- 27 Apr, 2007 40 commits
-
-
S.Caglar Onur authored
Remove duplicate define of OHCI_QUIRK_ZFMICRO from ftdi-elan.c, its already defined in drivers/ush/host/ohci.c Signed-off-by:
"S.Caglar Onur" <caglar@pardus.org.tr> Cc: <tony.olech@elandigitalsystems.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Leon Leong authored
Add the detection for the BandRich BandLuxe C100/C100S/C120 HSDPA Data Card. With the vendor and product IDs are set properly, the data card can be detected and works fine. Signed-off-by:
Leon Leong <upleong@bandrich.com> Signed-off-by:
-
Wu, Bryan authored
skb_push function may return a pointer which is not aligned as required by struct rndis_packet_msg_type. Using attribute trick to fix this bug. Signed-off-by:
Roy Huang <roy.huang@analog.com> Signed-off-by:
Jie Zhang <jie.zhang@analog.com> Signed-off-by:
Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Cyrill Gorcunov authored
Add checking of driver registration status and release allocated resources if it failed. Signed-off-by:
Cyrill Gorcunov <gorcunov@gmail.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: "Luiz Fernando N. Capitulino" <lcapitulino@mandriva.com.br> Signed-off-by:
-
Greg Kroah-Hartman authored
This should help with any potential NULL pointer usages as reported by a few users. Signed-off-by: -
David Brownell authored
Use the new ohci-pci quirk infrastructure to address the problem it was created to address: a quirk specific to the Portege 4000, in buzilla as http://bugzilla.kernel.org/show_bug.cgi?id=6723 Also fix a misuse of "__devinit" for the quirk functions. It must not be used without first ensuring that the references from the quirk tables are gone, and that the function using those quirk tables is also gone. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
David Brownell authored
Update "usbnet" so that ethtool reports the name of the minidriver in use (e.g. asix, cdc_ether, dm9601, rndis_host) instead of "usbnet". This is a better match to how other network drivers work, resolving a minor open issue. Signed-off-by:
-
David Brownell authored
Cleanups to the rndis_host code, and a tweak that helps talking to PXA hardware. Mostly from Ole André Vadla Ravnås <oleavr@gmail.com> - Prevent SET_INTERFACE requests, they give PXA hardware bad indigestion - For paranoia, null a pointer after freeing its data - Wrap up ActiveSync oddities for RNDIS_QUERY in one routine - Use that wrapper when getting the Ethernet address - Whitespace fixes Plus add a comment noting the open issues about some RNDIS clients still needing TBD kinds of browbeating to accept non-jumbogram packets. Signed-off-by:
-
David Brownell authored
Minor doc update to <linux/usb/ch9.h> ... say where USB_DT_CS_* came from and update the definitions to match how they're derived there. Signed-off-by:
-
Alan Stern authored
This patch (as897) changes the autosuspend timer code to use the standard types and macros in dealing with jiffies values. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Pete Zaitcev authored
Add the "bus zero" feature to the usbmon. If a user process specifies bus with number zero, it receives events from all buses. This is useful when we wish to see initial enumeration when a bus is created, typically after a modprobe. Until now, an application had to loop until a new bus could be open, then start capturing on it. This procedure was cumbersome and could lose initial events. Also, often it's too bothersome to find exactly to which bus a specific device is attached. Paolo Albeni provided the original concept implementation. I added the handling of "bus->monitored" flag and generally fixed it up. Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
Tony Lindgren authored
Some host controller drivers may need a PIO fallback when a DMA channel is temporarily unavailable. This patch provides an address that such drivers can use for PIO in those cases, and nulls that field out when no such address is available (highmem) which should help usbmon. Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Oliver Neukum authored
this driver does - ignore errors during open - submit a running urb - use down_interruptible not handling signals - GFP_KERNEL with a spinlock held Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Alan Stern authored
This patch (as877) adds a "last_busy" field to struct usb_device, for use by the autosuspend framework. Now if an autosuspend call comes at a time when the device isn't busy but hasn't yet been idle for long enough, the timer can be set to exactly the desired value. And we will be ready to handle things like HID drivers, which can't maintain a useful usage count and must rely on the time-of-last-use to decide when to autosuspend. The patch also makes some related minor improvements: Move the calls to the autosuspend condition-checking routine into usb_suspend_both(), which is the only place where it really matters. If the autosuspend timer is already running, don't stop and restart it. Replace immediate returns with gotos so that the optional debugging ouput won't be bypassed. If autoresume is disabled but the device is already awake, don't return an error for an autoresume call. Don't try to autoresume a device if it isn't suspended. (Yes, this undercuts the previous change -- so sue me.) Don't duplicate existing code in the autosuspend work routine. Fix the kerneldoc in usb_autopm_put_interface(): If an autoresume call fails, the usage counter is left unchanged. Signed-off-by:
-
Richard Knutsson authored
Signed-off-by:
Richard Knutsson <ricknu-0@student.ltu.se> Acked-by:
Stuart MacDonald <stuartm@connecttech.com> Signed-off-by:
-
Oliver Neukum authored
omninet kills all URBs in close. However write() returns as soon as the URB has been submitted. Killing the last URB means a race that can lose that date written in the last call to write(). As a fix this is moved to shutdown(). Signed-off-by:
-
Oliver Neukum authored
we report errors to the caller. THis patch adds error handling to the driver. Signed-off-by:
-
Oliver Neukum authored
- report errors - cleanup in error case - use of endianness macros Signed-off-by:
-
Oliver Neukum authored
this driver ignores errors while starting the transmit queue. It will never be reported stopped as the completion handler won't run and it will never be started again as it will be considered started. This patch adds error handling. Signed-off-by:
-
Oliver Neukum authored
this driver sets intfdata to NULL while it still can be read and happily followed. Signed-off-by:
-
Oliver Neukum authored
this driver has a memory leak in an error case. Signed-off-by:
-
Jelle Foks authored
This patch adds the USB ID of the ADS Tech USBX-707 USB IR blaster (that comes with the ADS Tech PTV-305 grabber card), which has a ftdi232bm inside hooked up to a pic. With this it should be fairly straightforward to make at least lirc receiving work with this device. I will submit a patch to lirc for that as soon as I have one ready, I'm getting data with minicom with this patch, but need to figure out some more details such as best/correct baudrate. Signed-off-by:
Jelle Foks <jelle@foks.8m.com> Signed-off-by:
-
Oliver Neukum authored
this has the same race as the visor driver. The counter must be incremented under the lock it is checked under. Signed-off-by:
-
Oliver Neukum authored
this fixes a small race in visor_write. Signed-off-by:
-
Oliver Neukum authored
- proper endianness macros - scheduling in interrupt in error case Signed-off-by:
Naranjo Manuel Francisco <naranjo.manuel@gmail.com>
-
Kay Sievers authored
o The "real" usb-devices export now a device node which can populate /dev/bus/usb. o The usb_device class is optional now and can be disabled in the kernel config. Major/minor of the "real" devices and class devices are the same. o The environment of the usb-device event contains DEVNUM and BUSNUM to help udev and get rid of the ugly udev rule we need for the class devices. o The usb-devices and usb-interfaces share the same bus, so I used the new "struct device_type" to let these devices identify themselves. This also removes the current logic of using a magic platform-pointer. The name of the device_type is also added to the environment which makes it easier to distinguish the different kinds of devices on the same subsystem. It looks like this: add@/devices/pci0000:00/0000:00:1d.1/usb2/2-1 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-1 SUBSYSTEM=usb SEQNUM=1533 MAJOR=189 MINOR=131 DEVTYPE=usb_device PRODUCT=46d/c03e/2000 TYPE=0/0/0 BUSNUM=002 DEVNUM=004 This udev rule works as a replacement for usb_device class devices: SUBSYSTEM=="usb", ACTION=="add", ENV{DEVTYPE}=="usb_device", \ NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0644" Updated patch, which needs the device_type patches in Greg's tree. I also got a bugzilla assigned for this. :) https://bugzilla.novell.com/show_bug.cgi?id=250659Signed-off-by:Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
-
Randy Dunlap authored
With CONFIG_BLOCK=n, this build error happens: WARNING: "bdev_read_only" [drivers/usb/gadget/g_file_storage.ko] undefined! Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
-
Alan Stern authored
This patch (as874) adds another piece to the user-visible part of the USB autosuspend interface. The new power/level sysfs attribute allows users to force the device on (with autosuspend off), force the device to sleep (with autoresume off), or return to normal automatic operation. Signed-off-by:
-
Peter Stokes authored
Add logical channel support for ATI Remote Wonder II The ATI Remote Wonder II can be configured with one of 16 unique logical channels. Allowing up to 16 remotes to be used independently within range of each other. This change adds functionality to configure the receiver and filter the input data to respond or exclude remotes configured with different logical channels. Signed-off-by:
Peter Stokes <linux@dadeos.freeserve.co.uk> Acked-by:
Ville Syrjala <syrjala@sci.fi> Signed-off-by:
-
Oliver Neukum authored
the sierra driver does not directly use usb_kill_urb(). It uses a wrapper. This wrapper means that callbacks which are running are not killed during close, resubmitting and illicitly pushing data into the tty layer. The whole purpose of usb_kill_urb() is subverted. The wrapper must be removed. The same problem as the option driver. Signed-off-by:
-
Oliver Neukum authored
the option driver does not directly use usb_kill_urb(). It uses a wrapper. This wrapper means that callbacks which are running are not killed during close, resubmitting and illicitly pushing data into the tty layer. The whole purpose of usb_kill_urb() is subverted. The wrapper must be removed. Signed-off-by:
Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by:
-
Oliver Neukum authored
memory allocated must be freed in the error case. Signed-off-by:
-
Alan Stern authored
This patch (as872) adds some WARN_ON()s to various error checks which are never supposed to fail. Unsettlingly, one of them has shown up in a user's log! Maybe making the warning more visible and having the call-stack information available will help pinpoint the source of the problem. Signed-off-by:
-
Oliver Neukum authored
there's code unclean w.r.t. endianness in the mos7720 driver. Signed-off-by:
-
Adrian Bunk authored
NULL checks should be before the first dereference. Spotted by the Coverity checker. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Oliver Neukum authored
Am Montag, 19. 2007 10:25 schrieb Adrian Bunk: > The Coverity checker spotted the following NULL dereference: And this fixes an oops upon allocation failures. Signed-off-by:
-
Randy Dunlap authored
Fix sparse NULL warnings: drivers/usb/net/dm9601.c:88:23: warning: Using plain integer as NULL pointer drivers/usb/net/dm9601.c:174:22: warning: Using plain integer as NULL pointer Signed-off-by:
Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by:
-
Richard Knutsson authored
Signed-off-by:
-
Oliver Neukum authored
This fixes: - breaking DMA rules about buffers - usage of _global_ variables to save a single device's attributes - racy access to urb->status - smp monotonity issue with statistics - use of one buffer for many simultaneous URBs - error handling introduced - several instances of following NULL pointers - use after free - unnecessary GFP_ATOMIC - GFP_KERNEL in interrupt - various cleanups - write room granularity issue that bit cdc-acm - race in shutdown Signed-off-by:
-
Oliver Neukum authored
io_edgeport is using a global variable without locking. This is _the_ classical race condition. This patch switches to atomic_t. Signed-off-by:
-
