- 24 Apr, 2008 40 commits
-
-
Oliver Endriss authored
Add support for Activy budget card with BSBE1 tuner, subsystem id 0x1131:0x4f60. Low band and DiSEqC support should work now (BSBE1 and BSRU6 tuner). Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Oliver Endriss authored
Fixed some typos. Signed-off-by:
-
Oliver Endriss authored
Add flag to turn off OP0 output. Signed-off-by:
-
Oliver Endriss authored
Reworked the BSBE1 tuner support in bsbe1.h to follow the ALPS-recommended parameters more closely. Tested with BSBE1-based Activy cards and TT DVB-S rev 2.3. Signed-off-by:
-
Andrea Odetti authored
Implementation of DMX_SET_BUFFER_SIZE for dvr. Synchronization of the code of DMX_SET_BUFFER_SIZE for demux and dvr. Signed-off-by:
Andrea Odetti <mariofutire@gmail.com> Signed-off-by:
-
Andrea Odetti authored
This patch fixes the bug in DMX_SET_BUFFER_SIZE for the demux. Basically it resets read and write pointers to 0 in case they are beyond the new size of the buffer. Signed-off-by:
-
Hartmut Hackmann authored
This patch makes the tuner work with transonders providing higher symbol rates. It was contributed by Oliver Endriss. Signed-off-by:
Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by:
-
Hartmut Hackmann authored
This patch replaces the c++ style comments. No functional changes Signed-off-by:
-
Hartmut Hackmann authored
Some DVB-S boards, i.e. with the SD1878 tuner, use a 4 MHz reference frequency. This reqires a different setup of the clock PLL. This patch adds an enum to the tda10086_config struct and sets the proper values for the boards. This patch also fixes the DVB-S section of the MD7134_BRIDGE_2 Signed-off-by:
-
Devin Heitmueller authored
tuner-xc2028.c - Drop the severity level of the xc3028 version reporting, since it's only of interest to developers and user's don't need to have it show up in their dmesg output every time they change the channel. Signed-off-by:
Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by:
-
Devin Heitmueller authored
em28xx-core.c - Drop the severity level of the "urb resubmit failed" to debug, since it occurs every time a stream disconnects, which fills the dmesg log Signed-off-by:
-
Mauro Carvalho Chehab authored
This patch fixes several issues on SCODE: 1) The extracting tool weren't generating the proper tags for SCODE. This has almost no effect, since those tags shouldn't be used; 2) DIBCOM52 were using a wrong IF. It should be 5200, instead of 5700; 3) seek_firmware were wanting an exact match for firmware type. This is wrong. As result, no SCODE firmware were loaded; 4) A few files were including the wrong file for seeking demod firmwares; 5) XC3028_FE_DEFAULT can be used, if user doesn't want to load a firmware. However, this weren't documentated. This feature require more testing. Signed-off-by: -
Andrew Morton authored
Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Steven Toth authored
For boards that require the avcore (cx25840) to be active, ensure it gets loaded. Signed-off-by:
Steven Toth <stoth@hauppauge.com> Signed-off-by:
-
Steven Toth authored
This adds support for DVB-T mode only, analog is not supported. Signed-off-by:
-
Steven Toth authored
cx25840: Ensure GPIO2 is correctly set for cx23885/7/8 based products. Signed-off-by:
-
Steven Toth authored
This adds support for DVB-T mode only, analog mode is not supported. Signed-off-by:
-
Steven Toth authored
Adding support for the NXP TDA10048HN DVB OFDM demodulator Signed-off-by:
-
Steven Toth authored
cx88: enable radio GPIO correctly. Signed-off-by:
-
Kay Sievers authored
The current code creates a bogus DEVPATH: /devices/pci0000:00/0000:00:1d.0/usb1/1-2/video4linux/video0 while it should be: /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/video4linux/video0 Signed-off-by:
Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Steven Toth authored
au0828: Typo Signed-off-by:
-
Steven Toth authored
au0828: Add HVR850 model number Signed-off-by:
-
Steven Toth authored
au8522: Cleanup Signed-off-by:
-
Steven Toth authored
au0828: Cleanup Signed-off-by:
-
Michael Krufky authored
consolidate au8522_qam256_mse2snr_lookup, au8522_qam64_mse2snr_lookup and au8522_vsb_mse2snr_lookup into a single function, au8522_mse2snr_lookup. Pass the mse2snr table into au8522_mse2snr_lookup depending on the modulation type. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Steven Toth authored
au8522: Added SNR support and basic cleanup Signed-off-by:
-
Michael Krufky authored
add function au8522_read_mse, which will be used to compute snr TO DO: mse2snr Signed-off-by:
-
Michael Krufky authored
ucblocks are reported in separate registers for vsb & qam Signed-off-by:
-
Michael Krufky authored
replace __FUNCTION__ with __func__ and clean associated checkpatch.pl warnings. Signed-off-by:
-
Michael Krufky authored
Fixed some checkpatch.pl warnings Signed-off-by:
-
Michael Krufky authored
replace __FUNCTION__ with __func__ and clean associated checkpatch.pl warnings. Signed-off-by:
-
Michael Krufky authored
VIDEO_AU0828 should select DVB_AU8522 and DVB_TUNER_XC5000 if !DVB_FE_CUSTOMIZE Signed-off-by:
-
Steven Toth authored
Signed-off-by:
-
Steven Toth authored
Avoid an oops if the board is not fully defined. Signed-off-by:
-
Steven Toth authored
Scripts to maintain the CARDLIST file. Signed-off-by:
-
Steven Toth authored
HVR950Q Hauppauge eeprom support. Signed-off-by:
-
Steven Toth authored
Including support for the AU0828 USB Bridge. Including support for the AU8522 ATSC/QAM Demodulator. Including support for the AU8522 ATSC/QAM Demodulator. Signed-off-by:
-
Steven Toth authored
Adding support for a new i2c bridge type Signed-off-by:
-
