Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

The skb data allocated for packet data received is 4 byte aligned.

Unfortunately, this causes non-32bit aligned accesses in IP stack because
the MAC header is non-word aligned (14 bytes).

The result can be observed by looking at /proc/cpu/alignment while the
device is over network.

Doing an skb_reserve(NET_IP_ALIGN) as other driver do fixed the issue.

A quick performance test over lab network using iperf on DM6446 EVM showed
an increase in bandwidth from 60Mbits/s to 70Mbits/s.
Signed-off-by: Steve Chen <schen@mvista.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

The provision for extra bytes in each rx buffer was meant for allocators
who cannot guarantee cacheline aligned buffer allocation.

cacheline aligned allocation is guaranteed by alloc_skb so this provision is
not required.

This should save 32*128 = 4k of space.

Tested on DM6446 EVM using NFS root, iperf (TCP) and tftp of a gigabyte of data.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Before this, if a "noevent" channel was in use, the code
would go into an infinite loop.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Fix the definitions of at24_setup() in two davinci board files
that are incorrect.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

From: David Brownell <dbrownell@users.sourceforge.net>

 - Define new setup() hook to export the accessor
 - Implement accessor methods

Moves some error checking out of the sysfs interface code
into the layer below it, which is now shared by both sysfs
and memory access code.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

In the case of at24, the platform code registers a 'setup' callback
with the at24_platform_data.  When the at24 driver detects an EEPROM,
it fills out the read and write functions of the memory_accessor and
calls the setup callback passing the memory_accessor struct.  The
platform code can then use the read/write functions in the
memory_accessor struct for reading and writing the EEPROM.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

This patch adds an interface by which other kernel code can read/write
persistent memory such as I2C or SPI EEPROMs, or devices which provide
NVRAM.  Use cases include storage of board-specific configuration data
like Ethernet addresses and sensor calibrations.

Original idea, review and improvement suggestions by David Brownell.
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Clear any set bits in the 'NEXT' field of the MDCTL register in the
Power and Sleep Controller (PSC) before setting any new bits.
This also allows some minor cleanup by removing some no longer
needed lines of code.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>

CONFIG_CPU_V5 not used anywhere so remove it.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

According the to GAS manual, the ARM 'adr' instruction can only
reference symbols that are in the same section as the code.
Unfortunately, there was a bug in GAS that didn't flag that as
an error and simply used the address of the 'adr' instruction
itself instead of the symbol.  That bug has been reported and
fixed upstream.

Now that GAS is fixed, the code needs to be fixed by keeping
__davinci_start() and davinci_machine_no in the same section.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

The DaVinci SoCs have 3 uarts so enable all three by setting
CONFIG_SERIAL_8250_NR_UARTS and CONFIG_SERIAL_8250_RUNTIME_UARTS
to 3.

The other changes to the defconfig file are artifacts of running
the old defconfig through 'make config'.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

The dm355 leopard board is meant to be a low-cost IP netcam. It has
ethernet, USB OTG and SD support, as well as the ability to use
different sensor boards.
It is being promoted as "beagle buddy" to be used as a companion to the
OMAP3 beagleboard.
Signed-off-by: Koen Kooi <koen@beagleboard.org>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Clock and Pin Mux definitions for video on DM646x SoC

Add clock defintions and pin mux definitions for Video Port Interface(VPIF).
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Since duplex is u32, use ~0 instead of -1 for clarity.
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

The duplex bit in MACCONTROL wasn't changed.
Signed-off-by: Troy Kisky <Troy.Kisky@boundarydevices.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

A pointer was being passed as an argument to sizeof instead
of the variable.

No need to send this patch to ALSA list as this fix is already present in that
tree.
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Fixes the PIO mode for MMC/SD on TI's DA830/OMAP-L137 architecture.

On TI's DA830/OMAP-L137, the DMATRIG bit should be set for PIO
transfers.  If MMC is being used for both PIO and EDMA based
transfers, then it is likely that, an extra MMC EVENT is latched
in the EDMA Event register even when just the CPU and MMC are in
play. To properly switch from PIO to EDMA, clear any extra or
unexpected event latched in the Event register, by doing a write
to the corresponding bits in the ECR register.
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>

Adds edma_clear_event API support to EDMA.

There has been a change to the MMC interface on TI's DA830/OMAP-L137
architecture that requires setting the DMATRIG bit to trigger
the first read data transfer when doing a read operation using
the CPU, but it has the unintended consequence causing a DMA
event.  Because of this, the next DMA read from the MMC/SD will
fail with an Event Miss. This API will be used to clear the ER.
Signed-off-by: David Griego <dgriego@mvista.com>
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

This bug occurs when the davinci serial code tries to register UART(X) when
UART(X-1) or UART(X-2) is not enabled in the structure uart_config of the board
setup code:

This works: .enabled_uarts = (1 << 0)
This works: .enabled_uarts = (1 << 0) | (1 << 1)
This works: .enabled_uarts = (1 << 0) | (1 << 1) | | (1 << 2)
This fails: .enabled_uarts = (1 << 1)
This fails: .enabled_uarts = (1 << 1) | (1 << 2)
This fails: .enabled_uarts = (1 << 0) | (1 << 2)

The bug is triggered by the fact that the 8250 serial driver stops parsing the
serial_platform_data structure as soon as it sees a zero flags entry. Thus the
davinci serial registration code (serial.c) must <pack> the serial_platform_data
structure and only clear the flags entry when there is no more devices following.

Tested on DM6446 and DM355 custom boards.
Signed-off-by: Hugo Villeneuve <hugo@hugovil.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Add support for Texas Instuments Common Platform Interrupt Controller
(cp_intc) used on DA830/OMAP-L137.
Signed-off-by: Steve Chen <schen@mvista.com>
Signed-off-by: Mark Greer <mgreer@mvista.com>
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

With a sufficiently new compiler and binutils, code which wasn't
previously generating .eh_frame sections has begun to.  Certain
architectures (powerpc, in this case) may generate unexpected relocation
formats in response to this, preventing modules from loading.

While the new relocation types should probably be handled, revert to the
previous behaviour with regards to generation of .eh_frame sections.

(This was reported against Fedora, which appears to be the only distro
doing any building against gcc-4.4 at present: RH bz#486545.)
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Alexandre Oliva <aoliva@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert the change to the orphan dates of Windows 95, DOS, compression.
Add a new orphan date for OS/2.
Signed-off-by: Jody McIntyre <scjody@sun.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits)
  ucc_geth: Fix oops when using fixed-link support
  dm9000: locking bugfix
  net: update dnet.c for bus_id removal
  dnet: DNET should depend on HAS_IOMEM
  dca: add missing copyright/license headers
  nl80211: Check that function pointer != NULL before using it
  sungem: missing net_device_ops
  be2net: fix to restore vlan ids into BE2 during a IF DOWN->UP cycle
  be2net: replenish when posting to rx-queue is starved in out of mem conditions
  bas_gigaset: correctly allocate USB interrupt transfer buffer
  smsc911x: reset last known duplex and carrier on open
  sh_eth: Fix mistake of the address of SH7763
  sh_eth: Change handling of IRQ
  netns: oops in ip[6]_frag_reasm incrementing stats
  net: kfree(napi->skb) => kfree_skb
  net: fix sctp breakage
  ipv6: fix display of local and remote sit endpoints
  net: Document /proc/sys/net/core/netdev_budget
  tulip: fix crash on iface up with shirq debug
  virtio_net: Make virtio_net support carrier detection
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Fix crash with /proc/iomem
  sparc64: Reschedule KGDB capture to a software interrupt.
  sbus: Auto-load openprom module when device opened.

This patch fixes bug #12208:

  Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=12208
  Subject         : uml is very slow on 2.6.28 host

This turned out to be not a scheduler regression, but an already
existing problem in ptrace being triggered by subtle scheduler
changes.

The problem is this:

 - task A is ptracing task B
 - task B stops on a trace event
 - task A is woken up and preempts task B
 - task A calls ptrace on task B, which does ptrace_check_attach()
 - this calls wait_task_inactive(), which sees that task B is still on the runq
 - task A goes to sleep for a jiffy
 - ...

Since UML does lots of the above sequences, those jiffies quickly add
up to make it slow as hell.

This patch solves this by not rescheduling in read_unlock() after
ptrace_stop() has woken up the tracer.

Thanks to Oleg Nesterov and Ingo Molnar for the feedback.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc:
  powerpc/mm: Fix Respect _PAGE_COHERENT on classic ppc32 SW TLB load machines

Grant picked up the wrong version of "Respect _PAGE_COHERENT on classic
ppc32 SW" (commit a4bd6a93)

It was missing the code to actually deal with the fixup of
_PAGE_COHERENT based on the CPU feature.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

commit b1c4a9dd ("ucc_geth: Change
uec phy id to the same format as gianfar's") introduced a regression
in the ucc_geth driver that causes this oops when fixed-link is used:

Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc0151270
Oops: Kernel access of bad area, sig: 11 [#1]
TMCUTU
NIP: c0151270 LR: c0151270 CTR: c0017760
REGS: cf81fa60 TRAP: 0300   Not tainted  (2.6.29-rc8)
MSR: 00009032 <EE,ME,IR,DR>  CR: 24024042  XER: 20000000
DAR: 00000000, DSISR: 20000000
TASK = cf81cba0[1] 'swapper' THREAD: cf81e000
GPR00: c0151270 cf81fb10 cf81cba0 00000000 c0272e20 c025f354 00001e80
cf86b08c
GPR08: d1068200 cffffb74 06000000 d106c200 42024042 10085148 0fffd000
0ffc81a0
GPR16: 00000001 00000001 00000000 007ffeb0 00000000 0000c000 cf83f36c
cf83f000
GPR24: 00000030 cf83f360 cf81fb20 00000000 d106c200 20000000 00001e80
cf83f360
NIP [c0151270] ucc_geth_open+0x330/0x1efc
LR [c0151270] ucc_geth_open+0x330/0x1efc
Call Trace:
[cf81fb10] [c0151270] ucc_geth_open+0x330/0x1efc (unreliable)
[cf81fba0] [c0187638] dev_open+0xbc/0x12c
[cf81fbc0] [c0187e38] dev_change_flags+0x8c/0x1b0

This patch fixes the issue by removing offending (and somewhat
duplicate) code from init_phy() routine, and changes _probe()
function to use uec_mdio_bus_name().

Also, since we fully construct phy_bus_id in the _probe() routine,
we no longer need ->phy_address and ->mdio_bus fields in
ucc_geth_info structure.

I wish the patch would be a bit shorter, but it seems like the only
way to fix the issue in a sane way. Luckily, the patch has been
tested with real PHYs and fixed-link, so no further regressions
expected.
Reported-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Tested-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes a locking bug in the dm9000 driver.  It calls
request_irq() without setting IRQF_DISABLED ... which is
correct for handlers that support IRQ sharing, since that
behavior is not guaranteed for shared IRQs.  However, its
IRQ handler then wrongly assumes that IRQs are blocked.
So the fix just uses the right spinlock primitives in the
IRQ handler.

NOTE:  this is a classic example of the type of bug which
lockdep currently masks by forcibly setting IRQF_DISABLED
on IRQ handlers that did not request that flag.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kconfig: improve seed in randconfig
  kconfig: fix randconfig for choice blocks

* 'fix-includes' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: merge the non-MMU and MMU versions of siginfo.h
  m68k: use the MMU version of unistd.h for all m68k platforms
  m68k: merge the non-MMU and MMU versions of signal.h
  m68k: merge the non-MMU and MMU versions of ptrace.h
  m68k: use MMU version of setup.h for both MMU and non-MMU
  m68k: merge the non-MMU and MMU versions of sigcontext.h
  m68k: merge the non-MMU and MMU versions of swab.h
  m68k: merge the non-MMU and MMU versions of param.h

Update all previous incarnations of my email address to the correct one.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If ecryptfs_encrypted_view or ecryptfs_xattr_metadata were being
specified as mount options, a NULL pointer dereference of crypt_stat
was possible during lookup.

This patch moves the crypt_stat assignment into
ecryptfs_lookup_and_interpose_lower(), ensuring that crypt_stat
will not be NULL before we attempt to dereference it.

Thanks to Dan Carpenter and his static analysis tool, smatch, for
finding this bug.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Acked-by: Dustin Kirkland <kirkland@canonical.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>