* configure.in, configure, src/config.h.in, src/dvbpsi.h, misc/gen_crc.c:...

  * configure.in, configure, src/config.h.in, src/dvbpsi.h, misc/gen_crc.c: int types detection. It fixes (or should fix) solaris and mingw port.

aclocal.m4

@@ -154,6 +154,8 @@ AC_REQUIRE([AC_PROG_CC])dnl
 AC_REQUIRE([AC_PROG_LD])dnl
 AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
 AC_REQUIRE([AC_PROG_NM])dnl
+AC_REQUIRE([LT_AC_PROG_SED])dnl
+
 AC_REQUIRE([AC_PROG_LN_S])dnl
 AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
 AC_REQUIRE([AC_OBJEXT])dnl
@@ -1051,11 +1053,7 @@ AC_CACHE_VAL(lt_cv_prog_cc_pic,
     sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
       lt_cv_prog_cc_pic='-KPIC'
       lt_cv_prog_cc_static='-Bstatic'
-      if test "x$host_vendor" = xsni; then
-	lt_cv_prog_cc_wl='-LD'
-      else
-	lt_cv_prog_cc_wl='-Wl,'
-      fi
+      lt_cv_prog_cc_wl='-Wl,'
       ;;
 
     uts4*)
@@ -1420,7 +1418,7 @@ EOF
     # If the export-symbols file already is a .def file (1st line
     # is EXPORTS), use it as is.
     # If DATA tags from a recent dlltool are present, honour them!
-    archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
+    archive_expsym_cmds='if test "x`sed 1q $export_symbols`" = xEXPORTS; then
 	cp $export_symbols $output_objdir/$soname-def;
       else
 	echo EXPORTS > $output_objdir/$soname-def;
@@ -1429,6 +1427,7 @@ EOF
 	 set dummy \$symbol;
 	 case \[$]# in
 	   2) echo "   \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
+	   4) echo "   \[$]2 \[$]3 \[$]4 ; " >> $output_objdir/$soname-def; _lt_hint=`expr \$_lt_hint - 1`;;
 	   *) echo "     \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
 	 esac;
 	 _lt_hint=`expr 1 + \$_lt_hint`;
@@ -1868,13 +1867,23 @@ EOF
     ;;
 
   sysv4)
-    if test "x$host_vendor" = xsno; then
-      archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=yes # is this really true???
-    else
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-    fi
+    case $host_vendor in
+      sni)
+        archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+        hardcode_direct=yes # is this really true???
+        ;;
+      siemens)
+        ## LD is ld it makes a PLAMLIB
+        ## CC just makes a GrossModule.
+        archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+        reload_cmds='$CC -r -o $output$reload_objs'
+        hardcode_direct=no
+        ;;
+      motorola)
+        archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+        hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+        ;;
+    esac
     runpath_var='LD_RUN_PATH'
     hardcode_shlibpath_var=no
     ;;
@@ -2297,7 +2306,6 @@ os2*)
 osf3* | osf4* | osf5*)
   version_type=osf
   need_version=no
-  need_lib_prefix=no
   soname_spec='${libname}${release}.so'
   library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
   shlibpath_var=LD_LIBRARY_PATH
@@ -2345,6 +2353,12 @@ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
   case $host_vendor in
     sni)
       shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
       ;;
     motorola)
       need_lib_prefix=no
@@ -2499,7 +2513,7 @@ if test -f "$ltmain"; then
   # Now quote all the things that may contain metacharacters while being
   # careful not to overquote the AC_SUBSTed values.  We take copies of the
   # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS \
+  for var in echo old_CC old_CFLAGS SED \
     AR AR_FLAGS CC LD LN_S NM SHELL \
     reload_flag reload_cmds wl \
     pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
@@ -2561,8 +2575,11 @@ if test -f "$ltmain"; then
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
+# A sed that does not truncate output.
+SED=$lt_SED
+
 # Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="sed -e s/^X//"
+Xsed="${SED} -e s/^X//"
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
@@ -3421,7 +3438,13 @@ irix5* | irix6* | nonstopux*)
 
 # This must be Linux ELF.
 linux-gnu*)
-  lt_cv_deplibs_check_method=pass_all
+  case $host_cpu in
+  alpha* | hppa* | i*86 | mips | mipsel | powerpc* | sparc* | ia64*)
+    lt_cv_deplibs_check_method=pass_all ;;
+  *)
+    # glibc up to 2.1.1 does not perform some relocations on ARM
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
+  esac
   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
   ;;
 
@@ -3487,6 +3510,9 @@ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
     lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
     lt_cv_file_magic_test_file=/lib/libc.so
     ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
   esac
   ;;
 esac
@@ -3620,3 +3646,92 @@ AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
 # This is just to silence aclocal about the macro not being used
 ifelse([AC_DISABLE_FAST_INSTALL])
 
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+# LT_AC_PROG_SED
+# --------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible.  Prefer GNU sed if found.
+AC_DEFUN([LT_AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_executable_p="test -f"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+        _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext"
+      fi
+    done
+  done
+done
+
+  # Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+  trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+: ${TMPDIR=/tmp}
+{
+  tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` &&
+  test -n "$tmp" && test -d "$tmp"
+}  ||
+{
+  tmp=$TMPDIR/sed$$-$RANDOM
+  (umask 077 && mkdir $tmp)
+} ||
+{
+   echo "$me: cannot create a temporary directory in $TMPDIR" >&2
+   { (exit 1); exit 1; }
+}
+  _max=0
+  _count=0
+  # Add /usr/xpg4/bin/sed as it is typically found on Solaris
+  # along with /bin/sed that truncates output.
+  for _sed in $_sed_list /usr/xpg4/bin/sed; do
+    test ! -f ${_sed} && break
+    cat /dev/null > "$tmp/sed.in"
+    _count=0
+    echo ${ECHO_N-$ac_n} "0123456789${ECHO_C-$ac_c}" >"$tmp/sed.in"
+    # Check for GNU sed and select it if it is found.
+    if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then
+      lt_cv_path_SED=${_sed}
+      break;
+    fi
+    while true; do
+      cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp"
+      mv "$tmp/sed.tmp" "$tmp/sed.in"
+      cp "$tmp/sed.in" "$tmp/sed.nl"
+      echo >>"$tmp/sed.nl"
+      ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break
+      cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break
+      # 40000 chars as input seems more than enough
+      test $_count -gt 10 && break
+      _count=`expr $_count + 1`
+      if test $_count -gt $_max; then
+        _max=$_count
+        lt_cv_path_SED=$_sed
+      fi
+    done
+  done
+  rm -rf "$tmp"
+])
+if test "X$SED" != "X"; then
+  lt_cv_path_SED=$SED
+else
+  SED=$lt_cv_path_SED
+fi
+AC_MSG_RESULT([$SED])
+])
+

configure.in

@@ -51,6 +51,8 @@ else
   CFLAGS="${CFLAGS} -O2"
 fi
 
+dnl Check for headers
+AC_CHECK_HEADERS(stdint.h inttypes.h)
 
 AC_OUTPUT([Makefile src/Makefile src/tables/Makefile src/descriptors/Makefile examples/Makefile misc/Makefile doc/Makefile debian/Makefile])
 

misc/gen_crc.c

@@ -2,7 +2,7 @@
  * gen_crc.c: CRC_32 table generator
  *----------------------------------------------------------------------------
  * (c)2001-2002 VideoLAN
- * $Id: gen_crc.c,v 1.1 2002/01/07 18:30:35 bozo Exp $
+ * $Id: gen_crc.c,v 1.2 2002/06/02 23:04:08 bozo Exp $
  *
  * Authors: Arnaud de Bossoreille de Ribou <bozo@via.ecp.fr>
  *
@@ -25,8 +25,14 @@
  *****************************************************************************/
 
 
+#include "config.h"
+
 #include <stdio.h>
+#if defined(HAVE_INTTYPES_H)
 #include <inttypes.h>
+#elif defined(HAVE_STDINT_H)
+#include <stdint.h>
+#endif
 
 
 /*****************************************************************************

src/config.h.in

@@ -6,6 +6,12 @@
 /* Define if you have the <dlfcn.h> header file.  */
 #undef HAVE_DLFCN_H
 
+/* Define if you have the <inttypes.h> header file.  */
+#undef HAVE_INTTYPES_H
+
+/* Define if you have the <stdint.h> header file.  */
+#undef HAVE_STDINT_H
+
 /* Name of package */
 #undef PACKAGE
 

src/dvbpsi.h

 /*****************************************************************************
  * dvbpsi.h
  * (c)2001-2002 VideoLAN
- * $Id: dvbpsi.h,v 1.5 2002/03/27 20:02:43 bozo Exp $
+ * $Id: dvbpsi.h,v 1.6 2002/06/02 23:04:08 bozo Exp $
  *
  * Authors: Arnaud de Bossoreille de Ribou <bozo@via.ecp.fr>
  *
@@ -34,7 +34,11 @@
 #define _DVBPSI_DVBPSI_H_
 
 
+#if defined(HAVE_INTTYPES_H)
 #include <inttypes.h>
+#elif defined(HAVE_STDINT_H)
+#include <stdint.h>
+#endif
 
 #ifdef __cplusplus
 extern "C" {