There are some hardware-related issues on RealView EB and the interrupt
controller cannot cope with polling its registers.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Otherwise, the caches can become uncoherent between cores.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The FSR bit 11 is not set by a memory write causing a data abort while
in Jazelle state, making the copy-on-write mechanism unusable. This
workaround marks repetitive Jazelle data aborts on the same address as
write aborts.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch adds the I-cache invalidation in update_mmu_cache if the
corresponding vma is marked as executable. It also invalidates the
I-cache if a thread migrates to a CPU it never ran on.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The patch adds CLREX (or a dummy STREX) to the vector stub and removes
it from the __switch_to function. This allows the atomic_set to be a
simple STR instruction.

Linux currently clears the exclusive monitor at every context switch,
allowing threads to use plain STR for atomic store
operations. However, this is not enough for atomic operations in
signal handler. The patch fixes this case as well.

Note that for the SMP case, plain STR clears the state of the global
exclusive monitor. The effect of an STR on the local exclusive monitor
is implementation defined and therefore a CLREX is needed at exception
taking.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch adds the necessary entries to the Makefile and Kconfig
files for building the Thumb-2 kernel.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch sets bit 30 in the CP15 system control register so that the
exceptions are handled in Thumb mode when the MMU is disabled.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch adds the ARM/Thumb-2 unified support the RealView boards.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch adds the ARM/Thumb-2 unified support the Integrator boards.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch adds the ARM/Thumb-2 unified support for the
arch/arm/boot/* files.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch modifies the VFP files for the ARM/Thumb-2 unified
assembler syntax.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch adds ARM/Thumb-2 unified support for spinlocks, mutexes,
semaphores and the atomic operations.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch adds the ARM/Thumb-2 unified support for the arch/arm/lib/*
files.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch adds the ARM/Thumb-2 unified support to the arch/arm/mm/*
files.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch implements the ARM/Thumb-2 unified kernel start-up and
exception handling code.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch adds various C and assembler macros that help with using
the unified assembler syntax for compiling files to either ARM or
Thumb-2 modes.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This declaration specifies the "function" type for various assembly
functions, needed for generating the correct branch instructions in
Thumb-2.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

By default, this option was selected by the platform Kconfig. This
patch adds "depends on" to L2X0 so that it can be enabled/disabled
manually.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch enables the building of Linux for the PB1176 platform.
Signed-off-by: Bahadir Balban <bahadir.balban@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch adds the UART0 base address detection in uncompress.h.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The UART0 address is different on PB1176 from EB or PB11MPCore. This
patch adds the necessary #ifdef's to this file. The disadvantage is
that enabling CONFIG_DEBUG_LL will work properly on PB1176 if only
this platform is enabled.
Signed-off-by: Bahadir Balban <bahadir.balban@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch adds the base files for the PB1176 platform support.
Signed-off-by: Bahadir Balban <bahadir.balban@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch adds the resource and device definitions for the compact
flash.
Signed-off-by: Bahadir Balban <bahadir.balban@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch adds the PB11MPCore support to the corresponding Kconfig
and Makefile to enable building.
Signed-off-by: Bahadir Balban <bahadir.balban@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch adds the UART address detection in uncompress.h for the
PB11MPCore platform.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch adds the initialisation calls for the SMP support on the
PB11MPCore platform.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch adds the base files for the PB11MPCore platform support.
Signed-off-by: Bahadir Balban <bahadir.balban@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch changes the IO_ADDRESS macro for the RealView platforms to
accomodate a wider range of physical addresses on PB11MPCore.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch changes the CPU_V7 configuration dependency to allow
MACH_REALVIEW_EB.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The upcoming PB11MPCore and PB1176 have different memory maps and some
of the definitions in platform.h are no longer common. This patch
moves them to the board-eb.h file and updates their usage in
realview_eb.c.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Since the PB1176 has different UART base addresses, this patch moves
the definitions form platorm.h to board-eb.h. It also modifies
uncompress.h to detect the platform type at run-time.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch moves the timer definitions from platform.h into board-eb.h
as they are different on PB11MPCore and PB1176. It also adds
timerX_va_base variables in core.c which are set by the
realview_eb_timer_init function before invoking realview_timer_init.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This patch moves the patch definitions into board-eb.h and
realview_eb.c (from core.c) as they are different on the PB11MPCore
and PB1176 platforms.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This is in preparation for the RealView PB11MPCore and PB1176 patches
which have different base addresses for the GIC.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Signed-off-by: Bahadir Balban <bahadir.balban@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Signed-off-by: Bahadir Balban <bahadir.balban@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Signed-off-by: Bahadir Balban <bahadir.balban@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The patch updates the SMSC911x device driver to support the latest
NAPI changes.
Signed-off-by: Bahadir Balban <bahadir.balban@arm.com>

Device driver for the SMSC LAN911x/LAN921x families embedded Ethernet
chips.
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>