- 13 Dec, 2008 15 commits
-
-
Steve Hodgson authored
Each reset is serialised by the rtnl_lock anyway, so there's no win per-NIC. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
A value of 0 means indefinite repetition (until interrupted). Signed-off-by:
-
Ben Hutchings authored
This was only ever needed for an FPGA version of Falcon. Signed-off-by:
-
Ben Hutchings authored
Based on a patch by Andrew Morton. Signed-off-by:
-
Ben Hutchings authored
Set dummy monitor method for unrecognised boards. Clean up board resources if efx_pci_probe_main() fails after board has been initialised. Signed-off-by:
-
Karsten Keil authored
use correct dynamic spinlock init function. Signed-off-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Hannes Eder authored
Impact: make use of the __iomem address space modifier, and change u_char *, u_short * and u_int * to void * Fix more than 30 sparse warnings of this or similar type: drivers/isdn/hardware/mISDN/hfcmulti.c:261:31: warning: incorrect type in argument 2 (different address spaces) drivers/isdn/hardware/mISDN/hfcmulti.c:261:31: got unsigned char [usertype] * drivers/isdn/hardware/mISDN/hfcmulti.c:261:31: expected void volatile [noderef] <asn:2>*addr Signed-off-by:
Hannes Eder <hannes@hanneseder.net> Acked-by:
-
Hannes Eder authored
Fix this warning: drivers/isdn/mISDN/timerdev.c:264:11: warning: incorrect type in initializer (incompatible argument 2 (different address spaces)) drivers/isdn/mISDN/timerdev.c:264:11: expected int ( *read )( ... ) drivers/isdn/mISDN/timerdev.c:264:11: got int ( static [toplevel] *<noident> )( ... ) Signed-off-by:
-
Hannes Eder authored
Fix this sparse warnings: drivers/isdn/hardware/mISDN/hfcmulti.c:794: warning: 'vpm_check' defined but not used drivers/isdn/mISDN/dsp_cmx.c:1546: warning: 'dsp_start_jiffies' defined but not used Signed-off-by:
-
Hannes Eder authored
Impact: rename function scope variable Fix this warning: drivers/isdn/mISDN/l1oip_core.c:472:8: warning: symbol 'id' shadows an earlier one drivers/isdn/mISDN/l1oip_core.c:254:14: originally declared here Signed-off-by:
-
Hannes Eder authored
Impact: define first occurence of variable 'nskb' in inner most possible scope Fix this sparse warning: drivers/isdn/mISDN/dsp_core.c:746:20: warning: symbol 'nskb' shadows an earlier one drivers/isdn/mISDN/dsp_core.c:634:19: originally declared here Signed-off-by:
-
Hannes Eder authored
'plx_lock' is only used within hfcmulti.c. Fix this warning: drivers/isdn/hardware/mISDN/hfcmulti.c:176:1: warning: symbol 'plx_lock' shadows an earlier one drivers/isdn/hardware/mISDN/hfcmulti.c:175:19: originally declared here Signed-off-by:
-
Hannes Eder authored
The warnings fixed by including an header file for the appropriate prototype are marked with "*", for all others the corresonponding symbol has been made static. This patch fixes all such issues in mISDN. Fix this sparse warnings: drivers/isdn/hardware/mISDN/hfcmulti.c:174:5: warning: symbol 'plxsd_master' was not declared. Should it be static? drivers/isdn/hardware/mISDN/hfcmulti.c:426:1: warning: symbol 'write_fifo_regio' was not declared. Should it be static? drivers/isdn/hardware/mISDN/hfcmulti.c:447:1: warning: symbol 'write_fifo_pcimem' was not declared. Should it be static? drivers/isdn/hardware/mISDN/hfcmulti.c:469:1: warning: symbol 'read_fifo_regio' was not declared. Should it be static? drivers/isdn/hardware/mISDN/hfcmulti.c:491:1: warning: symbol 'read_fifo_pcimem' was not declared. Should it be static? drivers/isdn/hardware/mISDN/hfcmulti.c:710:1: warning: symbol 'vpm_init' was not declared. Should it be static? drivers/isdn/hardware/mISDN/hfcmulti.c:793:1: warning: symbol 'vpm_check' was not declared. Should it be static? drivers/isdn/hardware/mISDN/hfcmulti.c:816:1: warning: symbol 'vpm_echocan_on' was not declared. Should it be static? drivers/isdn/hardware/mISDN/hfcmulti.c:848:1: warning: symbol 'vpm_echocan_off' was not declared. Should it be static? * drivers/isdn/mISDN/l1oip_codec.c:224:1: warning: symbol 'l1oip_law_to_4bit' was not declared. Should it be static? * drivers/isdn/mISDN/l1oip_codec.c:261:1: warning: symbol 'l1oip_4bit_to_law' was not declared. Should it be static? * drivers/isdn/mISDN/l1oip_codec.c:281:1: warning: symbol 'l1oip_alaw_to_ulaw' was not declared. Should it be static? * drivers/isdn/mISDN/l1oip_codec.c:294:1: warning: symbol 'l1oip_ulaw_to_alaw' was not declared. Should it be static? * drivers/isdn/mISDN/l1oip_codec.c:311:1: warning: symbol 'l1oip_4bit_free' was not declared. Should it be static? * drivers/isdn/mISDN/l1oip_codec.c:322:1: warning: symbol 'l1oip_4bit_alloc' was not declared. Should it be static? drivers/isdn/mISDN/core.c:29:1: warning: symbol 'device_lock' was not declared. Should it be static? drivers/isdn/mISDN/core.c:34:1: warning: symbol 'bp_lock' was not declared. Should it be static? drivers/isdn/mISDN/core.c:196:1: warning: symbol 'mISDNInit' was not declared. Should it be static? drivers/isdn/mISDN/core.c:227:6: warning: symbol 'mISDN_cleanup' was not declared. Should it be static? drivers/isdn/mISDN/stack.c:40:1: warning: symbol 'mISDN_queue_message' was not declared. Should it be static? * drivers/isdn/mISDN/layer1.c:388:1: warning: symbol 'l1_init' was not declared. Should it be static? * drivers/isdn/mISDN/layer1.c:400:1: warning: symbol 'l1_cleanup' was not declared. Should it be static? drivers/isdn/mISDN/layer2.c:469:1: warning: symbol 'iframe_error' was not declared. Should it be static? drivers/isdn/mISDN/layer2.c:487:1: warning: symbol 'super_error' was not declared. Should it be static? drivers/isdn/mISDN/layer2.c:496:1: warning: symbol 'unnum_error' was not declared. Should it be static? drivers/isdn/mISDN/layer2.c:509:1: warning: symbol 'UI_error' was not declared. Should it be static? drivers/isdn/mISDN/layer2.c:522:1: warning: symbol 'FRMR_error' was not declared. Should it be static? drivers/isdn/mISDN/layer2.c:1069:1: warning: symbol 'enquiry_cr' was not declared. Should it be static? * drivers/isdn/mISDN/layer2.c:2196:1: warning: symbol 'Isdnl2_Init' was not declared. Should it be static? * drivers/isdn/mISDN/layer2.c:2210:1: warning: symbol 'Isdnl2_cleanup' was not declared. Should it be static? drivers/isdn/mISDN/tei.c:397:1: warning: symbol 'random_ri' was not declared. Should it be static? * drivers/isdn/mISDN/timerdev.c:277:1: warning: symbol 'mISDN_inittimer' was not declared. Should it be static? * drivers/isdn/mISDN/timerdev.c:288:6: warning: symbol 'mISDN_timer_cleanup' was not declared. Should it be static? drivers/isdn/mISDN/dsp_core.c:164:12: warning: symbol 'mISDN_dsp_revision' was not declared. Should it be static? drivers/isdn/mISDN/dsp_cmx.c:1543:5: warning: symbol 'samplecount' was not declared. Should it be static? drivers/isdn/mISDN/dsp_cmx.c:1546:5: warning: symbol 'dsp_start_jiffies' was not declared. Should it be static? drivers/isdn/mISDN/dsp_cmx.c:1547:16: warning: symbol 'dsp_start_tv' was not declared. Should it be static? drivers/isdn/mISDN/dsp_tones.c:239:3: warning: symbol 'pattern' was not declared. Should it be static? drivers/isdn/mISDN/dsp_audio.c:33:4: warning: symbol 'dsp_audio_ulaw_to_alaw' was not declared. Should it be static? Signed-off-by:
-
Hannes Eder authored
Impact: change data type for variable 'debug' from *int to *u_int, same for the argument type of mISDN_inittimer In "core.h" mISDN_inittimer is declared with the argument type "*u_int", make the definition in "timerdev.c" match this. This fixes also this warnings: drivers/isdn/mISDN/layer1.c:391:8: warning: incorrect type in assignment (different signedness) drivers/isdn/mISDN/layer1.c:391:8: expected int *static [toplevel] debug drivers/isdn/mISDN/layer1.c:391:8: got unsigned int [usertype] *deb drivers/isdn/mISDN/layer2.c:2200:8: warning: incorrect type in assignment (different signedness) drivers/isdn/mISDN/layer2.c:2200:8: expected int *static [toplevel] debug drivers/isdn/mISDN/layer2.c:2200:8: got unsigned int [usertype] *deb drivers/isdn/mISDN/socket.c:769:8: warning: incorrect type in assignment (different signedness) drivers/isdn/mISDN/socket.c:769:8: expected int *static [toplevel] debug drivers/isdn/mISDN/socket.c:769:8: got unsigned int [usertype] *deb Signed-off-by:
-
Hannes Eder authored
Fix more than 100 (all remaining in mISDN) sparse warnings: drivers/isdn/hardware/mISDN/hfcmulti.c:***:**: warning: Using plain integer as NULL pointer drivers/isdn/mISDN/dsp_tones.c:***:**: warning: Using plain integer as NULL pointer drivers/isdn/mISDN/dsp_pipeline.c:***:**: warning: Using plain integer as NULL pointer Signed-off-by:
-
- 12 Dec, 2008 4 commits
-
-
Daniel Silverstone authored
Implements the KS8695 ethernet device (ks8695net). This driver is only of use on the KS8695 which is an ARM9 based SoC. The documentation on this SoC is sparse and poor, with barely a register description and a rough outline of how the ethernet works, this driver was therefore written with strong reference to the Micrel supplied Linux 2.6.9 port, and to Andrew Victor's ks8695eth driver. Signed-off-by:
Daniel Silverstone <dsilvers@simtec.co.uk> Signed-off-by:
Vincent Sanders <vince@simtec.co.uk> Acked-by:
Ben Dooks <ben@simtec.co.uk> Signed-off-by:
-
Atsushi Nemoto authored
The chip can strip CRC automatically on receiving. Enable it. Also fix potential RX_BUF_SIZE calculation bug which was obscured by alignment. And use proper symbols (NET_IP_ALIGN, ETH_FCS_LEN, etc.) instead of magic numbers. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
-
Steve Glendinning authored
This patch adds a driver for the LAN9240 PCI ethernet adapter. Changes since initial submission: - debug msg_level has been changed to use standard definitions - convert to use net_device_ops Signed-off-by:
Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by:
-
Jeff Kirsher authored
Based on Peter Waskiewicz patch for ixgbe. Add error handling based on Hemminger's recommendation. Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by:
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by:
-
- 11 Dec, 2008 10 commits
-
-
Eric Leblond authored
The patch "don't call nf_log_packet in NFLOG module" make xt_NFLOG dependant of nfnetlink_log. This patch forces the dependencies to fix compilation in case only xt_NFLOG compilation was asked and modifies the help message accordingly to the change. Signed-off-by:
Eric Leblond <eric@inl.fr> Signed-off-by:
-
Benjamin Thery authored
This last patch makes the appropriate changes to use and propagate the network namespace where needed in IPv6 multicast forwarding code. This consists mainly in replacing all the remaining init_net occurences with current netns pointer retrieved from sockets, net devices or mfc6_caches depending on the routines' contexts. Some routines receive a new 'struct net' parameter to propagate the current netns: * ip6mr_get_route * ip6mr_cache_report * ip6mr_cache_find * ip6mr_cache_unresolved * mif6_add/mif6_delete * ip6mr_mfc_add/ip6mr_mfc_delete * ip6mr_reg_vif All the IPv6 multicast forwarding variables moved to struct netns_ipv6 by the previous patches are now referenced in the correct namespace. Changelog: ========== * Take into account the net associated to mfc6_cache when matching entries in mfc_unres_queue list. * Call mroute_clean_tables() in ip6mr_net_exit() to free memory allocated per-namespace. * Call dev_net_set() in ip6mr_reg_vif() to initialize dev->nd_net correctly. Signed-off-by:
Benjamin Thery <benjamin.thery@bull.net> Signed-off-by:
-
Benjamin Thery authored
Declare IPv6 multicast forwarding /proc/net entries per-namespace: /proc/net/ip6_mr_vif /proc/net/ip6_mr_cache Changelog ========= V2: * In routine ipmr_mfc_seq_idx(), only match entries belonging to current netns in mfc_unres_queue list. Signed-off-by:
-
Benjamin Thery authored
Preliminary work to make IPv6 multicast forwarding netns-aware. Declare variable 'reg_vif_num' per-namespace, moves into struct netns_ipv6. At the moment, this variable is only referenced in init_net. Signed-off-by:
-
Benjamin Thery authored
Preliminary work to make IPv6 multicast forwarding netns-aware. Declare IPv6 multicast forwarding variables 'mroute_do_assert' and 'mroute_do_pim' per-namespace in struct netns_ipv6. At the moment, these variables are only referenced in init_net. Signed-off-by:
-
Benjamin Thery authored
Preliminary work to make IPv6 multicast forwarding netns-aware. Declare variable cache_resolve_queue_len per-namespace: moves it into struct netns_ipv6. This variable counts the number of unresolved cache entries queued in the list mfc_unres_queue. This list is kept global to all netns as the number of entries per namespace is limited to 10 (hardcoded in routine ip6mr_cache_unresolved). Entries belonging to different namespaces in mfc_unres_queue will be identified by matching the mfc_net member introduced previously in struct mfc6_cache. Keeping this list global to all netns, also allows us to keep a single timer (ipmr_expire_timer) to handle their expiration. In some places cache_resolve_queue_len value was tested for arming or deleting the timer. These tests were equivalent to testing mfc_unres_queue value instead and are replaced in this patch. At the moment, cache_resolve_queue_len is only referenced in init_net. Signed-off-by:
-
Benjamin Thery authored
Preliminary work to make IPv6 multicast forwarding netns-aware. Dynamically allocates IPv6 multicast forwarding cache, mfc6_cache_array, and moves it to struct netns_ipv6. At the moment, mfc6_cache_array is only referenced in init_net. Replace 'ARRAY_SIZE(mfc6_cache_array)' with mfc6_cache_array size: MFC6_LINES. Signed-off-by:
-
Benjamin Thery authored
This patch stores into struct mfc6_cache the network namespace each mfc6_cache belongs to. The new member is mfc6_net. mfc6_net is assigned at cache allocation and doesn't change during the rest of the cache entry life. This will help to retrieve the current netns around the IPv6 multicast forwarding code. At the moment, all mfc6_cache are allocated in init_net. Changelog: ========== * Use write_pnet()/read_pnet() to set and get mfc6_net. Signed-off-by:
-
Benjamin Thery authored
Preliminary work to make IPv6 multicast forwarding netns-aware. Dynamically allocates interface table vif6_table and moves it to struct netns_ipv6, and updates MIF_EXISTS() macro. At the moment, vif6_table is only referenced in init_net. Signed-off-by:
-
Benjamin Thery authored
Preliminary work to make IPv6 multicast forwarding netns-aware. Make IPv6 multicast forwarding mroute6_socket per-namespace, moves it into struct netns_ipv6. At the moment, mroute6_socket is only referenced in init_net. Signed-off-by:
-
- 10 Dec, 2008 11 commits
-
-
Roel Kluin authored
Sparse asked whether these could be static. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Steve Glendinning authored
Convert the driver to select 16-bit or 32-bit bus access at runtime, at a small performance cost. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Peter P Waskiewicz Jr authored
This patch implements the PCIe Advanced Error Reporting callbacks in ixgbe. The 82598 hardware supports AER, so we enable it. Signed-off-by:
-
Alexander Duyck authored
When running in a virtual environment the ports of an 82575/6 can appear to be single function devices which is not correct. To resolve this we rely on the function number stored in the status register. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Alexander Duyck authored
As we begin to move into virtualization the use of a global value for buffer sizes becomes undesirable. This change makes it so only 256 and 512 byte buffers require use of the RCTL register. Signed-off-by:
-
Holger Eitzenberger authored
Turn all bond_parm_tbls const. Signed-off-by:
Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by:
-
Holger Eitzenberger authored
bond_parse_parm() parses a parameter table for a particular value and is therefore not modifying the table at all. Therefore make the 2nd argument const, thus allowing to make the tables const later. Signed-off-by:
-
Holger Eitzenberger authored
Remove some declarations from bonding.c as they are declared in bonding.h already. Signed-off-by:
-
Holger Eitzenberger authored
Use pr_debug() instead of own macros. Signed-off-by:
-
Holger Eitzenberger authored
This is what I get if debug is enabled: drivers/net/bonding/bond_ipv6.c: In function 'bond_na_send': drivers/net/bonding/bond_ipv6.c:75: error: 'slave' undeclared (first use in this function) drivers/net/bonding/bond_ipv6.c:75: error: (Each undeclared identifier is reported only once drivers/net/bonding/bond_ipv6.c:75: error: for each function it appears in.) This patch fixes that. Signed-off-by:
-
Holger Eitzenberger authored
Use a small array in bond_mode_name() for the names, thus saving some space: before text data bss dec hex filename 57736 9372 344 67452 1077c drivers/net/bonding/bonding.ko after text data bss dec hex filename 57441 9372 344 67157 10655 drivers/net/bonding/bonding.ko Signed-off-by:
-
