Commit a98f8fd2 (x86: apic reset
counter on shutdown) set the counter to max to avoid spurious
interrupts when the timer is re-enabled.

(In theory) you'll still get a spurious interrupt if spending
more than 344 seconds with this interrupt disabled and then
unmasking it.

The right thing to do is to clear the register. This disables
the interrupt from happening (at least it does on AMD hardware).
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20091027100138.GB30802@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

As only apic noop is used we allow to use almost any operation
caller wants (and which of them noop driver supports of
course).

Initially it was reported by Ingo Molnar that apic noop
issue a warning for pkg id (which is actually false positive
and should be eliminated).

So we save checking (and warning issue) for read/write
operations while allow any other ops to be freely used.

Also:
 - fix noop_cpu_to_logical_apicid, it should be 0.
 - rename noop_default_phys_pkg_id to noop_phys_pkg_id
   (we use default_ prefix for more general routines
    in apic subsystem).
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
LKML-Reference: <20091015150416.GC5331@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: yinghai@kernel.org
Cc: macro@linux-mips.org
LKML-Reference: <20091014150904.GA5259@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

This warning:

 In file included from arch/x86/include/asm/ipi.h:23,
                  from arch/x86/kernel/apic/apic_noop.c:27:
 arch/x86/include/asm/hw_irq.h:105: warning: ‘struct irq_desc’ declared inside parameter list
 arch/x86/include/asm/hw_irq.h:105: warning: its scope is only this definition or declaration, which is probably not what you want

triggers because irq_desc is defined after hw_irq.h is included
in irq.h. Since it's pointer reference only, a forward declaration
of the type will solve the problem.

LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Move UV specific functionality out of the generic IO-APIC code.
Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
LKML-Reference: <20091013203236.GD20543@sgi.com>
[ Cleaned up the code some more in their new places. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>

This patch fixes handling of uv hub irq affinity.  IRQs with ALL or
NODE affinity can be routed to cpus other than their originally
assigned cpu.  Those with CPU affinity cannot be rerouted.
Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
LKML-Reference: <20090930160259.GA7822@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

In case if a system has a large number of cpus printing apics
contents may consume a long time period.

We limit such an output by 1 apic by default. But to have an
ability to see all apics or some part of them we introduce
"show_lapic" setup option which allow us to limit/unlimit the
number of APICs being dumped.

Example: apic=debug show_lapic=5, or apic=debug show_lapic=all

Also move apic_verbosity checking upper that way so helper routines
do not need to inspect it at all.
Suggested-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: yinghai@kernel.org
Cc: macro@linux-mips.org
LKML-Reference: <20091013201022.926793122@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

In case if apic were disabled we may use the whole apic NOOP driver
instead of sparse poking the some functions in apic driver.

Also NOOP would catch any inappropriate apic operation calls (not
just read/write).
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: yinghai@kernel.org
Cc: macro@linux-mips.org
LKML-Reference: <20091013201022.747817361@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Introduce NOOP APIC driver. We should use it in case if apic was
disabled due to hardware of software/firmware problems (including
user requested to disable it case).

The driver is attempting to catch any inappropriate apic operation
call with warning issue.

Also it is possible to use some apic operation like IPI calls,
read/write without checking for apic presence which should make
callers code easier.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: yinghai@kernel.org
Cc: macro@linux-mips.org
LKML-Reference: <20091013201022.534682104@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cciss: Add cciss_allow_hpsa module parameter
  cciss: Fix multiple calls to pci_release_regions
  blk-settings: fix function parameter kernel-doc notation
  writeback: kill space in debugfs item name
  writeback: account IO throttling wait as iowait
  elv_iosched_store(): fix strstrip() misuse
  cfq-iosched: avoid probable slice overrun when idling
  cfq-iosched: apply bool value where we return 0/1
  cfq-iosched: fix think time allowed for seekers
  cfq-iosched: fix the slice residual sign
  cfq-iosched: abstract out the 'may this cfqq dispatch' logic
  block: use proper BLK_RW_ASYNC in blk_queue_start_tag()
  block: Seperate read and write statistics of in_flight requests v2
  block: get rid of kblock_schedule_delayed_work()
  cfq-iosched: fix possible problem with jiffies wraparound
  cfq-iosched: fix issue with rq-rq merging and fifo list ordering

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: fix compile warnings

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kbuild: revert "save ARCH & CROSS_COMPILE ..."
  warn about use of uninstalled kernel headers
  kbuild: mkcompile_h: trivial cleanups
  kbuild: fix warning when domainname is not available
  kbuild: Fix size_append issue for bzip2/lzma kernel
  kbuild,scripts: use non-builtin echo for '-e'
  kbuild: fix the binrpm-pkg target to work with KBUILD_OUTPUT set

Commit d43c36dc ("headers: remove
sched.h from interrupt.h") left some build errors in some configurations
due to drivers having depended on getting header files "accidentally".
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[ Combined several one-liners from Ingo into one single patch  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: fix possible deadlock in hidraw_read
  HID: fix kerneldoc comment for hid_input_report()
  HID: add __init/__exit macros to twinhan.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Allow all formats as default for Nvidia HDMI
  ALSA: aaci: ARM1176 aaci-pl041 AC97 register read timeout
  ALSA: hda - Fix volume-knob setup for Dell laptops with STAC9228
  ALSA: hda - Fix mute sound with STAC9227/9228 codecs
  ALSA: bt87x - Add a whitelist for Pinnacle PCTV (11bd:0012)
  ALSA: hda - Fix overflow of spec->init_verbs in patch_realtek.c
  ALSA: ice1724 - Make call to set hw params succeed on ESI Juli@
  ALSA: ice1724: Fix surround on Chaintech AV-710
  ALSA: hda - Add full rates/formats support for Nvidia HDMI

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  ext3: Update documentation about ext3 quota mount options
  ext3: Don't update superblock write time when filesystem is read-only

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Fix twl4030 boot with twl4030 usb transceiver enabled

* git://git.infradead.org/~dwmw2/iommu-2.6.32:
  x86: Move pci_iommu_init to rootfs_initcall()
  Run pci_apply_final_quirks() sooner.
  Mark pci_apply_final_quirks() __init rather than __devinit
  Rename pci_init() to pci_apply_final_quirks(), move it to quirks.c
  intel-iommu: Yet another BIOS workaround: Isoch DMAR unit with no TLB space
  intel-iommu: Decode (and ignore) RHSA entries
  intel-iommu: Make "Unknown DMAR structure" message more informative

In the commit f0613d57
    ALSA: hda - Add full rates/formats support for Nvidia HDMI
the flag LIMITIED_RATE_FMT_SUPPORT was set as default, as I forgot
to clear before commit.

Let's enable all formats/rates as default.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

After a reboot on an ARM1176 which amounts to a softreset, it has been
noted that the ALSA driver does not get registered and the probe fails
with the error "aaci-pl041 fpga:04: ac97 read back fail". In the process
of reading from a register the SL1TxBusy bit is set indicating that the
transceiver is busy and remains so until the default timeout occurs.
Set the Power down register 0x26 to an arbitrary value as specified in
the PL041 manual (page: 3-18) so that AACISL1TX/AACISL2TX registers take
their default state.
Signed-off-by: Philby John <pjohn@in.mvista.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The volume-knob widget needs to be set with 0x7f instead of 0xff
for Dell laptops with STAC9228 codec, too, like the previous commit.

Reference: Novell bnc#545013
	http://bugzilla.novell.com/show_bug.cgi?id=545013Signed-off-by: Takashi Iwai <tiwai@suse.de>

On FSC laptops, the sound gets muted gradually when the volume is chnaged.
This is due to the wrong volume-knob widget setup.  The delta bit (bit 7)
shouldn't be set for these devices.

This patch adds a new quirk to set the value 0x7f to the widget 0x24
instead of 0xff.

Reference: Novell bnc#546006
	http://bugzilla.novell.com/show_bug.cgi?id=546006Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add cciss_allow_hpsa module parameter.  This parameter causes
the cciss driver to ignore any Smart Array devices known to be
supported by the hpsa driver.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Fix multiple calls to pci_release_regions.  If cciss_pci_init
fails, it already does any necessary call to pci_release_regions,
so this does not need to be done again in cciss_init_one in that
case.
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

ALC861-VD lenovo model causes overflow of spec->init_verbs entries due to
the recent changes.  Simply increase the array size to avoid the overflow.
Reported-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Jan Kara <jack@suse.cz>

This avoids updating the superblock write time when we are mounting
the root file system read/only but we need to replay the journal; at
that point, for people who are east of GMT and who make their clock
tick in localtime for Windows bug-for-bug compatibility, and this will
cause e2fsck to complain and force a full file system check.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: Prevent AER driver from being loaded on non-root port PCIE devices
  PCI: get larger bridge ranges when space is available
  PCI: pci.c: fix kernel-doc notation
  PCI quirk: TI XIO200a erroneously reports support for fast b2b transfers
  PCI PM: Read device power state from register after updating it
  PCI: remove pci_assign_resource_fixed()
  PCI: PCIe portdrv: remove "-driver" from driver name

* master.kernel.org:/home/rmk/linux-2.6-arm: (24 commits)
  ARM: force dcache flush if dcache_dirty bit set
  [ARM] pxa: workaround errata #37 by not using half turbo switching
  [ARM] pxamci: fix printing gpio numbers in pxamci_probe
  [ARM] pxa/csb726: adjust duplicate structure field initialization
  ARM: Add kmap_atomic type debugging
  ARM: boolean bit testing
  ARM: update die() output
  ARM: Dump code/mem oops lines with the appropriate log level
  ARM: Dump memory and backtrace as one printk per line
  ARM: 5756/1: ep93xx: introduce clk parent
  ARM: 5754/1: ep93xx: update i2c support
  ARM: 5753/1: ep93xx: remove old EP93XX_GPIO_* defines
  ARM: 5729/1: ep93xx: define EP93XX_*_PHYS_BASE with macros
  ARM: 5751/1: ep93xx/micro9: Add Micro9-Slim
  ARM: 5750/1: ep93xx/micro9: Update platform code
  ARM: 5749/1: ep93xx/micro9: Update maintainer
  ARM: 5752/1: SA1100: fix building of h3100
  ARM: 5748/1: bcmring: fix build warning messages
  ARM: 5747/1: Fix the start_pg value in free_memmap()
  ARM: 5746/1: Handle possible translation errors in ARMv6/v7 coherent_user_range
  ...

The MUSB code relies on platform implementations that currently only
exists for Arm and Blackfin processors, so have the MUSB Kconfig depend
upon those arches.

This should prevent other arches from building MUSB via randconfig.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

struct sockaddr_storage * can safely be used as struct sockaddr *.
Suppress an "incompatible pointer type" warning.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 46d57a44 ("serial: use tty_port pointers in the core code")
contained two bugs that causes (rare) crashes:

 - the rename typoed one site

 - a NULL check was missed
Reported-and-tested-by: Ingo Molnar <mingo@elte.hu>
Cc: Greg KH <gregkh@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

On ARM, update_mmu_cache() does dcache flush for a page only if
it has a kernel mapping (page_mapping(page) != NULL). The correct
behavior would be to force the flush based on dcache_dirty bit only.

One of the cases where present logic would be a problem is when
a RAM based block device[1] is used as a swap disk. In this case,
we would have in-memory data corruption as shown in steps below:

do_swap_page()
{
    - Allocate a new page (if not already in swap cache)
    - Issue read from swap disk
        - Block driver issues flush_dcache_page()
        - flush_dcache_page() simply sets PG_dcache_dirty bit and does not
          actually issue a flush since this page has no user space mapping yet.
    - Now, if swap disk is almost full, this newly read page is removed
      from swap cache and corrsponding swap slot is freed.
    - Map this page anonymously in user space.
    - update_mmu_cache()
        - Since this page does not have kernel mapping (its not in page/swap
          cache and is mapped anonymously), it does not issue dcache flush
          even if dcache_dirty bit is set by flush_dcache_page() above.

    <user now gets stale data since dcache was never flushed>
}

Same problem exists on mips too.

[1] example:
 - brd (RAM based block device)
 - ramzswap (RAM based compressed swap device)
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

We want this to happen after the PCI quirks, which are now running at
the very end of the fs_initcalls.

This works around the BIOS problems which were originally addressed by
commit db8be50c ('USB: Work around BIOS
bugs by quiescing USB controllers earlier'), which was reverted in
commit d93a8f82.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Having this as a device_initcall() means that some real device drivers
can actually initialise _before_ the quirks are run, which is wrong.

We want it to run _before_ device_initcall(), but _after_ fs_initcall(),
since some arch-specific PCI initialisation like pcibios_assign_resources()
is done at fs_initcall().

We could use rootfs_initcall() but I actually want to use that for the
IOMMU initialisation, which has to come after the quirks, but still
before the real devices. So use fs_initcall_sync() instead -- since this
is entirely synchronous, it doesn't hurt that it'll escape the
synchronisation.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

It doesn't get invoked on hotplug; it can be thrown away after init.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

This function may have done more in the past, but all it does now is
apply the PCI_FIXUP_FINAL quirks. So name it sensibly and put it where
it belongs.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>