* src/network/error.c: added a few more Winsock and QoS error codes

src/network/error.c

@@ -37,57 +37,103 @@ typedef struct
 
 static const wsaerrmsg_t wsaerrmsg[] =
 {
-    { WSAEINTR, "Interrupted by signal" },
+    { WSA_INVALID_HANDLE, "Specified event object handle is invalid" },
+    { WSA_NOT_ENOUGH_MEMORY, "Insufficient memory available" },
+    { WSA_INVALID_PARAMETER, "One or more parameters are invalid" },
+    { WSA_OPERATION_ABORTED, "Overlapped operation aborted" },
+    { WSA_IO_INCOMPLETE, "Overlapped I/O event object not in signaled state" },
+    { WSA_IO_PENDING, "Overlapped operations will complete later" },
+    { WSAEINTR, "Interrupted function call" },
+    { WSAEBADF, "File handle is not valid" },
     { WSAEACCES, "Access denied" },
     { WSAEFAULT, "Invalid memory address" },
     { WSAEINVAL, "Invalid argument" },
     { WSAEMFILE, "Too many open sockets" },
-    { WSAEWOULDBLOCK, "Would block" },
-    //{ WSAEALREADY
+    { WSAEWOULDBLOCK, "Resource temporarily unavailable" },
+    { WSAEINPROGRESS, "Operation now in progress" },
+    { WSAEALREADY, "Operation already in progress" },
     { WSAENOTSOCK, "Non-socket handle specified" },
     { WSAEDESTADDRREQ, "Missing destination address" },
-    { WSAEMSGSIZE, "Message too big" },
-    //{ WSAEPROTOTYPE
+    { WSAEMSGSIZE, "Message too long" },
+    { WSAEPROTOTYPE, "Protocol wrong type for socket", },
     { WSAENOPROTOOPT, "Option not supported by protocol" },
-    { WSAEPROTONOSUPPORT, "Protocol not support" },
-    //WSAESOCKTNOSUPPORT
+    { WSAEPROTONOSUPPORT, "Protocol not supported" },
+    { WSAESOCKTNOSUPPORT, "Socket type not supported" },
     { WSAEOPNOTSUPP, "Operation not supported" },
     { WSAEPFNOSUPPORT, "Protocol family not supported" },
-    { WSAEAFNOSUPPORT, "Address family not supported" },
+    { WSAEAFNOSUPPORT, "Address family not supported by protocol family" },
     { WSAEADDRINUSE, "Address already in use" },
-    { WSAEADDRNOTAVAIL, "Address not available" },
-    { WSAENETDOWN, "Network down" },
+    { WSAEADDRNOTAVAIL, "Cannot assign requested address" },
+    { WSAENETDOWN, "Network is down" },
     { WSAENETUNREACH, "Network unreachable" },
-    //WSAENETRESET
-    { WSAECONNABORTED, "Connection aborted" },
+    { WSAENETRESET, "Network dropped connection on reset" },
+    { WSAECONNABORTED, "Software caused connection abort" },
     { WSAECONNRESET, "Connection reset by peer" },
-    { WSAENOBUFS, "Not enough memory" },
-    { WSAEISCONN, "Socket already connected" },
-    { WSAENOTCONN, "Connection required first" },
-    { WSAESHUTDOWN, "Connection shutdown" },
+    { WSAENOBUFS, "No buffer space available (not enough memory)" },
+    { WSAEISCONN, "Socket is already connected" },
+    { WSAENOTCONN, "Socket is not connected" },
+    { WSAESHUTDOWN, "Cannot send after socket shutdown" },
     { WSAETOOMANYREFS, "Too many references" },
     { WSAETIMEDOUT, "Connection timed out" },
     { WSAECONNREFUSED, "Connection refused by peer" },
-    //WSAELOOP
-    //WSAENAMETOOLONG
-    { WSAEHOSTDOWN, "Remote host down" },
-    { WSAEHOSTUNREACH, "Remote host unreachable" },
-    //WSAENOTEMPTY
-    //WSAEPROCLIM
-    //WSAEUSERS
-    //WSAEDQUOT
-    //WSAESTALE
-    //WSAEREMOTE
-    //WSAEDISCON
-    { WSASYSNOTREADY, "Network stack not ready" },
-    { WSAVERNOTSUPPORTED, "Network stack version not supported" },
+    { WSAELOOP, "Cannot translate name" },
+    { WSAENAMETOOLONG, "Name too long" },
+    { WSAEHOSTDOWN, "Remote host is down" },
+    { WSAEHOSTUNREACH, "No route to host (unreachable)" },
+    { WSAENOTEMPTY, "Directory not empty" },
+    { WSAEPROCLIM, "Too many processes" },
+    { WSAEUSERS, "User quota exceeded" },
+    { WSAEDQUOT, "Disk quota exceeded" },
+    { WSAESTALE, "Stale file handle reference" },
+    { WSAEREMOTE, "Item is remote", },
+    { WSASYSNOTREADY, "Network subsystem is unavailable (network stack not ready)" },
+    { WSAVERNOTSUPPORTED, "Winsock.dll version out of range (network stack version not supported" },
     { WSANOTINITIALISED, "Network not initialized" },
-    { WSAHOST_NOT_FOUND, "Hostname not found" },
-    { WSATRY_AGAIN, "Temporary hostname error" },
+    { WSAEDISCON, "Graceful shutdown in progress" },
+    { WSAENOMORE, "No more results" },
+    { WSAECANCELLED, "Call has been cancelled" },
+    { WSAEINVALIDPROCTABLE, "Procedure call table is invalid" },
+    { WSAEINVALIDPROVIDER, "Service provider is invalid" },
+    { WSAEPROVIDERFAILEDINIT, "Service provider failed to initialize" },
+    { WSASYSCALLFAILURE, "System call failure" },
+    { WSASERVICE_NOT_FOUND, "Service not found" },
+    { WSATYPE_NOT_FOUND, "Class type not found" },
+    { WSA_E_NO_MORE, "No more results" },
+    { WSA_E_CANCELLED, "Call was cancelled" },
+    { WSAEREFUSED, "Database query was refused" },
+    { WSAHOST_NOT_FOUND, "Host not found" },
+    { WSATRY_AGAIN, "Nonauthoritative host not found (temporary hostname error)" },
     { WSANO_RECOVERY, "Non-recoverable hostname error" },
-    /* Winsock2 and QoS error are codes missing,
-       I'm too bored, and they "never" occur. */
+    { WSANO_DATA, "Valid name, no data record of requested type" },
+    { WSA_QOS_RECEIVERS, "QOS receivers" },
+    { WSA_QOS_SENDERS, "QOS senders" },
+    { WSA_QOS_NO_SENDERS, "No QOS senders" },
+    { WSA_QOS_NO_RECEIVERS, "QOS no receivers" },
+    { WSA_QOS_REQUEST_CONFIRMED, "QOS request confirmed" },
+    { WSA_QOS_ADMISSION_FAILURE, "QOS admission error" },
+    { WSA_QOS_POLICY_FAILURE, "QOS policy failure" },
+    { WSA_QOS_BAD_STYLE, "QOS bad style" },
+    { WSA_QOS_BAD_OBJECT, "QOS bad object" },
+    { WSA_QOS_TRAFFIC_CTRL_ERROR, "QOS traffic control error" },
+    { WSA_QOS_GENERIC_ERROR, "QOS generic error" },
+    { WSA_QOS_ESERVICETYPE, "QOS service type error" },
+    { WSA_QOS_EFLOWSPEC, "QOS flowspec error" },
+    { WSA_QOS_EPROVSPECBUF, "Invalid QOS provider buffer" },
+    { WSA_QOS_EFILTERSTYLE, "Invalid QOS filter style" },
+    { WSA_QOS_EFILTERTYPE, "Invalid QOS filter type" },
+    { WSA_QOS_EFILTERCOUNT, "Incorrect QOS filter count" },
+    { WSA_QOS_EOBJLENGTH, "Invalid QOS object length" },
+    { WSA_QOS_EFLOWCOUNT, "Incorrect QOS flow count" },
+    { WSA_QOS_EUNKNOWNPSOBJ, "Unrecognized QOS object" },
+    { WSA_QOS_EPOLICYOBJ, "Invalid QOS policy object" },
+    { WSA_QOS_EFLOWDESC, "Invalid QOS flow descriptor" },
+    { WSA_QOS_EPSFLOWSPEC, "Invalid QOS provider-specific flowspec" },
+    { WSA_QOS_EPSFILTERSPEC, "Invalid QOS provider-specific filterspec" },
+    { WSA_QOS_ESDMODEOBJ, "Invalid QOS shape discard mode object" },
+    { WSA_QOS_ESHAPERATEOBJ, "Invalid QOS shaping rate object" },
+    { WSA_QOS_RESERVED_PETYPE, "Reserved policy QOS element type" },
     { 0, NULL }
+    /* Winsock2 error codes are missing, they "never" occur */
 };