic were disabled we may use the whole apic NOOP driver instead of sparse poking the some functions in apic driver. Also NOOP would catch any inappropriate apic operation calls (not just read/write). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: yinghai@kernel.org Cc: macro@linux-mips.org LKML-Reference: <20091013201022.747817361@openvz.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Cyrill Gorcunov authored
Introduce NOOP APIC driver. We should use it in case if apic was disabled due to hardware of software/firmware problems (including user requested to disable it case). The driver is attempting to catch any inappropriate apic operation call with warning issue. Also it is possible to use some apic operation like IPI calls, read/write without checking for apic presence which should make callers code easier. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: yinghai@kernel.org Cc: macro@linux-mips.org LKML-Reference: <20091013201022.534682104@openvz.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
- 13 Oct, 2009 18 commits
-
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: cciss: Add cciss_allow_hpsa module parameter cciss: Fix multiple calls to pci_release_regions blk-settings: fix function parameter kernel-doc notation writeback: kill space in debugfs item name writeback: account IO throttling wait as iowait elv_iosched_store(): fix strstrip() misuse cfq-iosched: avoid probable slice overrun when idling cfq-iosched: apply bool value where we return 0/1 cfq-iosched: fix think time allowed for seekers cfq-iosched: fix the slice residual sign cfq-iosched: abstract out the 'may this cfqq dispatch' logic block: use proper BLK_RW_ASYNC in blk_queue_start_tag() block: Seperate read and write statistics of in_flight requests v2 block: get rid of kblock_schedule_delayed_work() cfq-iosched: fix possible problem with jiffies wraparound cfq-iosched: fix issue with rq-rq merging and fifo list ordering
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpuLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: fix compile warnings
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixesLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kbuild: revert "save ARCH & CROSS_COMPILE ..." warn about use of uninstalled kernel headers kbuild: mkcompile_h: trivial cleanups kbuild: fix warning when domainname is not available kbuild: Fix size_append issue for bzip2/lzma kernel kbuild,scripts: use non-builtin echo for '-e' kbuild: fix the binrpm-pkg target to work with KBUILD_OUTPUT set
-
Ingo Molnar authored
Commit d43c36dc ("headers: remove sched.h from interrupt.h") left some build errors in some configurations due to drivers having depended on getting header files "accidentally". Signed-off-by: Ingo Molnar <mingo@elte.hu> [ Combined several one-liners from Ingo into one single patch - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: fix possible deadlock in hidraw_read HID: fix kerneldoc comment for hid_input_report() HID: add __init/__exit macros to twinhan.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Allow all formats as default for Nvidia HDMI ALSA: aaci: ARM1176 aaci-pl041 AC97 register read timeout ALSA: hda - Fix volume-knob setup for Dell laptops with STAC9228 ALSA: hda - Fix mute sound with STAC9227/9228 codecs ALSA: bt87x - Add a whitelist for Pinnacle PCTV (11bd:0012) ALSA: hda - Fix overflow of spec->init_verbs in patch_realtek.c ALSA: ice1724 - Make call to set hw params succeed on ESI Juli@ ALSA: ice1724: Fix surround on Chaintech AV-710 ALSA: hda - Add full rates/formats support for Nvidia HDMI
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: ext3: Update documentation about ext3 quota mount options ext3: Don't update superblock write time when filesystem is read-only
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Fix twl4030 boot with twl4030 usb transceiver enabled
-
git://git.infradead.org/~dwmw2/iommu-2.6.32Linus Torvalds authored
* git://git.infradead.org/~dwmw2/iommu-2.6.32: x86: Move pci_iommu_init to rootfs_initcall() Run pci_apply_final_quirks() sooner. Mark pci_apply_final_quirks() __init rather than __devinit Rename pci_init() to pci_apply_final_quirks(), move it to quirks.c intel-iommu: Yet another BIOS workaround: Isoch DMAR unit with no TLB space intel-iommu: Decode (and ignore) RHSA entries intel-iommu: Make "Unknown DMAR structure" message more informative
-
Takashi Iwai authored
-
Takashi Iwai authored
In the commit f0613d57 ALSA: hda - Add full rates/formats support for Nvidia HDMI the flag LIMITIED_RATE_FMT_SUPPORT was set as default, as I forgot to clear before commit. Let's enable all formats/rates as default. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Philby John authored
After a reboot on an ARM1176 which amounts to a softreset, it has been noted that the ALSA driver does not get registered and the probe fails with the error "aaci-pl041 fpga:04: ac97 read back fail". In the process of reading from a register the SL1TxBusy bit is set indicating that the transceiver is busy and remains so until the default timeout occurs. Set the Power down register 0x26 to an arbitrary value as specified in the PL041 manual (page: 3-18) so that AACISL1TX/AACISL2TX registers take their default state. Signed-off-by: Philby John <pjohn@in.mvista.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The volume-knob widget needs to be set with 0x7f instead of 0xff for Dell laptops with STAC9228 codec, too, like the previous commit. Reference: Novell bnc#545013 http://bugzilla.novell.com/show_bug.cgi?id=545013Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
On FSC laptops, the sound gets muted gradually when the volume is chnaged. This is due to the wrong volume-knob widget setup. The delta bit (bit 7) shouldn't be set for these devices. This patch adds a new quirk to set the value 0x7f to the widget 0x24 instead of 0xff. Reference: Novell bnc#546006 http://bugzilla.novell.com/show_bug.cgi?id=546006Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Stephen M. Cameron authored
Add cciss_allow_hpsa module parameter. This parameter causes the cciss driver to ignore any Smart Array devices known to be supported by the hpsa driver. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Stephen M. Cameron authored
Fix multiple calls to pci_release_regions. If cciss_pci_init fails, it already does any necessary call to pci_release_regions, so this does not need to be done again in cciss_init_one in that case. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Takashi Iwai authored
ALC861-VD lenovo model causes overflow of spec->init_verbs entries due to the recent changes. Simply increase the array size to avoid the overflow. Reported-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 12 Oct, 2009 9 commits
-
-
Jan Kara authored
Signed-off-by: Jan Kara <jack@suse.cz>
-
Theodore Ts'o authored
This avoids updating the superblock write time when we are mounting the root file system read/only but we need to replay the journal; at that point, for people who are east of GMT and who make their clock tick in localtime for Windows bug-for-bug compatibility, and this will cause e2fsck to complain and force a full file system check. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: Prevent AER driver from being loaded on non-root port PCIE devices PCI: get larger bridge ranges when space is available PCI: pci.c: fix kernel-doc notation PCI quirk: TI XIO200a erroneously reports support for fast b2b transfers PCI PM: Read device power state from register after updating it PCI: remove pci_assign_resource_fixed() PCI: PCIe portdrv: remove "-driver" from driver name
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: (24 commits) ARM: force dcache flush if dcache_dirty bit set [ARM] pxa: workaround errata #37 by not using half turbo switching [ARM] pxamci: fix printing gpio numbers in pxamci_probe [ARM] pxa/csb726: adjust duplicate structure field initialization ARM: Add kmap_atomic type debugging ARM: boolean bit testing ARM: update die() output ARM: Dump code/mem oops lines with the appropriate log level ARM: Dump memory and backtrace as one printk per line ARM: 5756/1: ep93xx: introduce clk parent ARM: 5754/1: ep93xx: update i2c support ARM: 5753/1: ep93xx: remove old EP93XX_GPIO_* defines ARM: 5729/1: ep93xx: define EP93XX_*_PHYS_BASE with macros ARM: 5751/1: ep93xx/micro9: Add Micro9-Slim ARM: 5750/1: ep93xx/micro9: Update platform code ARM: 5749/1: ep93xx/micro9: Update maintainer ARM: 5752/1: SA1100: fix building of h3100 ARM: 5748/1: bcmring: fix build warning messages ARM: 5747/1: Fix the start_pg value in free_memmap() ARM: 5746/1: Handle possible translation errors in ARMv6/v7 coherent_user_range ...
-
Mike Frysinger authored
The MUSB code relies on platform implementations that currently only exists for Arm and Blackfin processors, so have the MUSB Kconfig depend upon those arches. This should prevent other arches from building MUSB via randconfig. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Stefan Richter authored
struct sockaddr_storage * can safely be used as struct sockaddr *. Suppress an "incompatible pointer type" warning. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Commit 46d57a44 ("serial: use tty_port pointers in the core code") contained two bugs that causes (rare) crashes: - the rename typoed one site - a NULL check was missed Reported-and-tested-by: Ingo Molnar <mingo@elte.hu> Cc: Greg KH <gregkh@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nitin Gupta authored
On ARM, update_mmu_cache() does dcache flush for a page only if it has a kernel mapping (page_mapping(page) != NULL). The correct behavior would be to force the flush based on dcache_dirty bit only. One of the cases where present logic would be a problem is when a RAM based block device[1] is used as a swap disk. In this case, we would have in-memory data corruption as shown in steps below: do_swap_page() { - Allocate a new page (if not already in swap cache) - Issue read from swap disk - Block driver issues flush_dcache_page() - flush_dcache_page() simply sets PG_dcache_dirty bit and does not actually issue a flush since this page has no user space mapping yet. - Now, if swap disk is almost full, this newly read page is removed from swap cache and corrsponding swap slot is freed. - Map this page anonymously in user space. - update_mmu_cache() - Since this page does not have kernel mapping (its not in page/swap cache and is mapped anonymously), it does not issue dcache flush even if dcache_dirty bit is set by flush_dcache_page() above. <user now gets stale data since dcache was never flushed> } Same problem exists on mips too. [1] example: - brd (RAM based block device) - ramzswap (RAM based compressed swap device) Signed-off-by: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
David Woodhouse authored
We want this to happen after the PCI quirks, which are now running at the very end of the fs_initcalls. This works around the BIOS problems which were originally addressed by commit db8be50c ('USB: Work around BIOS bugs by quiescing USB controllers earlier'), which was reverted in commit d93a8f82. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
-