Commit 8b3e6cdc authored by Dan Williams's avatar Dan Williams Committed by Linus Torvalds

md: introduce get_priority_stripe() to improve raid456 write performance

Improve write performance by preventing the delayed_list from dumping all its
stripes onto the handle_list in one shot.  Delayed stripes are now further
delayed by being held on the 'hold_list'.  The 'hold_list' is bypassed when:

  * a STRIPE_IO_STARTED stripe is found at the head of 'handle_list'
  * 'handle_list' is empty and i/o is being done to satisfy full stripe-width
    write requests
  * 'bypass_count' is less than 'bypass_threshold'.  By default the threshold
    is 1, i.e. every other stripe handled is a preread stripe provided the
    top two conditions are false.

Benchmark data:
System: 2x Xeon 5150, 4x SATA, mem=1GB
Baseline: 2.6.24-rc7
Configuration: mdadm --create /dev/md0 /dev/sd[b-e] -n 4 -l 5 --assume-clean
Test1: dd if=/dev/zero of=/dev/md0 bs=1024k count=2048
  * patched:  +33% (stripe_cache_size = 256), +25% (stripe_cache_size = 512)

Test2: tiobench --size 2048 --numruns 5 --block 4096 --block 131072 (XFS)
  * patched: +13%
  * patched + preread_bypass_threshold = 0: +37%

Changes since v1:
* reduce bypass_threshold from (chunk_size / sectors_per_chunk) to (1) and
  make it configurable.  This defaults to fairness and modest performance
  gains out of the box.
Changes since v2:
* [neilb@suse.de]: kill STRIPE_PRIO_HI and preread_needed as they are not
  necessary, the important change was clearing STRIPE_DELAYED in
  add_stripe_bio and this has been moved out to make_request for the hang
  fix.
* [neilb@suse.de]: simplify get_priority_stripe
* [dan.j.williams@intel.com]: reset the bypass_count when ->hold_list is
  sampled empty (+11%)
* [dan.j.williams@intel.com]: decrement the bypass_count at the detection
  of stripes being naturally promoted off of hold_list +2%.  Note, resetting
  bypass_count instead of decrementing on these events yields +4% but that is
  probably too aggressive.
Changes since v3:
* cosmetic fixups
Tested-by: default avatarJames W. Laferriere <babydr@baby-dragons.com>
Signed-off-by: default avatarDan Williams <dan.j.williams@intel.com>
Signed-off-by: default avatarNeil Brown <neilb@suse.de>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent e46b272b
......@@ -450,3 +450,9 @@ These currently include
there are upper and lower limits (32768, 16). Default is 128.
strip_cache_active (currently raid5 only)
number of active entries in the stripe cache
preread_bypass_threshold (currently raid5 only)
number of times a stripe requiring preread will be bypassed by
a stripe that does not require preread. For fairness defaults
to 1. Setting this to 0 disables bypass accounting and
requires preread stripes to wait until all full-width stripe-
writes are complete. Valid values are 0 to stripe_cache_size.
......@@ -63,6 +63,7 @@
#define STRIPE_SHIFT (PAGE_SHIFT - 9)
#define STRIPE_SECTORS (STRIPE_SIZE>>9)
#define IO_THRESHOLD 1
#define BYPASS_THRESHOLD 1
#define NR_HASH (PAGE_SIZE / sizeof(struct hlist_head))
#define HASH_MASK (NR_HASH - 1)
......@@ -398,6 +399,7 @@ static void ops_run_io(struct stripe_head *sh)
might_sleep();
set_bit(STRIPE_IO_STARTED, &sh->state);
for (i = disks; i--; ) {
int rw;
struct bio *bi;
......@@ -1720,6 +1722,9 @@ handle_write_operations5(struct stripe_head *sh, int rcw, int expand)
locked++;
}
}
if (locked + 1 == disks)
if (!test_and_set_bit(STRIPE_FULL_WRITE, &sh->state))
atomic_inc(&sh->raid_conf->pending_full_writes);
} else {
BUG_ON(!(test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags) ||
test_bit(R5_Wantcompute, &sh->dev[pd_idx].flags)));
......@@ -1947,6 +1952,9 @@ handle_requests_to_failed_array(raid5_conf_t *conf, struct stripe_head *sh,
STRIPE_SECTORS, 0, 0);
}
if (test_and_clear_bit(STRIPE_FULL_WRITE, &sh->state))
if (atomic_dec_and_test(&conf->pending_full_writes))
md_wakeup_thread(conf->mddev->thread);
}
/* __handle_issuing_new_read_requests5 - returns 0 if there are no more disks
......@@ -2149,6 +2157,10 @@ static void handle_completed_write_requests(raid5_conf_t *conf,
0);
}
}
if (test_and_clear_bit(STRIPE_FULL_WRITE, &sh->state))
if (atomic_dec_and_test(&conf->pending_full_writes))
md_wakeup_thread(conf->mddev->thread);
}
static void handle_issuing_new_write_requests5(raid5_conf_t *conf,
......@@ -2333,6 +2345,9 @@ static void handle_issuing_new_write_requests6(raid5_conf_t *conf,
s->locked++;
set_bit(R5_Wantwrite, &sh->dev[i].flags);
}
if (s->locked == disks)
if (!test_and_set_bit(STRIPE_FULL_WRITE, &sh->state))
atomic_inc(&conf->pending_full_writes);
/* after a RECONSTRUCT_WRITE, the stripe MUST be in-sync */
set_bit(STRIPE_INSYNC, &sh->state);
......@@ -3094,6 +3109,8 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
else
continue;
set_bit(STRIPE_IO_STARTED, &sh->state);
bi = &sh->dev[i].req;
bi->bi_rw = rw;
......@@ -3164,7 +3181,7 @@ static void raid5_activate_delayed(raid5_conf_t *conf)
clear_bit(STRIPE_DELAYED, &sh->state);
if (!test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
atomic_inc(&conf->preread_active_stripes);
list_add_tail(&sh->lru, &conf->handle_list);
list_add_tail(&sh->lru, &conf->hold_list);
}
} else
blk_plug_device(conf->mddev->queue);
......@@ -3442,6 +3459,58 @@ static int chunk_aligned_read(struct request_queue *q, struct bio * raid_bio)
}
}
/* __get_priority_stripe - get the next stripe to process
*
* Full stripe writes are allowed to pass preread active stripes up until
* the bypass_threshold is exceeded. In general the bypass_count
* increments when the handle_list is handled before the hold_list; however, it
* will not be incremented when STRIPE_IO_STARTED is sampled set signifying a
* stripe with in flight i/o. The bypass_count will be reset when the
* head of the hold_list has changed, i.e. the head was promoted to the
* handle_list.
*/
static struct stripe_head *__get_priority_stripe(raid5_conf_t *conf)
{
struct stripe_head *sh;
pr_debug("%s: handle: %s hold: %s full_writes: %d bypass_count: %d\n",
__func__,
list_empty(&conf->handle_list) ? "empty" : "busy",
list_empty(&conf->hold_list) ? "empty" : "busy",
atomic_read(&conf->pending_full_writes), conf->bypass_count);
if (!list_empty(&conf->handle_list)) {
sh = list_entry(conf->handle_list.next, typeof(*sh), lru);
if (list_empty(&conf->hold_list))
conf->bypass_count = 0;
else if (!test_bit(STRIPE_IO_STARTED, &sh->state)) {
if (conf->hold_list.next == conf->last_hold)
conf->bypass_count++;
else {
conf->last_hold = conf->hold_list.next;
conf->bypass_count -= conf->bypass_threshold;
if (conf->bypass_count < 0)
conf->bypass_count = 0;
}
}
} else if (!list_empty(&conf->hold_list) &&
((conf->bypass_threshold &&
conf->bypass_count > conf->bypass_threshold) ||
atomic_read(&conf->pending_full_writes) == 0)) {
sh = list_entry(conf->hold_list.next,
typeof(*sh), lru);
conf->bypass_count -= conf->bypass_threshold;
if (conf->bypass_count < 0)
conf->bypass_count = 0;
} else
return NULL;
list_del_init(&sh->lru);
atomic_inc(&sh->count);
BUG_ON(atomic_read(&sh->count) != 1);
return sh;
}
static int make_request(struct request_queue *q, struct bio * bi)
{
......@@ -3914,7 +3983,6 @@ static void raid5d(mddev_t *mddev)
handled = 0;
spin_lock_irq(&conf->device_lock);
while (1) {
struct list_head *first;
struct bio *bio;
if (conf->seq_flush != conf->seq_write) {
......@@ -3936,17 +4004,12 @@ static void raid5d(mddev_t *mddev)
handled++;
}
if (list_empty(&conf->handle_list)) {
sh = __get_priority_stripe(conf);
if (!sh) {
async_tx_issue_pending_all();
break;
}
first = conf->handle_list.next;
sh = list_entry(first, struct stripe_head, lru);
list_del_init(first);
atomic_inc(&sh->count);
BUG_ON(atomic_read(&sh->count)!= 1);
spin_unlock_irq(&conf->device_lock);
handled++;
......@@ -4010,6 +4073,42 @@ raid5_stripecache_size = __ATTR(stripe_cache_size, S_IRUGO | S_IWUSR,
raid5_show_stripe_cache_size,
raid5_store_stripe_cache_size);
static ssize_t
raid5_show_preread_threshold(mddev_t *mddev, char *page)
{
raid5_conf_t *conf = mddev_to_conf(mddev);
if (conf)
return sprintf(page, "%d\n", conf->bypass_threshold);
else
return 0;
}
static ssize_t
raid5_store_preread_threshold(mddev_t *mddev, const char *page, size_t len)
{
raid5_conf_t *conf = mddev_to_conf(mddev);
char *end;
int new;
if (len >= PAGE_SIZE)
return -EINVAL;
if (!conf)
return -ENODEV;
new = simple_strtoul(page, &end, 10);
if (!*page || (*end && *end != '\n'))
return -EINVAL;
if (new > conf->max_nr_stripes || new < 0)
return -EINVAL;
conf->bypass_threshold = new;
return len;
}
static struct md_sysfs_entry
raid5_preread_bypass_threshold = __ATTR(preread_bypass_threshold,
S_IRUGO | S_IWUSR,
raid5_show_preread_threshold,
raid5_store_preread_threshold);
static ssize_t
stripe_cache_active_show(mddev_t *mddev, char *page)
{
......@@ -4026,6 +4125,7 @@ raid5_stripecache_active = __ATTR_RO(stripe_cache_active);
static struct attribute *raid5_attrs[] = {
&raid5_stripecache_size.attr,
&raid5_stripecache_active.attr,
&raid5_preread_bypass_threshold.attr,
NULL,
};
static struct attribute_group raid5_attrs_group = {
......@@ -4130,12 +4230,14 @@ static int run(mddev_t *mddev)
init_waitqueue_head(&conf->wait_for_stripe);
init_waitqueue_head(&conf->wait_for_overlap);
INIT_LIST_HEAD(&conf->handle_list);
INIT_LIST_HEAD(&conf->hold_list);
INIT_LIST_HEAD(&conf->delayed_list);
INIT_LIST_HEAD(&conf->bitmap_list);
INIT_LIST_HEAD(&conf->inactive_list);
atomic_set(&conf->active_stripes, 0);
atomic_set(&conf->preread_active_stripes, 0);
atomic_set(&conf->active_aligned_reads, 0);
conf->bypass_threshold = BYPASS_THRESHOLD;
pr_debug("raid5: run(%s) called.\n", mdname(mddev));
......
......@@ -252,6 +252,8 @@ struct r6_state {
#define STRIPE_EXPANDING 9
#define STRIPE_EXPAND_SOURCE 10
#define STRIPE_EXPAND_READY 11
#define STRIPE_IO_STARTED 12 /* do not count towards 'bypass_count' */
#define STRIPE_FULL_WRITE 13 /* all blocks are set to be overwritten */
/*
* Operations flags (in issue order)
*/
......@@ -316,12 +318,17 @@ struct raid5_private_data {
int previous_raid_disks;
struct list_head handle_list; /* stripes needing handling */
struct list_head hold_list; /* preread ready stripes */
struct list_head delayed_list; /* stripes that have plugged requests */
struct list_head bitmap_list; /* stripes delaying awaiting bitmap update */
struct bio *retry_read_aligned; /* currently retrying aligned bios */
struct bio *retry_read_aligned_list; /* aligned bios retry list */
atomic_t preread_active_stripes; /* stripes with scheduled io */
atomic_t active_aligned_reads;
atomic_t pending_full_writes; /* full write backlog */
int bypass_count; /* bypassed prereads */
int bypass_threshold; /* preread nice */
struct list_head *last_hold; /* detect hold_list promotions */
atomic_t reshape_stripes; /* stripes with pending writes for reshape */
/* unfortunately we need two cache names as we temporarily have
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment