- 14 Apr, 2006 20 commits
-
-
Ping Cheng authored
This patch adds support for DTF 521, Intuos3 12x12 and 12x19 Signed-off-by: Ping Cheng <pingc@wacom.com> Acked-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Ping Cheng authored
This patch adds support for DTF 521, Intuos3 12x12, and 12x19; fixes minor data report bugs. Signed-off-by: Ping Cheng <pingc@wacom.com> Acked-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
Randy Dunlap pointed out that there now is a module_param_array_named macro available. This patch (as666) updates g_file_storage to make use of it. It also adds a comment listing the specifications documents used in the design of the driver's SCSI operation (at Pat LaVarre's request). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Daniel Ritz authored
Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Daniel Ritz authored
A new single driver for various USB touchscreen devices. It currently supports: - eGalax TouchKit - PanJit TouchSet - 3M/Microtouch - ITM Touchscreens Support for the diffent devices can be enabled/disable when CONFIG_EMBEDDED is set. Sizes for comparision: text data bss dec hex filename 2942 724 4 3670 e56 touchkitusb.ko 2647 660 0 3307 ceb mtouchusb.ko 2448 628 0 3076 c04 itmtouch.ko 4145 1012 12 5169 1431 usbtouchscreen.ko Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Folkert van Heusden authored
This patch adds support for new vendor (papouch) and one of their devices - TMU (a USB thermometer). More information: vendor homepage: http://www.papouch.com/en/ product homepage (Polish): http://www.papouch.com/shop/scripts/_detail.asp?katcislo=0188 This patch is based on the submission from Folkert van Heusden [1]. Then reviseted by Kalin KOZHUHAROV [2] and retested by Folkert. [1] http://article.gmane.org/gmane.linux.kernel/392970 [2] http://article.gmane.org/gmane.linux.kernel/393386Signed-off-by: Folkert van Heusden <folkert@vanheusden.com> Signed-off-by: Kalin KOZHUHAROV <kalin@thinrope.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Adrian Bunk authored
This patch adds proper prototypes in a header file for some global functions. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Adrian Bunk authored
This patch adds a header file with proper prototypes for two functions in drivers/usb/host/pci-quirks.c. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Luiz Fernando Capitulino authored
The usbserial's port semaphore used to synchronize serial_open() and serial_close() are strict mutexes, convert them to the mutex implementation. Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
This patch (as664) adds a comment to file_storage.c, noting that the driver is slightly non-portable because it assumes that a buffer allocated for a bulk-in endpoint will also be useable for a bulk-out endpoint. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Stern authored
I'm told that some UDC hardware may work better if it knows that receiving a short packet should always cause an error. Accordingly, this patch (as663) sets the short_not_ok flag for bulk-out transfers in g_file_storage. Oddly enough, there are no circumstances where that driver can legally receive a shorter-than-expected bulk-out packet. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Ian Abbott authored
This patch adds support for the Eclo COM to 1-Wire USB adapter <http://www.eclo.pt/products_ibutton_adapters_usb01_en.asp> to the ftdi_sio driver's device ID table. Details were provided by Martin Grill on the ftdi-sio-usb-devel mailing list and I (Ian Abbott) confirmed it matched the INF file in the Eclo's Windows driver package. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Ben Dooks authored
Fix compile errors due to functions not being defined static Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Guennadi Liakhovetski authored
Below is a patch to gadgets/net2280.[ch] which adds support for the net2282 controller. The original code was kindly provided by PLX Technology, I just merged it with the current net2280 driver in the kernel. Tested on 2.6.15.6, but only with 2282. I did the merge, so that the behaviour for the 2280 is unaffected (except for short delays for extra checks). Signed-off-by: G. Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Support for net2282 in net2280 driver.
-
Samuel Thibault authored
For easily getting fairly good accessibility, the TTY cursor should always be left at the focus location. This patch fixes the checklist by just having the list refreshed after the dialog box (hence the cursor position remains in the list). Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/mszeredi/fuse: [fuse] Direct I/O should not use fuse_reset_request [fuse] Don't init request twice [fuse] Fix accounting the number of waiting requests [fuse] fix deadlock between fuse_put_super() and request_end()
-
git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds authored
* 'tee' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] splice: add support for sys_tee() [PATCH] splice: pass offset around for ->splice_read() and ->splice_write()
-
Roland McGrath authored
This reverts most of commit 30e0fca6. It broke the case of non-leader MT exec when ptraced. I think the bug it was intended to fix was already addressed by commit 788e05a6. Signed-off-by: Roland McGrath <roland@redhat.com> Acked-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Eric W. Biederman authored
This is two distinct changes. - Not changing our real parents. - Not changing our ptrace parents. Not changing our real parents is trivially correct because both tasks have the same real parents as they are part of a thread group. Now that we demote the leader to a thread there is no longer any reason to change it's parentage. Not changing our ptrace parents is a user visible change if someone looks hard enough. I don't think user space applications will care or even notice. In the practical and I think common case a debugger will have attached to all of the threads using the same ptrace flags. From my quick skim of strace and gdb that appears to be the case. Which if true means debuggers will not notice a change. Before this point we have already generated a ptrace event in do_exit that reports the leaders pid has died so de_thread is visible to a debugger. Which means attempting to hide this case by copying flags around appears excessive. By not doing anything it avoids all of the weird locking issues between de_thread and ptrace attach, and removes one case from consideration for fixing the ptrace locking. This only addresses Oleg's first concern with ptrace_attach, that of the problems caused by reparenting. Oleg's second concern is essentially a race between ptrace_attach and release_task that causes an oops when we get to force_sig_specific. There is nothing special about de_thread with respect to that race. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Make show_mem() skip holes in a pgdat [IA64] ia64_wait_for_slaves() incorrectly reports MCA
-
- 13 Apr, 2006 3 commits
-
-
Robin Holt authored
This patch modifies ia64's show_mem() to walk the vmem_map page tables and rapidly skip forward across regions where the page tables are missing. This prevents the pfn_valid() check from causing numerous unnecessary page faults. Without this patch on a 512 node 512 cpu system where every node has four memory holes, the show_mem() call takes 1 hour 18 minutes. With this patch, it takes less than 3 seconds. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Keith Owens authored
ia64_wait_for_slaves() was changed in 2.6.17-rc1 to report the slave state. It incorrectly assumes that all slaves are for MCA, but ia64_wait_for_slaves() is also called from the INIT monarch handler. The existing message is very misleading, so correct it. Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Eric W. Biederman authored
By calling send_sig do_SAK is recursively taking the tasklist_lock, which is silly. In addition I just audited the kernel and this was the only place where tasklist_lock is taken inside of task_lock. So this one line change is a general worthwhile cleanup and it increases our options on how to fix the ptrace_attach races. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 12 Apr, 2006 17 commits
-
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/mthca: Fix max_srq_sge returned by ib_query_device for Tavor devices IB/cache: Use correct pointer to calculate size IPoIB: Use spin_lock_irq() instead of spin_lock_irqsave() IPoIB: Close race in ipoib_flush_paths() IB/mthca: Disable tuning PCI read burst size IPoIB: Make send and receive queue sizes tunable IPoIB: Wait for join to finish before freeing mcast struct IB: simplify static rate encoding IPoIB: Consolidate private neighbour data handling IB/srp: Fix memory leak in options parsing IB/mthca: Always build debugging code unless CONFIG_EMBEDDED=y IPoIB: Always build debugging code unless CONFIG_EMBEDDED=y IB/mad: fix oops in cancel_mads
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] sata_mv: properly print HC registers
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] Use pci_set_consistent_dma_mask in ixgb driver [PATCH] sky2: bad memory reference on dual port cards [PATCH] mv643xx_eth: Fix tx_timeout to only conditionally wake tx queue [PATCH] mv643xx_eth: Always free completed tx descs on tx interrupt [PATCH] net drivers: fix section attributes for gcc [PATCH] remove drivers/net/hydra.h [PATCH] drivers/net/via-rhine.c: make a function static [netdrvr b44] trim trailing whitespace [PATCH] b44: increase version to 1.00 [PATCH] b44: disable default tx pause [PATCH] via-rhine: execute bounce buffers code on Rhine-I only [PATCH] network: axnet_cs.c: add missing 'PRIV' in ei_rx_overrun [PATCH] dlink pci cards using wrong driver
-
Andreas Schwab authored
The ixgb driver is using pci_alloc_consistent, thus is should also use pci_set_consistent_dma_mask. This allows the driver to work on SGI systems. In case of an error during probing it should also disable the device again. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
Sky2 driver will oops referencing bad memory if used on a dual port card. The problem is accessing past end of MIB counter space. Applies for both 2.6.17 and 2.6.16 (with fuzz) Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Dale Farnsworth authored
After resetting the hardware on a tx_timeout, call netif_wake_queue() only if we have free tx descriptors. Also, attempt to recover if mv643xx_eth_start_xmit() is called when there are fewer free tx descriptors than expected. The BUG_ON() call we are replacing was hit on a tx_timeout that called netif_wake_queue(), indirectly via netif_device_attach(), even though we did not have enough free tx descriptors. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Brent Cook authored
Fix the tx interrupt handler to free completed tx descriptors even when NAPI is enabled. Otherwise, the tx queue would fill up resulting in poor performance and "NETDEV WATCHDOG: <iface>: transmit timed out" messages. Signed-off-by: Brent Cook <bcook@bpointsys.com> Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Randy Dunlap authored
If CONFIG_HOTPLUG=n, gcc doesn't like some __initdata to be const (rodata) and other __initdata not const, so make the non-const __initdata const. gcc errors: drivers/net/bnx2.c:66: error: version causes a section type conflict drivers/net/starfire.c:338: error: version causes a section type conflict drivers/net/typhoon.c:137: error: version causes a section type conflict drivers/net/natsemi.c:241: error: version causes a section type conflict Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Adrian Bunk authored
Remove drivers/net/hydra.h which is both unused and covered by a 4 clause BSD licence (not by the UCB). Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-By: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Adrian Bunk authored
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Roger Luethi <rl@hellgate.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Dan Aloni authored
Currently it crashes when trying to dump the registers. This is an obvious one-liner fix I suppose. Signed-off-by: Dan Aloni <da-x@monatomic.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
-
Gary Zambrano authored
Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Gary Zambrano authored
Disable default tx pause frame support. The b44 controller has a bug that generates excessive tx pause frames. Signed-off-by: Gary Zambrano <zambrano@broadcom.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Roger Luethi authored
Patch suggested by Yang Wu (pin xue <pinxue@gmail.com>). Signed-off-by: Roger Luethi <rl@hellgate.ch> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Komuro authored
Signed-off-by: komurojun-mbn@nifty.com Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
This patch fixes the problem of some Dlink cards picking the wrong driver. It looks like these cards use Yukon 1 chipset, not Yukon 2. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-