Skip to content

L
linux-davinci
Commit 2e9f0e18 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  [PATCH] Use pci_set_consistent_dma_mask in ixgb driver
  [PATCH] sky2: bad memory reference on dual port cards
  [PATCH] mv643xx_eth: Fix tx_timeout to only conditionally wake tx queue
  [PATCH] mv643xx_eth: Always free completed tx descs on tx interrupt
  [PATCH] net drivers: fix section attributes for gcc
  [PATCH] remove drivers/net/hydra.h
  [PATCH] drivers/net/via-rhine.c: make a function static
  [netdrvr b44] trim trailing whitespace
  [PATCH] b44: increase version to 1.00
  [PATCH] b44: disable default tx pause
  [PATCH] via-rhine: execute bounce buffers code on Rhine-I only
  [PATCH] network: axnet_cs.c: add missing 'PRIV' in ei_rx_overrun
  [PATCH] dlink pci cards using wrong driver
parents 6762b47a c91e468a
Hide whitespace changes
Inline Side-by-side
Showing with 67 additions and 233 deletions
drivers/net/b44.c
View file @ 2e9f0e18
......@@ -2,6 +2,7 @@
*
* Copyright (C) 2002 David S. Miller (davem@redhat.com)
* Fixed by Pekka Pietikainen (pp@ee.oulu.fi)
* Copyright (C) 2006 Broadcom Corporation.
*
* Distribute under GPL.
*/
......@@ -28,8 +29,8 @@
#define DRV_MODULE_NAME "b44"
#define PFX DRV_MODULE_NAME ": "
#define DRV_MODULE_VERSION "0.97"
#define DRV_MODULE_RELDATE "Nov 30, 2005"
#define DRV_MODULE_VERSION "1.00"
#define DRV_MODULE_RELDATE "Apr 7, 2006"
#define B44_DEF_MSG_ENABLE \
(NETIF_MSG_DRV | \
......@@ -136,7 +137,7 @@ static inline unsigned long br32(const struct b44 *bp, unsigned long reg)
return readl(bp->regs + reg);
}
static inline void bw32(const struct b44 *bp,
static inline void bw32(const struct b44 *bp,
unsigned long reg, unsigned long val)
{
writel(val, bp->regs + reg);
......@@ -286,13 +287,13 @@ static void __b44_cam_write(struct b44 *bp, unsigned char *data, int index)
val |= ((u32) data[4]) << 8;
val |= ((u32) data[5]) << 0;
bw32(bp, B44_CAM_DATA_LO, val);
val = (CAM_DATA_HI_VALID |
val = (CAM_DATA_HI_VALID |
(((u32) data[0]) << 8) |
(((u32) data[1]) << 0));
bw32(bp, B44_CAM_DATA_HI, val);
bw32(bp, B44_CAM_CTRL, (CAM_CTRL_WRITE |
(index << CAM_CTRL_INDEX_SHIFT)));
b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1);
b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1);
}
static inline void __b44_disable_ints(struct b44 *bp)
......@@ -410,25 +411,18 @@ static void __b44_set_flow_ctrl(struct b44 *bp, u32 pause_flags)
static void b44_set_flow_ctrl(struct b44 *bp, u32 local, u32 remote)
{
u32 pause_enab = bp->flags & (B44_FLAG_TX_PAUSE |
B44_FLAG_RX_PAUSE);
u32 pause_enab = 0;
if (local & ADVERTISE_PAUSE_CAP) {
if (local & ADVERTISE_PAUSE_ASYM) {
if (remote & LPA_PAUSE_CAP)
pause_enab |= (B44_FLAG_TX_PAUSE |
B44_FLAG_RX_PAUSE);
else if (remote & LPA_PAUSE_ASYM)
pause_enab |= B44_FLAG_RX_PAUSE;
} else {
if (remote & LPA_PAUSE_CAP)
pause_enab |= (B44_FLAG_TX_PAUSE |
B44_FLAG_RX_PAUSE);
}
} else if (local & ADVERTISE_PAUSE_ASYM) {
if ((remote & LPA_PAUSE_CAP) &&
(remote & LPA_PAUSE_ASYM))
pause_enab |= B44_FLAG_TX_PAUSE;
/* The driver supports only rx pause by default because
the b44 mac tx pause mechanism generates excessive
pause frames.
Use ethtool to turn on b44 tx pause if necessary.
*/
if ((local & ADVERTISE_PAUSE_CAP) &&
(local & ADVERTISE_PAUSE_ASYM)){
if ((remote & LPA_PAUSE_ASYM) &&
!(remote & LPA_PAUSE_CAP))
pause_enab |= B44_FLAG_RX_PAUSE;
}
__b44_set_flow_ctrl(bp, pause_enab);
......@@ -1063,7 +1057,7 @@ static int b44_change_mtu(struct net_device *dev, int new_mtu)
spin_unlock_irq(&bp->lock);
b44_enable_ints(bp);
return 0;
}
......@@ -1381,7 +1375,7 @@ static void b44_init_hw(struct b44 *bp)
bw32(bp, B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset);
bw32(bp, B44_DMARX_PTR, bp->rx_pending);
bp->rx_prod = bp->rx_pending;
bp->rx_prod = bp->rx_pending;
bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
......@@ -1553,9 +1547,9 @@ static void __b44_set_rx_mode(struct net_device *dev)
val |= RXCONFIG_ALLMULTI;
else
i = __b44_load_mcast(bp, dev);
for (; i < 64; i++) {
__b44_cam_write(bp, zero, i);
__b44_cam_write(bp, zero, i);
}
bw32(bp, B44_RXCONFIG, val);
val = br32(bp, B44_CAM_CTRL);
......@@ -1737,7 +1731,7 @@ static int b44_set_ringparam(struct net_device *dev,
spin_unlock_irq(&bp->lock);
b44_enable_ints(bp);
return 0;
}
......@@ -1782,7 +1776,7 @@ static int b44_set_pauseparam(struct net_device *dev,
spin_unlock_irq(&bp->lock);
b44_enable_ints(bp);
return 0;
}
......@@ -1898,7 +1892,7 @@ static int __devinit b44_get_invariants(struct b44 *bp)
bp->core_unit = ssb_core_unit(bp);
bp->dma_offset = SB_PCI_DMA;
/* XXX - really required?
/* XXX - really required?
bp->flags |= B44_FLAG_BUGGY_TXPTR;
*/
out:
......@@ -1946,7 +1940,7 @@ static int __devinit b44_init_one(struct pci_dev *pdev,
"aborting.\n");
goto err_out_free_res;
}
err = pci_set_consistent_dma_mask(pdev, (u64) B44_DMA_MASK);
if (err) {
printk(KERN_ERR PFX "No usable DMA configuration, "
......@@ -2041,9 +2035,9 @@ static int __devinit b44_init_one(struct pci_dev *pdev,
pci_save_state(bp->pdev);
/* Chip reset provides power to the b44 MAC & PCI cores, which
/* Chip reset provides power to the b44 MAC & PCI cores, which
* is necessary for MAC register access.
*/
*/
b44_chip_reset(bp);
printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name);
......@@ -2091,10 +2085,10 @@ static int b44_suspend(struct pci_dev *pdev, pm_message_t state)
del_timer_sync(&bp->timer);
spin_lock_irq(&bp->lock);
spin_lock_irq(&bp->lock);
b44_halt(bp);
netif_carrier_off(bp->dev);
netif_carrier_off(bp->dev);
netif_device_detach(bp->dev);
b44_free_rings(bp);
......
drivers/net/bnx2.c
View file @ 2e9f0e18
......@@ -63,7 +63,7 @@
/* Time in jiffies before concluding the transmitter is hung. */
#define TX_TIMEOUT (5*HZ)
static char version[] __devinitdata =
static const char version[] __devinitdata =
"Broadcom NetXtreme II Gigabit Ethernet Driver " DRV_MODULE_NAME " v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
MODULE_AUTHOR("Michael Chan <mchan@broadcom.com>");
......
drivers/net/hydra.h deleted 100644 → 0
View file @ 6762b47a
/* $Linux: hydra.h,v 1.0 1994/10/26 02:03:47 cgd Exp $ */
/*
* Copyright (c) 1994 Timo Rossi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Timo Rossi
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* The Hydra Systems card uses the National Semiconductor
* 8390 NIC (Network Interface Controller) chip, located
* at card base address + 0xffe1. NIC registers are accessible
* only at odd byte addresses, so the register offsets must
* be multiplied by two.
*
* Card address PROM is located at card base + 0xffc0 (even byte addresses)
*
* RAM starts at the card base address, and is 16K or 64K.
* The current Amiga NetBSD hydra driver is hardwired for 16K.
* It seems that the RAM should be accessed as words or longwords only.
*
*/
/* adapted for Linux by Topi Kanerva 03/29/95
with original author's permission */
#define HYDRA_NIC_BASE 0xffe1
/* Page0 registers */
#define NIC_CR 0 /* Command register */
#define NIC_PSTART (1*2) /* Page start (write) */
#define NIC_PSTOP (2*2) /* Page stop (write) */
#define NIC_BNDRY (3*2) /* Boundary pointer */
#define NIC_TSR (4*2) /* Transmit status (read) */
#define NIC_TPSR (4*2) /* Transmit page start (write) */
#define NIC_NCR (5*2) /* Number of collisions, read */
#define NIC_TBCR0 (5*2) /* Transmit byte count low (write) */
#define NIC_FIFO (6*2) /* FIFO reg. (read) */
#define NIC_TBCR1 (6*2) /* Transmit byte count high (write) */
#define NIC_ISR (7*2) /* Interrupt status register */
#define NIC_RBCR0 (0xa*2) /* Remote byte count low (write) */
#define NIC_RBCR1 (0xb*2) /* Remote byte count high (write) */
#define NIC_RSR (0xc*2) /* Receive status (read) */
#define NIC_RCR (0xc*2) /* Receive config (write) */
#define NIC_CNTR0 (0xd*2) /* Frame alignment error count (read) */
#define NIC_TCR (0xd*2) /* Transmit config (write) */
#define NIC_CNTR1 (0xe*2) /* CRC error counter (read) */
#define NIC_DCR (0xe*2) /* Data config (write) */
#define NIC_CNTR2 (0xf*2) /* missed packet counter (read) */
#define NIC_IMR (0xf*2) /* Interrupt mask reg. (write) */
/* Page1 registers */
#define NIC_PAR0 (1*2) /* Physical address */
#define NIC_PAR1 (2*2)
#define NIC_PAR2 (3*2)
#define NIC_PAR3 (4*2)
#define NIC_PAR4 (5*2)
#define NIC_PAR5 (6*2)
#define NIC_CURR (7*2) /* Current RX ring-buffer page */
#define NIC_MAR0 (8*2) /* Multicast address */
#define NIC_MAR1 (9*2)
#define NIC_MAR2 (0xa*2)
#define NIC_MAR3 (0xb*2)
#define NIC_MAR4 (0xc*2)
#define NIC_MAR5 (0xd*2)
#define NIC_MAR6 (0xe*2)
#define NIC_MAR7 (0xf*2)
/* Command register definitions */
#define CR_STOP 0x01 /* Stop -- software reset command */
#define CR_START 0x02 /* Start */
#define CR_TXP 0x04 /* Transmit packet */
#define CR_RD0 0x08 /* Remote DMA cmd */
#define CR_RD1 0x10
#define CR_RD2 0x20
#define CR_NODMA CR_RD2
#define CR_PS0 0x40 /* Page select */
#define CR_PS1 0x80
#define CR_PAGE0 0
#define CR_PAGE1 CR_PS0
#define CR_PAGE2 CR_PS1
/* Interrupt status reg. definitions */
#define ISR_PRX 0x01 /* Packet received without errors */
#define ISR_PTX 0x02 /* Packet transmitted without errors */
#define ISR_RXE 0x04 /* Receive error */
#define ISR_TXE 0x08 /* Transmit error */
#define ISR_OVW 0x10 /* Ring buffer overrun */
#define ISR_CNT 0x20 /* Counter overflow */
#define ISR_RDC 0x40 /* Remote DMA compile */
#define ISR_RST 0x80 /* Reset status */
/* Data config reg. definitions */
#define DCR_WTS 0x01 /* Word transfer select */
#define DCR_BOS 0x02 /* Byte order select */
#define DCR_LAS 0x04 /* Long address select */
#define DCR_LS 0x08 /* Loopback select */
#define DCR_AR 0x10 /* Auto-init remote */
#define DCR_FT0 0x20 /* FIFO threshold select */
#define DCR_FT1 0x40
/* Transmit config reg. definitions */
#define TCR_CRC 0x01 /* Inhibit CRC */
#define TCR_LB0 0x02 /* Loopback control */
#define TCR_LB1 0x04
#define TCR_ATD 0x08 /* Auto transmit disable */
#define TCR_OFST 0x10 /* Collision offset enable */
/* Transmit status reg. definitions */
#define TSR_PTX 0x01 /* Packet transmitted */
#define TSR_COL 0x04 /* Transmit collided */
#define TSR_ABT 0x08 /* Transmit aborted */
#define TSR_CRS 0x10 /* Carrier sense lost */
#define TSR_FU 0x20 /* FIFO underrun */
#define TSR_CDH 0x40 /* CD Heartbeat */
#define TSR_OWC 0x80 /* Out of Window Collision */
/* Receiver config register definitions */
#define RCR_SEP 0x01 /* Save errored packets */
#define RCR_AR 0x02 /* Accept runt packets */
#define RCR_AB 0x04 /* Accept broadcast */
#define RCR_AM 0x08 /* Accept multicast */
#define RCR_PRO 0x10 /* Promiscuous mode */
#define RCR_MON 0x20 /* Monitor mode */
/* Receiver status register definitions */
#define RSR_PRX 0x01 /* Packet received without error */
#define RSR_CRC 0x02 /* CRC error */
#define RSR_FAE 0x04 /* Frame alignment error */
#define RSR_FO 0x08 /* FIFO overrun */
#define RSR_MPA 0x10 /* Missed packet */
#define RSR_PHY 0x20 /* Physical address */
#define RSR_DIS 0x40 /* Received disabled */
#define RSR_DFR 0x80 /* Deferring (jabber) */
/* Hydra System card address PROM offset */
#define HYDRA_ADDRPROM 0xffc0
drivers/net/ixgb/ixgb_main.c
View file @ 2e9f0e18
......@@ -357,18 +357,20 @@ ixgb_probe(struct pci_dev *pdev,
if((err = pci_enable_device(pdev)))
return err;
if(!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
if(!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK)) &&
!(err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))) {
pci_using_dac = 1;
} else {
if((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) {
if((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) ||
(err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK))) {
IXGB_ERR("No usable DMA configuration, aborting\n");
return err;
goto err_dma_mask;
}
pci_using_dac = 0;
}
if((err = pci_request_regions(pdev, ixgb_driver_name)))
return err;
goto err_request_regions;
pci_set_master(pdev);
......@@ -502,6 +504,9 @@ err_ioremap:
free_netdev(netdev);
err_alloc_etherdev:
pci_release_regions(pdev);
err_request_regions:
err_dma_mask:
pci_disable_device(pdev);
return err;
}
......
drivers/net/mv643xx_eth.c
View file @ 2e9f0e18
......@@ -281,10 +281,16 @@ static void mv643xx_eth_tx_timeout_task(struct net_device *dev)
{
struct mv643xx_private *mp = netdev_priv(dev);
netif_device_detach(dev);
if (!netif_running(dev))
return;
netif_stop_queue(dev);
eth_port_reset(mp->port_num);
eth_port_start(dev);
netif_device_attach(dev);
if (mp->tx_ring_size - mp->tx_desc_count >= MAX_DESCS_PER_SKB)
netif_wake_queue(dev);
}
/**
......@@ -552,9 +558,9 @@ static irqreturn_t mv643xx_eth_int_handler(int irq, void *dev_id,
#else
if (eth_int_cause & ETH_INT_CAUSE_RX)
mv643xx_eth_receive_queue(dev, INT_MAX);
#endif
if (eth_int_cause_ext & ETH_INT_CAUSE_TX)
mv643xx_eth_free_completed_tx_descs(dev);
#endif
/*
* If no real interrupt occured, exit.
......@@ -1186,7 +1192,12 @@ static int mv643xx_eth_start_xmit(struct sk_buff *skb, struct net_device *dev)
BUG_ON(netif_queue_stopped(dev));
BUG_ON(skb == NULL);
BUG_ON(mp->tx_ring_size - mp->tx_desc_count < MAX_DESCS_PER_SKB);
if (mp->tx_ring_size - mp->tx_desc_count < MAX_DESCS_PER_SKB) {
printk(KERN_ERR "%s: transmit with queue full\n", dev->name);
netif_stop_queue(dev);
return 1;
}
if (has_tiny_unaligned_frags(skb)) {
if ((skb_linearize(skb, GFP_ATOMIC) != 0)) {
......
drivers/net/natsemi.c
View file @ 2e9f0e18
......@@ -238,7 +238,7 @@ static int full_duplex[MAX_UNITS];
#define NATSEMI_RX_LIMIT 2046 /* maximum supported by hardware */
/* These identify the driver base version and may not be removed. */
static char version[] __devinitdata =
static const char version[] __devinitdata =
KERN_INFO DRV_NAME " dp8381x driver, version "
DRV_VERSION ", " DRV_RELDATE "\n"
KERN_INFO " originally by Donald Becker <becker@scyld.com>\n"
......
drivers/net/pcmcia/axnet_cs.c
View file @ 2e9f0e18
......@@ -1560,7 +1560,7 @@ static void ei_receive(struct net_device *dev)
static void ei_rx_overrun(struct net_device *dev)
{
axnet_dev_t *info = (axnet_dev_t *)dev;
axnet_dev_t *info = PRIV(dev);
long e8390_base = dev->base_addr;
unsigned char was_txing, must_resend = 0;
struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
......
drivers/net/skge.c
View file @ 2e9f0e18
......@@ -78,6 +78,8 @@ static const struct pci_device_id skge_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE) },
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU) },
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T), },
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) },
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b01) },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4320) },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5005) }, /* Belkin */
{ PCI_DEVICE(PCI_VENDOR_ID_CNET, PCI_DEVICE_ID_CNET_GIGACARD) },
......
drivers/net/sky2.c
View file @ 2e9f0e18
......@@ -99,8 +99,6 @@ MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
static const struct pci_device_id sky2_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) },
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b01) },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) },
......@@ -579,8 +577,8 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
reg = gma_read16(hw, port, GM_PHY_ADDR);
gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR);
for (i = 0; i < GM_MIB_CNT_SIZE; i++)
gma_read16(hw, port, GM_MIB_CNT_BASE + 8 * i);
for (i = GM_MIB_CNT_BASE; i <= GM_MIB_CNT_END; i += 4)
gma_read16(hw, port, i);
gma_write16(hw, port, GM_PHY_ADDR, reg);
/* transmit control */
......
drivers/net/sky2.h
View file @ 2e9f0e18
......@@ -1375,7 +1375,7 @@ enum {
GM_PHY_ADDR = 0x0088, /* 16 bit r/w GPHY Address Register */
/* MIB Counters */
GM_MIB_CNT_BASE = 0x0100, /* Base Address of MIB Counters */
GM_MIB_CNT_SIZE = 256,
GM_MIB_CNT_END = 0x025C, /* Last MIB counter */
};
......
drivers/net/starfire.c
View file @ 2e9f0e18
......@@ -335,7 +335,7 @@ do { \
/* These identify the driver base version and may not be removed. */
static char version[] __devinitdata =
static const char version[] __devinitdata =
KERN_INFO "starfire.c:v1.03 7/26/2000 Written by Donald Becker <becker@scyld.com>\n"
KERN_INFO " (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELDATE ")\n";
......
drivers/net/typhoon.c
View file @ 2e9f0e18
......@@ -134,7 +134,7 @@ static const int multicast_filter_limit = 32;
#include "typhoon.h"
#include "typhoon-firmware.h"
static char version[] __devinitdata =
static const char version[] __devinitdata =
"typhoon.c: version " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
MODULE_AUTHOR("David Dillow <dave@thedillows.org>");
......
drivers/net/via-rhine.c
View file @ 2e9f0e18
......@@ -469,7 +469,7 @@ struct rhine_private {
struct sk_buff *tx_skbuff[TX_RING_SIZE];
dma_addr_t tx_skbuff_dma[TX_RING_SIZE];
/* Tx bounce buffers */
/* Tx bounce buffers (Rhine-I only) */
unsigned char *tx_buf[TX_RING_SIZE];
unsigned char *tx_bufs;
dma_addr_t tx_bufs_dma;
......@@ -1043,7 +1043,8 @@ static void alloc_tbufs(struct net_device* dev)
rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC);
next += sizeof(struct tx_desc);
rp->tx_ring[i].next_desc = cpu_to_le32(next);
rp->tx_buf[i] = &rp->tx_bufs[i * PKT_BUF_SZ];
if (rp->quirks & rqRhineI)
rp->tx_buf[i] = &rp->tx_bufs[i * PKT_BUF_SZ];
}
rp->tx_ring[i-1].next_desc = cpu_to_le32(rp->tx_ring_dma);
......@@ -1091,7 +1092,7 @@ static void rhine_check_media(struct net_device *dev, unsigned int init_media)
}
/* Called after status of force_media possibly changed */
void rhine_set_carrier(struct mii_if_info *mii)
static void rhine_set_carrier(struct mii_if_info *mii)
{
if (mii->force_media) {
/* autoneg is off: Link is always assumed to be up */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment