Commit 35ddd068 authored by Yinghai Lu's avatar Yinghai Lu Committed by Ingo Molnar

x86: use bus conf in NB conf fun1 to get bus range on, on 64-bit

... so we use the same code with Quad core cpu as old opteron.

This patch is useful when acpi=off or _PXM is not there in DSDT.
Signed-off-by: default avatarYinghai Lu <yinghai.lu@sun.com>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
parent 871d5f8d
......@@ -12,15 +12,18 @@
* RED-PEN empty cpus get reported wrong
*/
#define NODE_ID_REGISTER 0x60
#define NODE_ID(dword) (dword & 0x07)
#define LDT_BUS_NUMBER_REGISTER_0 0x94
#define LDT_BUS_NUMBER_REGISTER_1 0xB4
#define LDT_BUS_NUMBER_REGISTER_2 0xD4
#define NR_LDT_BUS_NUMBER_REGISTERS 3
#define SECONDARY_LDT_BUS_NUMBER(dword) ((dword >> 8) & 0xFF)
#define SUBORDINATE_LDT_BUS_NUMBER(dword) ((dword >> 16) & 0xFF)
#define NODE_ID(dword) ((dword>>4) & 0x07)
#define LDT_BUS_NUMBER_REGISTER_0 0xE0
#define LDT_BUS_NUMBER_REGISTER_1 0xE4
#define LDT_BUS_NUMBER_REGISTER_2 0xE8
#define LDT_BUS_NUMBER_REGISTER_3 0xEC
#define NR_LDT_BUS_NUMBER_REGISTERS 4
#define SECONDARY_LDT_BUS_NUMBER(dword) ((dword >> 16) & 0xFF)
#define SUBORDINATE_LDT_BUS_NUMBER(dword) ((dword >> 24) & 0xFF)
#define PCI_DEVICE_ID_K8HTCONFIG 0x1100
#define PCI_DEVICE_ID_K8_10H_HTCONFIG 0x1200
#define PCI_DEVICE_ID_K8_11H_HTCONFIG 0x1300
#ifdef CONFIG_NUMA
......@@ -67,12 +70,19 @@ early_fill_mp_bus_to_node(void)
#ifdef CONFIG_NUMA
int i, j;
unsigned slot;
u32 ldtbus, nid;
u32 ldtbus;
u32 id;
static int lbnr[3] = {
int node;
u16 deviceid;
u16 vendorid;
int min_bus;
int max_bus;
static int lbnr[NR_LDT_BUS_NUMBER_REGISTERS] = {
LDT_BUS_NUMBER_REGISTER_0,
LDT_BUS_NUMBER_REGISTER_1,
LDT_BUS_NUMBER_REGISTER_2
LDT_BUS_NUMBER_REGISTER_2,
LDT_BUS_NUMBER_REGISTER_3
};
for (i = 0; i < BUS_NR; i++)
......@@ -81,38 +91,36 @@ early_fill_mp_bus_to_node(void)
if (!early_pci_allowed())
return -1;
for (slot = 0x18; slot < 0x20; slot++) {
id = read_pci_config(0, slot, 0, PCI_VENDOR_ID);
if (id != (PCI_VENDOR_ID_AMD | (PCI_DEVICE_ID_K8HTCONFIG<<16)))
break;
nid = read_pci_config(0, slot, 0, NODE_ID_REGISTER);
for (i = 0; i < NR_LDT_BUS_NUMBER_REGISTERS; i++) {
ldtbus = read_pci_config(0, slot, 0, lbnr[i]);
/*
* if there are no busses hanging off of the current
* ldt link then both the secondary and subordinate
* bus number fields are set to 0.
*
* RED-PEN
* This is slightly broken because it assumes
* HT node IDs == Linux node ids, which is not always
* true. However it is probably mostly true.
*/
if (!(SECONDARY_LDT_BUS_NUMBER(ldtbus) == 0
&& SUBORDINATE_LDT_BUS_NUMBER(ldtbus) == 0)) {
for (j = SECONDARY_LDT_BUS_NUMBER(ldtbus);
j <= SUBORDINATE_LDT_BUS_NUMBER(ldtbus);
j++) {
int node = NODE_ID(nid);
mp_bus_to_node[j] = (unsigned char)node;
}
}
}
slot = 0x18;
id = read_pci_config(0, slot, 0, PCI_VENDOR_ID);
vendorid = id & 0xffff;
if (vendorid != PCI_VENDOR_ID_AMD)
goto out;
deviceid = (id>>16) & 0xffff;
if ((deviceid != PCI_DEVICE_ID_K8HTCONFIG) &&
(deviceid != PCI_DEVICE_ID_K8_10H_HTCONFIG) &&
(deviceid != PCI_DEVICE_ID_K8_11H_HTCONFIG))
goto out;
for (i = 0; i < NR_LDT_BUS_NUMBER_REGISTERS; i++) {
ldtbus = read_pci_config(0, slot, 1, lbnr[i]);
/* Check if that register is enabled for bus range */
if ((ldtbus & 7) != 3)
continue;
min_bus = SECONDARY_LDT_BUS_NUMBER(ldtbus);
max_bus = SUBORDINATE_LDT_BUS_NUMBER(ldtbus);
node = NODE_ID(ldtbus);
for (j = min_bus; j <= max_bus; j++)
mp_bus_to_node[j] = (unsigned char) node;
}
out:
for (i = 0; i < BUS_NR; i++) {
int node = mp_bus_to_node[i];
node = mp_bus_to_node[i];
if (node >= 0)
printk(KERN_DEBUG "bus: %02x to node: %02x\n", i, node);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment