- 28 Apr, 2008 40 commits
-
-
Akinobu Mita authored
Check ext3_journal_get_write_access() errors. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Akinobu Mita authored
Use ext3_get_group_desc() Signed-off-by:
-
Akinobu Mita authored
Add missing ext3_journal_stop() in error handling. Signed-off-by:
-
Akinobu Mita authored
Use ext3_group_first_block_no() Signed-off-by:
-
Adrian Bunk authored
Make the needlessly global ext3_xattr_list() static. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
Marcin Slusarz authored
Convert byte order of constant instead of variable which can be done at compile time (vs run time). Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
-
Hisashi Hifumi authored
Currently fdatasync is identical to fsync in ext3. I think fdatasync should skip journal flush in data=ordered and data=writeback mode when it overwrites to already-instantiated blocks on HDD. When I_DIRTY_DATASYNC flag is not set, fdatasync should skip journal writeout because this indicates only atime or/and mtime updates. Following patch is the same approach of ext2's fsync code(ext2_sync_file). I did a performance test using the sysbench. #sysbench --num-threads=128 --max-requests=50000 --test=fileio --file-total-size=128G --file-test-mode=rndwr --file-fsync-mode=fdatasync run The result on ext3 was: -2.6.24 Operations performed: 0 Read, 50080 Write, 59600 Other = 109680 Total Read 0b Written 782.5Mb Total transferred 782.5Mb (12.116Mb/sec) 775.45 Requests/sec executed Test execution summary: total time: 64.5814s total number of events: 50080 total time taken by event execution: 3713.9836 per-request statistics: min: 0.0000s avg: 0.0742s max: 0.9375s approx. 95 percentile: 0.2901s Threads fairness: events (avg/stddev): 391.2500/23.26 execution time (avg/stddev): 29.0155/1.99 -2.6.24-patched Operations performed: 0 Read, 50009 Write, 61596 Other = 111605 Total Read 0b Written 781.39Mb Total transferred 781.39Mb (16.419Mb/sec) 1050.83 Requests/sec executed Test execution summary: total time: 47.5900s total number of events: 50009 total time taken by event execution: 2934.5768 per-request statistics: min: 0.0000s avg: 0.0587s max: 0.8938s approx. 95 percentile: 0.1993s Threads fairness: events (avg/stddev): 390.6953/22.64 execution time (avg/stddev): 22.9264/1.17 Filesystem I/O throughput was improved. Signed-off-by :Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Acked-by:
Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
-
Aneesh Kumar K.V authored
If the block allocator gets blocks out of system zone ext2 calls ext2_error. But if the file system is mounted with errors=continue retry block allocation. We need to mark the system zone blocks as in use to make sure retry don't pick them again System zone is the block range mapping block bitmap, inode bitmap and inode table. [akpm@linux-foundation.org: fix typo in comment] Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Julia Lawall authored
if (...) BUG(); should be replaced with BUG_ON(...) when the test has no side-effects to allow a definition of BUG_ON that drops the code completely. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @ disable unlikely @ expression E,f; @@ ( if (<... f(...) ...>) { BUG(); } | - if (unlikely(E)) { BUG(); } + BUG_ON(E); ) @@ expression E,f; @@ ( if (<... f(...) ...>) { BUG(); } | - if (E) { BUG(); } + BUG_ON(E); ) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Akinobu Mita authored
Use ext2_fsblk_t type for filesystem-wide blocks number Signed-off-by:
-
Akinobu Mita authored
Use ext2_group_first_block_no() and assign the return values to ext2_fsblk_t variables. Signed-off-by:
-
Akinobu Mita authored
Improve ext2_readdir() return value for ext2_get_page() failure by using the actual result of ext2_get_page(). Signed-off-by:
-
Marcin Slusarz authored
Convert byte order of constant instead of variable which can be done at compile time (vs run time). Signed-off-by:
-
Marcin Slusarz authored
replace all: little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) + expression_in_cpu_byteorder); with: leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder); generated with semantic patch Signed-off-by:
-
Bjorn Helgaas authored
Convert quirk printks to dev_printk(). [akpm@linux-foundation.org: fix warnings, improve output text] Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by:
-
Bjorn Helgaas authored
print_fn_descriptor_symbol() prints the address if we don't have a symbol, so no need to print both. Signed-off-by:
-
Bjorn Helgaas authored
Every PNP device should have a valid protocol pointer. If it doesn't, something's wrong and we should oops so we can find and fix the problem. Signed-off-by:
-
Julia Lawall authored
The functions time_before, time_before_eq, time_after, and time_after_eq are more robust for comparing jiffies against other values. A simplified version of the semantic patch making this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @ change_compare_np @ expression E; @@ ( - jiffies <= E + time_before_eq(jiffies,E) | - jiffies >= E + time_after_eq(jiffies,E) | - jiffies < E + time_before(jiffies,E) | - jiffies > E + time_after(jiffies,E) ) @ include depends on change_compare_np @ @@ #include <linux/jiffies.h> @ no_include depends on !include && change_compare_np @ @@ #include <linux/...> + #include <linux/jiffies.h> // </smpl> [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Nick Andrew authored
MD drivers use one printk() call to print 2 log messages and the second line may be prefixed by a TAB character. It may also output a trailing space before newline. klogd (I think) turns the TAB character into the 2 characters '^I' when logging to a file. This looks ugly. Instead of a leading TAB to indicate continuation, prefix both output lines with 'raid:' or similar. Also remove any trailing space in the vicinity of the affected code and consistently end the sentences with a period. Signed-off-by:
Nick Andrew <nick@nick-andrew.net> Cc: Neil Brown <neilb@suse.de> Signed-off-by:
-
Dan Williams authored
strict_strtoul handles the open-coded sanity checks in raid5_store_stripe_cache_size and raid5_store_preread_threshold Acked-by:
NeilBrown <neilb@suse.de> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Dan Williams authored
Improve write performance by preventing the delayed_list from dumping all its stripes onto the handle_list in one shot. Delayed stripes are now further delayed by being held on the 'hold_list'. The 'hold_list' is bypassed when: * a STRIPE_IO_STARTED stripe is found at the head of 'handle_list' * 'handle_list' is empty and i/o is being done to satisfy full stripe-width write requests * 'bypass_count' is less than 'bypass_threshold'. By default the threshold is 1, i.e. every other stripe handled is a preread stripe provided the top two conditions are false. Benchmark data: System: 2x Xeon 5150, 4x SATA, mem=1GB Baseline: 2.6.24-rc7 Configuration: mdadm --create /dev/md0 /dev/sd[b-e] -n 4 -l 5 --assume-clean Test1: dd if=/dev/zero of=/dev/md0 bs=1024k count=2048 * patched: +33% (stripe_cache_size = 256), +25% (stripe_cache_size = 512) Test2: tiobench --size 2048 --numruns 5 --block 4096 --block 131072 (XFS) * patched: +13% * patched + preread_bypass_threshold = 0: +37% Changes since v1: * reduce bypass_threshold from (chunk_size / sectors_per_chunk) to (1) and make it configurable. This defaults to fairness and modest performance gains out of the box. Changes since v2: * [neilb@suse.de]: kill STRIPE_PRIO_HI and preread_needed as they are not necessary, the important change was clearing STRIPE_DELAYED in add_stripe_bio and this has been moved out to make_request for the hang fix. * [neilb@suse.de]: simplify get_priority_stripe * [dan.j.williams@intel.com]: reset the bypass_count when ->hold_list is sampled empty (+11%) * [dan.j.williams@intel.com]: decrement the bypass_count at the detection of stripes being naturally promoted off of hold_list +2%. Note, resetting bypass_count instead of decrementing on these events yields +4% but that is probably too aggressive. Changes since v3: * cosmetic fixups Tested-by:James W. Laferriere <babydr@baby-dragons.com> Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
drivers/md/md.c:734:16: warning: Using plain integer as NULL pointer drivers/md/md.c:1115:16: warning: Using plain integer as NULL pointer Add some braces to match the else-block as well. Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
Mike Frysinger <vapier.adi@gmail.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Andrew Morton authored
Fix a couple of error-patch oopses identified by Marcio Buss in http://bugzilla.kernel.org/show_bug.cgi?id=9567. Cc: Marcio Buss <marciobuss@gmail.com> Cc: Jeff Zhou <xinzhou.sjtu@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Maik Broemme authored
Add support for the 965G and 965GM graphic chipsets to the intelfb driver. I have a notebook with an Intel Mobile GM965/GL960 Integrated Graphics Controller and with the attached patch the framebuffer comes up. I have tested it a bit with DirectFB to make sure it is working stable. I also have an Intel Mobile GM945 and I compared the results, the programming interface of the 9xx series from Intel is mostly the same, so I think the patch should add all the functionality which the 945GM has. Signed-off-by:
Maik Broemme <mbroemme@plusserver.de> Cc: Dave Airlie <airlied@linux.ie> Cc: Antonino Daplas <adaplas@pol.net> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by:
-
Alexey Dobriyan authored
Note: looks like accesses to "registered_fb" are done without any exclusion so there're none in new proc code, too. This should be fixed in separate patch. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Andrew Morton authored
Fix bug identified by Daniel Marjamki: `m' is leaked on the error path. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=10452 Cc: Daniel Marjamki <danielm77@spray.se> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by:
-
Jaya Kumar authored
This patch splits hecubafb into the platform independent hecubafb and the platform dependent n411. Signed-off-by:
Jaya Kumar <jayakumar.lkml@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Sebastian Siewior authored
Right now, if request_irq or anthing after it fails than we free the firmware for the second time what might end bad :) Signed-off-by:
Sebastian Siewior <sebastian@breakpoint.cc> Acked-by:
-
Jaya Kumar authored
This patch splits metronomefb into the platform independent metronomefb and the platform dependent am200epd. Signed-off-by:
-
Jaya Kumar authored
This patch is a bugfix for hecubafb_write which would return an incorrect error value for the bytecount from framebuffer writes. Signed-off-by:
-
Jaya Kumar authored
This patch is a bugfix for the use of cfb_* functions instead of sys_* functions. sys_* should be used with vmalloced framebuffers. the previous cfb_ use would not work for callers of imageblit/etc. Signed-off-by:
-
York Sun authored
Add platform code to support Freescale DIU. The platform code includes framebuffer memory allocation, pixel format, monitor port, etc. Signed-off-by:
York Sun <yorksun@freescale.com> Signed-off-by:
Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
York Sun authored
The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by:
-
Alexey Dobriyan authored
Mostly signedness fixes. nv10_sim_state existence in both drivers suggests that one of them should be removed, but that's for later. Signed-off-by:
-
Alexey Dobriyan authored
Both FB_RIVA and FB_NVIDIA depends on PCI, so CONFIG_PCI always defined for them. Signed-off-by:
-
