- 26 Apr, 2008 40 commits
-
-
Yinghai Lu authored
scan AMD opteron io/mmio routing to make sure every pci root bus get correct resource range. Thus later pci scan could assign correct resource to device with unassigned resource. this can fix a system without _CRS for multi pci root bus. Signed-off-by:
Yinghai Lu <yinghai.lu@sun.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Yinghai Lu authored
... so we use the same code with Quad core cpu as old opteron. This patch is useful when acpi=off or _PXM is not there in DSDT. Signed-off-by:
-
Yinghai Lu authored
Currently, on an amd k8 system with multi ht chains, the numa_node of pci devices under /sys/devices/pci0000:80/* is always 0, even if that chain is on node 1 or 2 or 3. Workaround: pcibus_to_node(bus) is used when we want to get the node that pci_device is on. In struct device, we already have numa_node member, and we could use dev_to_node()/set_dev_node() to get and set numa_node in the device. set_dev_node is called in pci_device_add() with pcibus_to_node(bus), and pcibus_to_node uses bus->sysdata for nodeid. The problem is when pci_add_device is called, bus->sysdata is not assigned correct nodeid yet. The result is that numa_node will always be 0. pcibios_scan_root and pci_scan_root could take sysdata. So we need to get mp_bus_to_node mapping before these two are called, and thus get_mp_bus_to_node could get correct node for sysdata in root bus. In scanning of the root bus, all child busses will take parent bus sysdata. So all pci_device->dev.numa_node will be assigned correctly and automatically. Later we could use dev_to_node(&pci_dev->dev) to get numa_node, and we could also could make other bus specific device get the correct numa_node too. This is an updated version of pci_sysdata and Jeff's pci_domain patch. [ mingo@elte.hu: build fix ] Signed-off-by:
-
Yinghai Lu authored
doesn't need to check if it is type1 or type2, we can use raw_pci_ops directly. also make pci_direct_conf1 static again. anyway is there system with type 2 and mmconf support? Signed-off-by:
-
Yinghai Lu authored
mmconfig is only used to access extended configuration space. so don't need to reject MFG that only have one entry and only handle bus0. Signed-off-by:
-
Yinghai Lu authored
in the device_add, we try to use use parent numa_node. need to make sure pci root bus's bridge device numa_node is set. then we could use device->numa_node direclty for all device. and don't need to call pcibus_to_node(). Signed-off-by:
-
Yinghai Lu authored
Separate mmconf for fam10h out from setup_64.c Signed-off-by:
-
Yinghai Lu authored
some BIOS only let AMD fam 10h handle bus0, and nvidia mcp55/ck804 to handle other buses. at that case MCFG will cover all over them. but with acpi=off, we can not use MCFG. this patch will double check the busnbits, and if it is less handling 256 bues, and acpi=off will forcely reset the mmconf in msr, so we still use mmconf in above case. Signed-off-by:
-
Yinghai Lu authored
so even booting kernel with acpi=off or even MCFG is not there, we still can use MMCONFIG. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Yinghai Lu authored
So we can use MMCONF when MMCONF is not set by BIOS using TOP_MEM2 msr to get memory top, and try to scan fam10h mmio routing to make sure the range is not conflicted with some prefetch MMIO that is above 4G. (current only LinuxBIOS assign 64 bit mmio above 4G for some co-processor) Signed-off-by:
-
Yinghai Lu authored
reuse pci_cfg_space_size but skip check pci express and pci-x CAP ID. Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Yinghai Lu authored
Patch "x86: validate against ACPI motherboard resources" changed the mmconf init sequence, and init MMCONF late in acpi_init. here change it back to old sequence: 1. check hostbridge in early 2. check MCFG with e820 in early 3. if all fail, will check MCFg with acpi _CRS in acpi_init So we can make MCONF working again when acpi=off is set if hostbridge support that. Signed-off-by:
-
Yinghai Lu authored
For x86_64, need to free pci_mmcfg_virt, and iounmap some pointers when MMCONF is not reserved in E820 or acpi _CRS and get rejected. Signed-off-by:
-
Robert Hancock authored
This path adds validation of the MMCONFIG table against the ACPI reserved motherboard resources. If the MMCONFIG table is found to be reserved in ACPI, we don't bother checking the E820 table. The PCI Express firmware spec apparently tells BIOS developers that reservation in ACPI is required and E820 reservation is optional, so checking against ACPI first makes sense. Many BIOSes don't reserve the MMCONFIG region in E820 even though it is perfectly functional, the existing check needlessly disables MMCONFIG in these cases. In order to do this, MMCONFIG setup has been split into two phases. If PCI configuration type 1 is not available then MMCONFIG is enabled early as before. Otherwise, it is enabled later after the ACPI interpreter is enabled, since we need to be able to execute control methods in order to check the ACPI reserved resources. Presently this is just triggered off the end of ACPI interpreter initialization. There are a few other behavioral changes here: - Validate all MMCONFIG configurations provided, not just the first one. - Validate the entire required length of each configuration according to the provided ending bus number is reserved, not just the minimum required allocation. - Validate that the area is reserved even if we read it from the chipset directly and not from the MCFG table. This catches the case where the BIOS didn't set the location properly in the chipset and has mapped it over other things it shouldn't have. This also cleans up the MMCONFIG initialization functions so that they simply do nothing if MMCONFIG is not compiled in. Based on an original patch by Rajesh Shah from Intel. [akpm@linux-foundation.org: many fixes and cleanups] Signed-off-by:
Robert Hancock <hancockr@shaw.ca> Signed-off-by:
Andi Kleen <ak@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Andi Kleen <ak@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Linus Torvalds authored
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootmem-v3 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootmem-v3: x86_64/mm: check and print vmemmap allocation continuous x86_64: fix setup_node_bootmem to support big mem excluding with memmap x86_64: make reserve_bootmem_generic() use new reserve_bootmem() mm: allow reserve_bootmem() cross nodes mm: offset align in alloc_bootmem() mm: fix alloc_bootmem_core to use fast searching for all nodes mm: make mem_map allocation continuous
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: kbuild: scripts/Makefile.modpost typo fix kbuild: soften MODULE_LICENSE check
-
Yinghai Lu authored
On big systems with lots of memory, don't print out too much during bootup, and make it easy to find if it is continuous. on 256G 8 sockets system will get [ffffe20000000000-ffffe20002bfffff] PMD -> [ffff810001400000-ffff810003ffffff] on node 0 [ffffe2001c700000-ffffe2001c7fffff] potential offnode page_structs [ffffe20002c00000-ffffe2001c7fffff] PMD -> [ffff81000c000000-ffff8100255fffff] on node 0 [ffffe20038700000-ffffe200387fffff] potential offnode page_structs [ffffe2001c800000-ffffe200387fffff] PMD -> [ffff810820200000-ffff81083c1fffff] on node 1 [ffffe20040000000-ffffe2007fffffff] PUD ->ffff811027a00000 on node 2 [ffffe20038800000-ffffe2003fffffff] PMD -> [ffff811020200000-ffff8110279fffff] on node 2 [ffffe20054700000-ffffe200547fffff] potential offnode page_structs [ffffe20040000000-ffffe200547fffff] PMD -> [ffff811027c00000-ffff81103c3fffff] on node 2 [ffffe20070700000-ffffe200707fffff] potential offnode page_structs [ffffe20054800000-ffffe200707fffff] PMD -> [ffff811820200000-ffff81183c1fffff] on node 3 [ffffe20080000000-ffffe200bfffffff] PUD ->ffff81202fa00000 on node 4 [ffffe20070800000-ffffe2007fffffff] PMD -> [ffff812020200000-ffff81202f9fffff] on node 4 [ffffe2008c700000-ffffe2008c7fffff] potential offnode page_structs [ffffe20080000000-ffffe2008c7fffff] PMD -> [ffff81202fc00000-ffff81203c3fffff] on node 4 [ffffe200a8700000-ffffe200a87fffff] potential offnode page_structs [ffffe2008c800000-ffffe200a87fffff] PMD -> [ffff812820200000-ffff81283c1fffff] on node 5 [ffffe200c0000000-ffffe200ffffffff] PUD ->ffff813037a00000 on node 6 [ffffe200a8800000-ffffe200bfffffff] PMD -> [ffff813020200000-ffff8130379fffff] on node 6 [ffffe200c4700000-ffffe200c47fffff] potential offnode page_structs [ffffe200c0000000-ffffe200c47fffff] PMD -> [ffff813037c00000-ffff81303c3fffff] on node 6 [ffffe200c4800000-ffffe200e07fffff] PMD -> [ffff813820200000-ffff81383c1fffff] on node 7 instead of a very long print out... Signed-off-by:
Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by:
-
Yinghai Lu authored
typical case: four sockets system, every node has 4g ram, and we are using: memmap=10g$4g to mask out memory on node1 and node2 when numa is enabled, early_node_mem is used to get node_data and node_bootmap. if it can not get memory from the same node with find_e820_area(), it will use alloc_bootmem to get buff from previous nodes. so check it and print out some info about it. need to move early_res_to_bootmem into every setup_node_bootmem. and it takes range that node has. otherwise alloc_bootmem could return addr that reserved early. depends on "mm: make reserve_bootmem can crossed the nodes". Signed-off-by:
-
Yinghai Lu authored
"mm: make reserve_bootmem can crossed the nodes" provides new reserve_bootmem(), let reserve_bootmem_generic() use that. reserve_bootmem_generic() is used to reserve initramdisk, so this way we can make sure even when bootloader or kexec load ranges cross the node memory boundaries, reserve_bootmem still works. Signed-off-by:
-
Yinghai Lu authored
split reserve_bootmem_core() into two functions, one which checks conflicts, and one which sets the bits. and make reserve_bootmem to loop bdata_list to cross the nodes. user could be crashkernel and ramdisk..., in case the range provided by those externalities crosses the nodes. Signed-off-by:
-
Yinghai Lu authored
need offset alignment when node_boot_start's alignment is less than the alignment required. use local node_boot_start to match alignment - so don't add extra operation in search loop. Signed-off-by:
-
Yinghai Lu authored
Make the nodes other than node 0 use bdata->last_success for fast search too. We need to use __alloc_bootmem_core() for vmemmap allocation for other nodes when numa and sparsemem/vmemmap are enabled. Also, make fail_block path increase i with incr only after ALIGN to avoid extra increase when size is larger than align. Signed-off-by:
-
Yinghai Lu authored
vmemmap allocation currently has this layout: [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001400000 on node 0 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001800000 on node 0 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001c00000 on node 0 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810002000000 on node 0 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002400000 on node 0 ... note that there is a 2M hole between them - not optimal. the root cause is that usemap (24 bytes) will be allocated after every 2M mem_map, and it will push next vmemmap (2M) to the next (2M) alignment. solution: try to allocate the mem_map continously. after the patch, we get: [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001400000 on node 0 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001800000 on node 0 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001a00000 on node 0 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810001c00000 on node 0 ... which is the ideal layout. and usemap will share a page because of they are allocated continuously too: sparse_early_usemap_alloc: usemap = ffff810024e00000 size = 24 sparse_early_usemap_alloc: usemap = ffff810024e00080 size = 24 sparse_early_usemap_alloc: usemap = ffff810024e00100 size = 24 sparse_early_usemap_alloc: usemap = ffff810024e00180 size = 24 ... so we make the bootmem allocation more compact and use less memory for usemap => mission accomplished ;-) Signed-off-by:
-
Linus Torvalds authored
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-generic-bitops-v3 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-generic-bitops-v3: x86, bitops: select the generic bitmap search functions x86: include/asm-x86/pgalloc.h/bitops.h: checkpatch cleanups - formatting only x86: finalize bitops unification x86, UML: remove x86-specific implementations of find_first_bit x86: optimize find_first_bit for small bitmaps x86: switch 64-bit to generic find_first_bit x86: generic versions of find_first_(zero_)bit, convert i386 bitops: use __fls for fls64 on 64-bit archs generic: implement __fls on all 64-bit archs generic: introduce a generic __fls implementation x86: merge the simple bitops and move them to bitops.h x86, generic: optimize find_next_(zero_)bit for small constant-size bitmaps x86, uml: fix uml with generic find_next_bit for x86 x86: change x86 to use generic find_next_bit uml: Kconfig cleanup uml: fix build error
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (46 commits) ide: constify struct ide_dma_ops ide: add struct ide_dma_ops (take 3) ide: add IDE_HFLAG_SERIALIZE_DMA host flag sl82c105: check bridge revision in sl82c105_init_one() au1xxx-ide: use ->init_dma method palm_bk3710: use ->init_dma method sgiioc4: use ->init_dma method icside: use ->init_dma method ide-pmac: use ->init_dma method ide: do complete DMA setup in ->init_dma method (take 2) au1xxx-ide: fix MWDMA support ide: cleanup ide_setup_dma() ide: factor out setting PCI bus-mastering from ide_hwif_setup_dma() ide: export ide_allocate_dma_engine() ide: move ide_setup_dma() call out from ->init_dma method alim15x3: skip DMA initialization completely on revs < 0x20 pdc202xx_old: remove init_dma_pdc202xx() ide: don't display "BIOS" settings in ide_setup_dma() ide: remove ->cds field from ide_hwif_t (take 2) ide: remove ide_dma_iobase() ...
-
Linus Torvalds authored
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootparam * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootparam: x86, boot: Document for linked list of struct setup_data x86, boot: export linked list of struct setup_data via debugfs x86, boot: add linked list of struct setup_data x86, boot: add free_early to early reservation machanism
-
Bartlomiej Zolnierkiewicz authored
* Export ide_dma_exec_cmd() and __ide_dma_test_irq(). * Constify struct ide_dma_ops. * Always set hwif->dma_ops to &sff_dma_ops in ide_setup_dma() (it is later overriden by ide_init_port() if needed) and drop 'const struct ide_port_info *d' argument. While at it: * Rename __ide_dma_test_irq() to ide_dma_test_irq(). Acked-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Add struct ide_dma_ops and convert core code + drivers to use it. While at it: * Drop "ide_" prefix from ->ide_dma_end and ->ide_dma_test_irq methods. * Drop "ide_" "infixes" from DMA methods. * au1xxx-ide.c: - use auide_dma_{test_irq,end}() directly in auide_dma_timeout() * pdc202xx_old.c: - drop "old_" "infixes" from DMA methods * siimage.c: - add siimage_dma_test_irq() helper - print SATA warning in siimage_init_one() * Remove no longer needed ->init_hwif implementations. v2: * Changes based on review from Sergei: - s/siimage_ide_dma_test_irq/siimage_dma_test_irq/ - s/drive->hwif/hwif/ in idefloppy_pc_intr(). - fix patch description w.r.t. au1xxx-ide changes - fix au1xxx-ide build - fix naming for cmd64*_dma_ops - drop "ide_" and "old_" infixes - s/hpt3xxx_dma_ops/hpt37x_dma_ops/ - s/hpt370x_dma_ops/hpt370_dma_ops/ - use correct DMA ops for HPT302/N, HPT371/N and HPT374 - s/it821x_smart_dma_ops/it821x_pass_through_dma_ops/ v3: * Two bugs slipped in v2 (noticed by Sergei): - use correct DMA ops for HPT374 (for real this time) - handle HPT370/HPT370A properly Acked-by: -
Bartlomiej Zolnierkiewicz authored
* Add IDE_HFLAG_SERIALIZE_DMA host flag to serialize ports if DMA is available and handle it in ide_init_port(). * Convert sl82c105 host driver to use this new flag. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
* Make sl82c105_bridge_revision() return 'u8' instead of 'unsigned long'. * Check bridge revision in sl82c105_init_one(). While at: * Use proper KERN_ level for printk(). Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
* Pass 'ide_hwif_t *hwif' instead of '_auide_hwif *auide' to auide_ddma_init(). * Add 'const struct ide_port_info *d' argument to auide_ddma_init(). * Convert the driver to use ->init_dma method. Acked-by:
-
Bartlomiej Zolnierkiewicz authored
* Move DMA setup to palm_bk3710_init_dma(). * Convert the driver to use ->init_dma method. Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by:
-
Bartlomiej Zolnierkiewicz authored
* Move dma_base check from sgiioc4_ide_setup_pci_device() to ide_dma_sgiioc4(). * Replace ide_dma_sgiioc4() 'unsigned long dma_base' argument by 'const struct ide_port_info *d'. * Move hwif->INB setup from ide_init_sgiioc4() to sgiioc4_ide_setup_pci_device(). * Move ide_init_sgiioc4() call from sgiioc4_ide_setup_pci_device() to ide_dma_sgiioc4(). * Convert the driver to use ->init_dma method. Cc: Jeremy Higdon <jeremy@sgi.com> Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
* Add 'const struct ide_port_info *d' argument to icside_dma_init(). * Make icside_dma_init() return an error value and add icside_dma_off_init() (->init_dma implementation for case when DMA cannot be enabled). * Convert the driver to use ->init_dma method. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
* Move pmif->dma_regs check from pmac_ide_setup_device() to pmac_ide_init_dma(). * Get 'pmif' from 'hwif->hwif_data' in pmac_ide_init_dma() and replace 'pmac_ide_hwif_t *pmif' argument by 'const struct ide_port_info *d'. * Add pmac_ide_init_dma() implementation for CONFIG_BLK_DEV_IDEDMA_PMAC=n case and convert the driver to use ->init_dma method. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
* Make ide_hwif_setup_dma() return an error value. * Pass 'const struct ide_port_info *d' instead of 'unsigned long dmabase' to ->init_dma method and make it return an error value. * Rename ide_get_or_set_dma_base() to ide_pci_dma_base(), change ordering of its arguments and then export it. * Export ide_pci_set_master(). * Do complete DMA setup inside ->init_dma method and update ->init_dma users accordingly. * Sanitize code for DMA setup in ide_init_port(). v2: * Fix for CONFIG_BLK_DEV_IDEDMA_PCI=n configs (from Jiri Slaby <jirislaby@gmail.com>): Fix following compiler warning by returning EINVAL: In file included from ANYTHING-INCLUDING-IDE.H:45: include/linux/ide.h: In function ‘ide_hwif_setup_dma’: include/linux/ide.h:1022: warning: no return statement in function returning non-void Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by:
-
Bartlomiej Zolnierkiewicz authored
Always use "fast" MWDMA support and remove dma_{black,white}_list (they were based on completely bogus ->ide_dma_check implementation which didn't set neither the host controller timings nor the device for the desired transfer mode). Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
* There is no need to call ide_release_dma_engine(). * Move the code up to (and including) ide_allocate_dma_engine() call to the callers of ide_setup_dma(). There should be no functional changes caused by this patch. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
Factor out setting PCI bus-mastering from ide_hwif_setup_dma() to ide_pci_set_master() helper. While at it: * don't read PCI Command register if not necessary * use PCI device name instead of hwif->name * cleanup ide_hwif_setup_dma() a bit Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
Export ide_allocate_dma_engine() and use it in trm290 host driver. Acked-by:
-
