- 05 Sep, 2006 16 commits
-
-
andrzej zaborowski authored
This adds a driver for the PWL module of OMAP CPUs in the Linux backlight API. The driver allows changing the backlight instensity and switching it off when system goes idle. The declaration of struct omap_backlight_config is sent in a separate patch. Signed-off-by: Andrzej Zaborowski <balrog@zabor.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
andrzej zaborowski authored
Prevent keyboard interrupt from staying masked when omap-keypad driver is suspended to allow this interrupt to trigger a system wake up. Locks are used as suggested by Juha Yrjölä. Signed-off-by: Andrzej Zaborowski <balrog@zabor.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Dirk Behme authored
Add GPIO API howto. Signed-off-by: Arnold <abo_gwapo_at_yahoo.com> Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Dirk Behme authored
Remove warnings: arch/arm/plat-omap/dsp/dsp_common.c: In function 'dsp_cpustat_update': arch/arm/plat-omap/dsp/dsp_common.c:317: warning: implicit declaration of function 'enable_irq' arch/arm/plat-omap/dsp/dsp_common.c:325: warning: implicit declaration of function 'disable_irq' arch/arm/plat-omap/dsp/task.c: In function 'dsp_task_write_bk': arch/arm/plat-omap/dsp/task.c:1232: warning: implicit declaration of function 'disable_irq' arch/arm/plat-omap/dsp/task.c:1232: warning: implicit declaration of function 'enable_irq' Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
These accidentally got changed to readw in musb-m1 patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
-
David Brownell authored
Catch up to info from latest HDRC core spec ... some new registers and fields, and constraints notably - not clearing TX fifo unless it's empty (that might explain some host side glitching). - not all POWER fields are writable Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
-
Tony Lindgren authored
Make TUSB DMA debug less verbose Signed-off-by: Tony Lindgren <tony@atomide.com>
-
David Brownell authored
tusb multipoint fixes
-
David Brownell authored
Whitespace, indentation, and line length fixes. Constify the gadget ep0 method table.
-
David Brownell authored
Preliminary high speed electrical test support for the host side.
-
Tony Lindgren authored
It got broken by musb-m1 snapshot. Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
TUSB uses non-flat register model, and also has TUSB specific ep registers in addition to shared MUSB ep registers. Signed-off-by: Tony Lindgren <tony@atomide.com>
-
David Brownell authored
This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. This patch still needs clean-up work before it will be submitted to the mainline kernel. For more information, please see: http://sourceforge.net/mailarchive/forum.php?thread_id=30389954&forum_id=5398
-
Juha Yrjola authored
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
-
Juha Yrjola authored
-
Tony Lindgren authored
-
- 04 Sep, 2006 4 commits
-
-
Tony Lindgren authored
-
Tony Lindgren authored
-
Linus Torvalds authored
-
Benjamin Herrenschmidt authored
New sparse caught that typo which could have caused erratic hardware behaviour on some machines if the platform functions are used by the firmware to change bits in some FCR registers. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 02 Sep, 2006 4 commits
-
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] 8250: constify some serial structs [SERIAL] Make uart_match_port() work with all memory mapped UARTs
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3762/1: Fix ptrace cache coherency bug for ARM1136 VIPT nonaliasing Harvard caches [ARM] 3765/1: S3C24XX: cleanup include/asm-arm/arch-s3c2410/dma.h [ARM] 3764/1: S3C24XX: change type naming to kernel style [ARM] 3763/1: add both rtcs to csb337 defconfig [ARM] Fix ARM __raw_read_trylock() implementation [ARM] 3750/3: Fix double VFP emulation for EABI kernels
-
Oleg Nesterov authored
It is not possible to find a sub-thread in ->children/->ptrace_children lists, ptrace_attach() does not allow to attach to sub-threads. Even if it was possible to ptrace the task from the same thread group, we can't allow to release ->group_leader while there are others (ptracer) threads in the same group. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
George G. Davis authored
Patch from George G. Davis Resolve ARM1136 VIPT non-aliasing cache coherency issues observed when using ptrace to set breakpoints and cleanup copy_{to,from}_user_page() while we're here as requested by Russell King because "it's also far too heavy on non-v6 CPUs". NOTES: 1. Only access_process_vm() calls copy_{to,from}_user_page(). 2. access_process_vm() calls get_user_pages() to pin down the "page". 3. get_user_pages() calls flush_dcache_page(page) which ensures cache coherency between kernel and userspace mappings of "page". However flush_dcache_page(page) may not invalidate I-Cache over this range for all cases, specifically, I-Cache is not invalidated for the VIPT non-aliasing case. So memory is consistent between kernel and user space mappings of "page" but I-Cache may still be hot over this range. IOW, we don't have to worry about flush_cache_page() before memcpy(). 4. Now, for the copy_to_user_page() case, after memcpy(), we must flush the caches so memory is consistent with kernel cache entries and invalidate the I-Cache if this mm region is executable. We don't need to do anything after memcpy() for the copy_from_user_page() case since kernel cache entries will be invalidated via the same process above if we access "page" again. The flush_ptrace_access() function (borrowed from SPARC64 implementation) is added to handle cache flushing after memcpy() for the copy_to_user_page() case. Signed-off-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 01 Sep, 2006 16 commits
-
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: uhci-hcd: fix list access bug USB: Support for ELECOM LD-USB20 in pegasus USB: Add VIA quirk fixup for VT8235 usb2 USB: rtl8150_disconnect() needs tasklet_kill() USB Storage: unusual_devs.h for Sony Ericsson M600i USB Storage: Remove the finecam3 unusual_devs entry UHCI: don't stop at an Iso error usb gadget: g_ether spinlock recursion fix USB: add all wacom device to hid-core.c blacklist hid-core.c: Adds all GTCO CalComp Digitizers and InterWrite School Products to blacklist USB floppy drive SAMSUNG SFD-321U/EP detected 8 times
-
Benjamin Herrenschmidt authored
Fix some more problems (inverted use of semaphores in some places). He also moved my checks into within the protected section which is better. Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Badari Pulavarty authored
Missed a place where I forgot to convert kfree() to kmem_cache_free() as part of jbd-manage-its-own-slab changes. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Nishanth Aravamudan authored
Since vma->vm_pgoff is in units of smallpages, VMAs for huge pages have the lower HPAGE_SHIFT - PAGE_SHIFT bits always cleared, which results in badd offsets to the interleave functions. Take this difference from small pages into account when calculating the offset. This does add a 0-bit shift into the small-page path (via alloc_page_vma()), but I think that is negligible. Also add a BUG_ON to prevent the offset from growing due to a negative right-shift, which probably shouldn't be allowed anyways. Tested on an 8-memory node ppc64 NUMA box and got the interleaving I expected. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Andi Kleen <ak@muc.de> Acked-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
John Keller authored
Fix some bugs in the patch that converted the IOC4 driver from port IO ops to memio ops. http://marc.theaimsgroup.com/?l=linux-ide&m=114895892231438&w=2 Problems fixed are: - Call to default_hwif_mmiops() was not being done until _after_ first IO operation, resulting in the first IO operation being done as a port IO op, instead of memio. - request_region() calls needed to be request_mem_region() - Incomplete error case handling. - Non-usage of ioremap() and __iomem. Signed-off-by: John Keller <jpk@sgi.com> Signed-off-by: Jeremy Higdon <jeremy@sgi.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Takashi Iwai authored
Revert the mixer element names of some Mic controls to the state of 2.6.17. This should fix the name mismatch in alsactl. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: Jaroslav Kysela <perex@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Benjamin Herrenschmidt authored
The port to genirq & the new powerpc interrupt model in 2.6.18 introduced a bug in the legacy PowerMac PIC code (used on older machines) because of a typo potentially causing hangs due to interrupt storms. This fixes it, along with a performance issue causing us to do spurrious retriggers after masking an interrupt. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Benjamin Herrenschmidt authored
The via-pmu backlight code (introduced in 2.6.18) has various design issues causing crashes on machines using it like the old Wallstreet powerbook (Michael, the author, never managed to test on these and I just got my hand on one of those old beasts). This fixes them by no longer trying to hijack the backlight device of the frontmost framebuffer (causing that framebuffer to crash) but having it's own local bits instead. Might look weird but it's better that way on those old machines, at least as a last-minute fix for 2.6.18. We might rework the whole thing later. This patch also changes the way it gets notified of sleep and wakeup in order to properly shut the backlight down on sleep and bring it back on wakeup. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Pavel Mironchik authored
This patch works around a complex dm-related deadlock/livelock down in the mempool allocator. Alasdair said: Several dm targets suffer from this. Mempools are not yet used correctly everywhere in device-mapper: they can get shared when devices are stacked, and some targets share them across multiple instances. I made fixing this one of the prerequisites for this patch: md-dm-reduce-stack-usage-with-stacked-block-devices.patch which in some cases makes people more likely to hit the problem. There's been some progress on this recently with (unfinished) dm-crypt patches at: http://www.kernel.org/pub/linux/kernel/people/agk/patches/2.6/editing/ (dm-crypt-move-io-to-workqueue.patch plus dependencies) and: I've no problems with a temporary workaround like that, but Milan Broz (a new Redhat developer in the Czech Republic) has started reviewing all the mempool usage in device-mapper so I'm expecting we'll soon have a proper fix for this associated problems. [He's back from holiday at the start of next week.] For now, this sad-but-safe little patch will allow the machine to recover. [akpm@osdl.org: rewrote changelog] Cc: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Adrian Bunk authored
This patch schedules obsolete OSS drivers (with ALSA drivers that support the same hardware) for removal. A rationale of the patch is in http://lkml.org/lkml/2006/7/11/186Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Corey Minyard authored
Olaf Kirch of SuSE tracked down a problem where module unloads of the IPMI driver would occasionally result in Oopses. He tracked that down to a variable that wasn't always initialized properly in some situations. This patch initializes that variable. Olaf sent a patch that kzalloc-ed the data, but this structure is large enough that I would perfer to not do that. Thanks Olaf! Signed-off-by: Corey Minyard <minyard@acm.org> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Henrik Kretzschmar authored
Adds the description of the parameters from handle_bad_irq(). Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ian E. Morgan authored
The last argument of module_param is permissions, not default value. Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Olaf Hering authored
modprobe -v floppy on a Apple G5 writes incorrect stuff to dmesg: Floppy drive(s): fd0 is 2.88M The reason is that the legacy io check happens very late, when part of the floppy stuff is already initialized. check_legacy_ioport() returns either -ENODEV right away, or it walks the device-tree looking for a floppy node. Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
Vitezslav Samel <samel@mail.cz> reports that an HP DL380 g4 fails using the default arch due to the ISA bus having an ID of 32. It would have worked OK with the generic arch - for some reason the default arch doesn't support as many busses. So bump that up to support 256 busses, but leave it at 32 if we're building a tiny system to save a bit of memory. Cc: Vitezslav Samel <samel@mail.cz> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Bill Huey (hui authored
We're testing the wrong task_struct field. Acked-by: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-