Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: Prevent AER driver from being loaded on non-root port PCIE devices
  PCI: get larger bridge ranges when space is available
  PCI: pci.c: fix kernel-doc notation
  PCI quirk: TI XIO200a erroneously reports support for fast b2b transfers
  PCI PM: Read device power state from register after updating it
  PCI: remove pci_assign_resource_fixed()
  PCI: PCIe portdrv: remove "-driver" from driver name

drivers/pci/pci.c

@@ -513,7 +513,11 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
 	else if (state == PCI_D2 || dev->current_state == PCI_D2)
 		udelay(PCI_PM_D2_DELAY);
 
-	dev->current_state = state;
+	pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+	dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
+	if (dev->current_state != state && printk_ratelimit())
+		dev_info(&dev->dev, "Refused to change power state, "
+			"currently in D%d\n", dev->current_state);
 
 	/* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
 	 * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning
@@ -2542,10 +2546,10 @@ int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type)
 
 /**
  * pci_set_vga_state - set VGA decode state on device and parents if requested
- * @dev the PCI device
- * @decode - true = enable decoding, false = disable decoding
- * @command_bits PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY
- * @change_bridge - traverse ancestors and change bridges
+ * @dev: the PCI device
+ * @decode: true = enable decoding, false = disable decoding
+ * @command_bits: PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY
+ * @change_bridge: traverse ancestors and change bridges
  */
 int pci_set_vga_state(struct pci_dev *dev, bool decode,
 		      unsigned int command_bits, bool change_bridge)

drivers/pci/pcie/aer/aerdrv.c

@@ -53,7 +53,7 @@ static struct pci_error_handlers aer_error_handlers = {
 
 static struct pcie_port_service_driver aerdriver = {
 	.name		= "aer",
-	.port_type	= PCIE_ANY_PORT,
+	.port_type	= PCIE_RC_PORT,
 	.service	= PCIE_PORT_SERVICE_AER,
 
 	.probe		= aer_probe,

drivers/pci/pcie/portdrv_pci.c

@@ -30,7 +30,6 @@ MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
 /* global data */
-static const char device_name[] = "pcieport-driver";
 
 static int pcie_portdrv_restore_config(struct pci_dev *dev)
 {
@@ -262,7 +261,7 @@ static struct pci_error_handlers pcie_portdrv_err_handler = {
 };
 
 static struct pci_driver pcie_portdriver = {
-	.name		= (char *)device_name,
+	.name		= "pcieport",
 	.id_table	= &port_pci_ids[0],
 
 	.probe		= pcie_portdrv_probe,

drivers/pci/quirks.c

@@ -670,6 +670,25 @@ static void __devinit quirk_vt8235_acpi(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8235,	quirk_vt8235_acpi);
 
+/*
+ * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back:
+ *	Disable fast back-to-back on the secondary bus segment
+ */
+static void __devinit quirk_xio2000a(struct pci_dev *dev)
+{
+	struct pci_dev *pdev;
+	u16 command;
+
+	dev_warn(&dev->dev, "TI XIO2000a quirk detected; "
+		"secondary bus fast back-to-back transfers disabled\n");
+	list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) {
+		pci_read_config_word(pdev, PCI_COMMAND, &command);
+		if (command & PCI_COMMAND_FAST_BACK)
+			pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK);
+	}
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A,
+			quirk_xio2000a);
 
 #ifdef CONFIG_X86_IO_APIC 
 

drivers/pci/setup-bus.c

@@ -299,8 +299,17 @@ static struct resource *find_free_bus_resource(struct pci_bus *bus, unsigned lon
 		r = bus->resource[i];
 		if (r == &ioport_resource || r == &iomem_resource)
 			continue;
-		if (r && (r->flags & type_mask) == type && !r->parent)
-			return r;
+		if (r && (r->flags & type_mask) == type) {
+			if (!r->parent)
+				return r;
+			/*
+			 * if there is no child under that, we should release
+			 * and use it. don't need to reset it, pbus_size_* will
+			 * set it again
+			 */
+			if (!r->child && !release_resource(r))
+				return r;
+		}
 	}
 	return NULL;
 }

drivers/pci/setup-res.c

@@ -205,43 +205,6 @@ int pci_assign_resource(struct pci_dev *dev, int resno)
 	return ret;
 }
 
-#if 0
-int pci_assign_resource_fixed(struct pci_dev *dev, int resno)
-{
-	struct pci_bus *bus = dev->bus;
-	struct resource *res = dev->resource + resno;
-	unsigned int type_mask;
-	int i, ret = -EBUSY;
-
-	type_mask = IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH;
-
-	for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
-		struct resource *r = bus->resource[i];
-		if (!r)
-			continue;
-
-		/* type_mask must match */
-		if ((res->flags ^ r->flags) & type_mask)
-			continue;
-
-		ret = request_resource(r, res);
-
-		if (ret == 0)
-			break;
-	}
-
-	if (ret) {
-		dev_err(&dev->dev, "BAR %d: can't allocate %s resource %pR\n",
-			resno, res->flags & IORESOURCE_IO ? "I/O" : "mem", res);
-	} else if (resno < PCI_BRIDGE_RESOURCES) {
-		pci_update_resource(dev, resno);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(pci_assign_resource_fixed);
-#endif
-
 /* Sort resources by alignment */
 void pdev_sort_resources(struct pci_dev *dev, struct resource_list *head)
 {

include/linux/pci_ids.h

@@ -776,6 +776,7 @@
 #define PCI_DEVICE_ID_TI_X515		0x8036
 #define PCI_DEVICE_ID_TI_XX12		0x8039
 #define PCI_DEVICE_ID_TI_XX12_FM	0x803b
+#define PCI_DEVICE_ID_TI_XIO2000A	0x8231
 #define PCI_DEVICE_ID_TI_1130		0xac12
 #define PCI_DEVICE_ID_TI_1031		0xac13
 #define PCI_DEVICE_ID_TI_1131		0xac15