RealView/EB PCI Support (MEM only)

Signed-off-by: Bahadir Balban <bahadir.balban@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arch/arm/Kconfig

@@ -547,7 +547,7 @@ config ISA_DMA_API
 	bool
 
 config PCI
-	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE
+	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE || MACH_REALVIEW_EB
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside

arch/arm/mach-realview/Makefile

@@ -6,3 +6,4 @@ obj-y					:= core.o clock.o
 obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
 obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o localtimer.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
+obj-$(CONFIG_PCI)			+= pci.o

arch/arm/mach-realview/pci.c

+/*
+ *  linux/arch/arm/mach-realview/pci.c
+ *
+ * (C) Copyright Koninklijke Philips Electronics NV 2004. All rights reserved.
+ * You can redistribute and/or modify this software under the terms of version 2
+ * of the GNU General Public License as published by the Free Software Foundation.
+ * THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY WARRANTY; WITHOUT EVEN THE IMPLIED
+ * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ * Koninklijke Philips Electronics nor its subsidiaries is obligated to provide any support for this software.
+ *
+ * ARM Versatile PCI driver.
+ *
+ * 14/04/2005 Initial version, colin.king@philips.com
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/init.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/mach/pci.h>
+
+/*
+ * these spaces are mapped using the following base registers:
+ *
+ * Usage Local Bus Memory         Base/Map registers used
+ *
+ * Mem   50000000 - 5FFFFFFF      LB_BASE0/LB_MAP0,  non prefetch
+ * Mem   60000000 - 6FFFFFFF      LB_BASE1/LB_MAP1,  prefetch
+ * IO    44000000 - 4FFFFFFF      LB_BASE2/LB_MAP2,  IO
+ * Cfg   42000000 - 42FFFFFF	  PCI config
+ *
+ */
+#define SYS_PCICTL			IO_ADDRESS(REALVIEW_SYS_PCICTL)
+#define PCI_IMAP0			IO_ADDRESS(REALVIEW_EB_PCI_CORE_BASE+0x0)
+#define PCI_IMAP1			IO_ADDRESS(REALVIEW_EB_PCI_CORE_BASE+0x4)
+#define PCI_IMAP2			IO_ADDRESS(REALVIEW_EB_PCI_CORE_BASE+0x8)
+#define PCI_SELFID			IO_ADDRESS(REALVIEW_EB_PCI_CORE_BASE+0xc)
+#define PCI_FLAGS			IO_ADDRESS(REALVIEW_EB_PCI_CORE_BASE+0x10)
+#define PCI_SMAP0			IO_ADDRESS(REALVIEW_EB_PCI_CORE_BASE+0x14)
+#define PCI_SMAP1			IO_ADDRESS(REALVIEW_EB_PCI_CORE_BASE+0x18)
+#define PCI_SMAP2			IO_ADDRESS(REALVIEW_EB_PCI_CORE_BASE+0x1C)
+
+#define DEVICE_ID_OFFSET		0x00
+#define CSR_OFFSET			0x04
+#define CLASS_ID_OFFSET			0x08
+
+#define VP_PCI_DEVICE_ID		0x030010ee
+#define VP_PCI_CLASS_ID			0x0b400000
+
+static unsigned long pci_slot_ignore = 0;
+
+static int __init realview_eb_pci_slot_ignore(char *str)
+{
+	int retval;
+	int slot;
+
+	while ((retval = get_option(&str,&slot))) {
+		if ((slot < 0) || (slot > 31)) {
+			printk("Illegal slot value: %d\n",slot);
+		} else {
+			pci_slot_ignore |= (1 << slot);
+		}
+	}
+	return 1;
+}
+
+__setup("pci_slot_ignore=", realview_eb_pci_slot_ignore);
+
+
+static unsigned long __pci_addr(struct pci_bus *bus,
+				unsigned int devfn, int offset)
+{
+	unsigned int busnr = bus->number;
+
+	/*
+	 * Trap out illegal values
+	 */
+	if (offset > 255)
+		BUG();
+	if (busnr > 255)
+		BUG();
+	if (devfn > 255)
+		BUG();
+
+	return (REALVIEW_EB_PCI_CFG_VIRT_BASE | (busnr << 16) |
+		(PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | offset);
+}
+
+static int realview_eb_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+				   int size, u32 *val)
+{
+	unsigned long addr = __pci_addr(bus, devfn, where);
+	u32 v;
+	int slot = PCI_SLOT(devfn);
+
+	if (pci_slot_ignore & (1 << slot)) {
+		/* Ignore this slot */
+		switch (size) {
+		case 1:
+			v = 0xff;
+			break;
+		case 2:
+			v = 0xffff;
+			break;
+		default:
+			v = 0xffffffff;
+		}
+	} else {
+		switch (size) {
+		case 1:
+			addr &= ~3;
+			v = __raw_readb(addr);
+			break;
+
+		case 2:
+			v = __raw_readl(addr & ~3);
+			if (addr & 2) v >>= 16;
+ 			v &= 0xffff;
+			break;
+
+		default:
+			addr &= ~3;
+			v = __raw_readl(addr);
+			break;
+		}
+	}
+
+	*val = v;
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int realview_eb_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+				    int size, u32 val)
+{
+	unsigned long addr = __pci_addr(bus, devfn, where);
+	int slot = PCI_SLOT(devfn);
+
+	if (pci_slot_ignore & (1 << slot)) {
+		return PCIBIOS_SUCCESSFUL;
+	}
+
+	switch (size) {
+	case 1:
+		__raw_writeb((u8)val, addr);
+		break;
+
+	case 2:
+		__raw_writew((u16)val, addr);
+		break;
+
+	case 4:
+		__raw_writel(val, addr);
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops pci_realview_eb_ops = {
+	.read	= realview_eb_read_config,
+	.write	= realview_eb_write_config,
+};
+
+static struct resource io_mem = {
+	.name	= "PCI non-prefetchable I/O space",
+	.start	= REALVIEW_EB_PCI_IO_BASE0,
+	.end	= REALVIEW_EB_PCI_IO_BASE0+REALVIEW_EB_PCI_IO_BASE0_SIZE-1,
+	.flags	= IORESOURCE_IO,
+};
+
+static struct resource nonpre_mem0 = {
+	.name	= "PCI memory region 0",
+	.start	= REALVIEW_EB_PCI_MEM_BASE0,
+	.end	= REALVIEW_EB_PCI_MEM_BASE0+REALVIEW_EB_PCI_MEM_BASE0_SIZE-1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct resource pre_mem1 = {
+	.name	= "PCI memory region 1",
+	.start	= REALVIEW_EB_PCI_MEM_BASE1,
+	.end	= REALVIEW_EB_PCI_MEM_BASE1+REALVIEW_EB_PCI_MEM_BASE1_SIZE-1,
+	.flags	= IORESOURCE_MEM | IORESOURCE_PREFETCH,
+};
+
+/* Available but unused yet. To use, it must replace another region
+ * because only 3 available resource slots in pci_sys_data.
+static struct resource pre_mem2 = {
+	.name	= "PCI memory region 2",
+	.start	= REALVIEW_PCI_MEM_BASE2,
+	.end	= REALVIEW_PCI_MEM_BASE2+REALVIEW_PCI_MEM_BASE2_SIZE-1,
+	.flags	= IORESOURCE_MEM | IORESOURCE_PREFETCH,
+};
+*/
+
+static int __init pci_realview_eb_setup_resources(struct resource **resource)
+{
+	int ret = 0;
+
+	ret = request_resource(&iomem_resource, &io_mem);
+	if (ret) {
+		printk(KERN_ERR "PCI: unable to allocate I/O "
+		       "region 0(%d)\n", ret);
+		goto out;
+	}
+	ret = request_resource(&iomem_resource, &nonpre_mem0);
+	if (ret) {
+		printk(KERN_ERR "PCI: unable to allocate non-prefetcheble "
+		       "memory region 0(%d)\n", ret);
+		goto release_io_mem;
+	}
+	ret = request_resource(&iomem_resource, &pre_mem1);
+	if (ret) {
+		printk(KERN_ERR "PCI: unable to allocate prefetchable "
+		       "memory region 1(%d)\n", ret);
+		goto release_nonpre_mem0;
+	}
+
+	/*
+	 * bus->resource[0] is the IO resource for this bus
+	 * bus->resource[1] is the non-prefetchable mem resource 0 for this bus
+	 * bus->resource[2] is the prefetchable mem resource 1 for this bus
+	 */
+	resource[0] = &io_mem;
+	resource[1] = &nonpre_mem0;
+	resource[2] = &pre_mem1;
+
+	/* NOTE: There are only 3 resource slots in struct pci_sys_data.
+	 * Assigning a 4th resource would overwrite swizzle field and
+	 * cause an oops. */
+	goto out;
+
+ release_nonpre_mem0:
+	release_resource(&nonpre_mem0);
+ release_io_mem:
+	release_resource(&io_mem);
+ out:
+	return ret;
+}
+
+int __init pci_realview_eb_setup(int nr, struct pci_sys_data *sys)
+{
+	int ret = 0;
+        int i;
+        int myslot = -1;
+	unsigned long val;
+	void __iomem *local_pci_cfg_base;
+
+	val = __raw_readl(SYS_PCICTL);
+	if (!(val & 1)) {
+		printk("Not plugged into PCI backplane!\n");
+		ret = -EIO;
+		goto out;
+	}
+
+	if (nr == 0) {
+		sys->mem_offset = 0;
+		ret = pci_realview_eb_setup_resources(sys->resource);
+		if (ret < 0) {
+			printk("pci_versatile_setup: resources... oops?\n");
+			goto out;
+		}
+	} else {
+		printk("pci_versatile_setup: resources... nr == 0??\n");
+		goto out;
+	}
+
+	/*
+	 *  We need to discover the PCI core first to configure itself
+	 *  before the main PCI probing is performed
+	 */
+	for (i=0; i<32; i++)
+		if ((__raw_readl(REALVIEW_EB_PCI_VIRT_BASE+(i<<11)+DEVICE_ID_OFFSET) == VP_PCI_DEVICE_ID) &&
+		    (__raw_readl(REALVIEW_EB_PCI_VIRT_BASE+(i<<11)+CLASS_ID_OFFSET) == VP_PCI_CLASS_ID)) {
+			myslot = i;
+			break;
+		}
+
+	if (myslot == -1) {
+		printk("Cannot find PCI core!\n");
+		ret = -EIO;
+		goto out;
+	}
+
+	printk("PCI core found (slot %d)\n",myslot);
+
+	__raw_writel(myslot, PCI_SELFID);
+	local_pci_cfg_base = (void *) REALVIEW_EB_PCI_CFG_VIRT_BASE + (myslot << 11);
+
+	val = __raw_readl(local_pci_cfg_base + CSR_OFFSET);
+	val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
+	__raw_writel(val, local_pci_cfg_base + CSR_OFFSET);
+
+	/*
+	 * Configure the PCI inbound memory windows to be 1:1 mapped to SDRAM
+	 */
+	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_0);
+	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_1);
+	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_2);
+
+	/*
+	 * Do not to map Versatile FPGA PCI device into memory space
+	 */
+	pci_slot_ignore |= (1 << myslot);
+	ret = 1;
+
+ out:
+	return ret;
+}
+
+
+struct pci_bus *pci_realview_eb_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	return pci_scan_bus(sys->busnr, &pci_realview_eb_ops, sys);
+}
+
+void __init pci_realview_eb_preinit(void)
+{
+	__raw_writel(REALVIEW_EB_PCI_MEM_BASE0, PCI_IMAP0);
+	__raw_writel(REALVIEW_EB_PCI_MEM_BASE1, PCI_IMAP1);
+	__raw_writel(REALVIEW_EB_PCI_MEM_BASE2, PCI_IMAP2);
+
+	__raw_writel(PHYS_OFFSET, PCI_SMAP0);
+	__raw_writel(PHYS_OFFSET, PCI_SMAP1);
+	__raw_writel(PHYS_OFFSET, PCI_SMAP2);
+
+	__raw_writel(1, SYS_PCICTL);
+}
+
+/*
+ * Map the specified device/slot/pin to an IRQ.
+ * Different backplanes may need to modify this.
+ */
+static int __init realview_eb_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+	int devslot = PCI_SLOT(dev->devfn);
+
+	/* slot,  pin,	irq
+	 *  24     1     80
+	 *  25     1     81
+	 *  26     1     82
+	 *  27     1     83
+	 */
+	irq = (((devslot - 29) + pin - 1) & 3) + 80;
+
+	printk("PCI map irq: slot %d, pin %d, devslot %d, irq: %d\n",
+	       slot, pin, devslot, irq);
+
+	return irq;
+}
+
+static struct hw_pci realview_eb_pci __initdata = {
+	.swizzle		= NULL,
+	.map_irq		= realview_eb_map_irq,
+	.nr_controllers		= 1,
+	.setup			= pci_realview_eb_setup,
+	.scan			= pci_realview_eb_scan_bus,
+	.preinit		= pci_realview_eb_preinit,
+};
+
+static int __init realview_eb_pci_init(void)
+{
+	pci_common_init(&realview_eb_pci);
+	return 0;
+}
+
+subsys_initcall(realview_eb_pci_init);

arch/arm/mach-realview/realview_eb.c

@@ -82,7 +82,25 @@ static struct map_desc realview_eb_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(REALVIEW_UART0_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
-	}
+	},
+#endif
+#ifdef CONFIG_PCI
+ 	{
+		.virtual	=  IO_ADDRESS(REALVIEW_EB_PCI_CORE_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_EB_PCI_CORE_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	=  REALVIEW_EB_PCI_VIRT_BASE,
+		.pfn		= __phys_to_pfn(REALVIEW_EB_PCI_BASE),
+		.length		= REALVIEW_EB_PCI_BASE_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= REALVIEW_EB_PCI_CFG_VIRT_BASE,
+		.pfn		= __phys_to_pfn(REALVIEW_EB_PCI_CFG_BASE),
+		.length		= REALVIEW_EB_PCI_CFG_BASE_SIZE,
+		.type		= MT_DEVICE
+	},
 #endif
 };
 

include/asm-arm/arch-realview/board-eb.h

@@ -44,6 +44,28 @@
 #define REALVIEW_EB11MP_SYS_PLD_CTRL1	0x74		/* Register offset for MPCore sysctl */
 #endif
 
+#define REALVIEW_EB_PCI_CORE_BASE	0x10019000	/* PCI configuration */
+
+/*
+ * RealView/EB PCI regions
+ */
+#define REALVIEW_EB_PCI_BASE		0x60000000	/* PCI self config */
+#define REALVIEW_EB_PCI_CFG_BASE	0x61000000	/* PCI config */
+#define REALVIEW_EB_PCI_IO_BASE0	0x62000000	/* PCI IO region */
+#define REALVIEW_EB_PCI_MEM_BASE0	0x63000000	/* Memory region 1 */
+#define REALVIEW_EB_PCI_MEM_BASE1	0x64000000	/* Memory region 2 */
+#define REALVIEW_EB_PCI_MEM_BASE2	0x68000000	/* Memory region 3 */
+
+/*
+ * RealView/EB PCI region sizes
+ */
+#define REALVIEW_EB_PCI_BASE_SIZE	0x01000000	/* 16MB */
+#define REALVIEW_EB_PCI_CFG_BASE_SIZE	0x01000000	/* 16MB */
+#define REALVIEW_EB_PCI_IO_BASE0_SIZE	0x01000000	/* 16MB */
+#define REALVIEW_EB_PCI_MEM_BASE0_SIZE	0x01000000	/* 16MB */
+#define REALVIEW_EB_PCI_MEM_BASE1_SIZE	0x04000000	/* 64MB */
+#define REALVIEW_EB_PCI_MEM_BASE2_SIZE	0x08000000	/* 128MB */
+
 #define IRQ_EB_GIC_START	32
 
 /*

include/asm-arm/arch-realview/hardware.h

@@ -24,6 +24,18 @@
 
 #include <asm/sizes.h>
 
+/*
+ * PCI space virtual addresses
+ */
+#define REALVIEW_EB_PCI_VIRT_BASE	0xe8000000
+#define REALVIEW_EB_PCI_CFG_VIRT_BASE	0xe9000000
+
+/* CIK guesswork */
+#define PCIBIOS_MIN_IO			0x62000000
+#define PCIBIOS_MIN_MEM			0x63000000
+
+#define pcibios_assign_all_busses()     1
+
 /* macro to get at IO space when running virtually */
 #ifdef CONFIG_MMU
 #define IO_ADDRESS(x)		((((x) & 0x0effffff) | (((x) >> 4) & 0x0f000000)) + 0xf0000000)

include/asm-arm/arch-realview/platform.h

@@ -201,7 +201,6 @@
 	/* Reserved 0x10016000 */
 #define REALVIEW_RTC_BASE             0x10017000	/* Real Time Clock */
 #define REALVIEW_DMC_BASE             0x10018000	/* DMC configuration */
-#define REALVIEW_PCI_CORE_BASE        0x10019000	/* PCI configuration */
 	/* Reserved 0x1001A000 - 0x1001FFFF */
 #define REALVIEW_CLCD_BASE            0x10020000	/* CLCD */
 #define REALVIEW_DMAC_BASE            0x10030000	/* DMA controller */
@@ -212,19 +211,6 @@
 
 #define REALVIEW_ETH_BASE             0x4E000000	/* Ethernet */
 
-/* PCI space */
-#define REALVIEW_PCI_BASE             0x41000000	/* PCI Interface */
-#define REALVIEW_PCI_CFG_BASE	      0x42000000
-#define REALVIEW_PCI_MEM_BASE0        0x44000000
-#define REALVIEW_PCI_MEM_BASE1        0x50000000
-#define REALVIEW_PCI_MEM_BASE2        0x60000000
-/* Sizes of above maps */
-#define REALVIEW_PCI_BASE_SIZE	       0x01000000
-#define REALVIEW_PCI_CFG_BASE_SIZE    0x02000000
-#define REALVIEW_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
-#define REALVIEW_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
-#define REALVIEW_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
-
 #define REALVIEW_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
 #define REALVIEW_LT_BASE              0x80000000	/* Logic Tile expansion */