- 25 Nov, 2005 15 commits
-
-
Trond Myklebust authored
When caching locks due to holding a file delegation, we must always check against local locks before sending anything to the server. Signed-off-by:Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: -
-
-
David Gibson authored
Blah. The patch [0] I recently sent fixing errors with in_hugepage_area() and prepare_hugepage_range() for powerpc itself has an off-by-one bug. Furthermore, the related functions touches_hugepage_*_range() and within_hugepage_*_range() are also buggy. Some of the bugs, like those addressed in [0] originated with commit 7d24f0b8 where we tweaked the semantics of where hugepages are allowed. Other bugs have been there essentially forever, and are due to the undefined behaviour of '<<' with shift counts greater than the type width (LOW_ESID_MASK could return non-zero for high ranges with the right congruences). The good news is that I now have a testsuite which should pick up things like this if they creep in again. [0] "powerpc-fix-for-hugepage-areas-straddling-4gb-boundary" Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
-
Stephen Rothwell authored
With the removal of include/asm-powerpc, we no longer need arch/powerpc/include/asm for the 64 bit build. We also do not need -Iarch/powerpc for the 64 bit build either. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Nathan Scott authored
SGI-PV: 946205 SGI-Modid: xfs-linux-melb:xfs-kern:24567a Signed-off-by:Nathan Scott <nathans@sgi.com>
-
Nathan Scott authored
SGI-PV: 941645 SGI-Modid: xfs-linux-melb:xfs-kern:24566a Signed-off-by: -
Felix Blyakher authored
its queue of IO completion callbacks, thus creating the deadlock between umount and xfslogd. Breaking the loop solves the problem. SGI-PV: 943821 SGI-Modid: xfs-linux-melb:xfs-kern:202363a Signed-off-by:
Felix Blyakher <felixb@sgi.com> Signed-off-by:
-
Nathan Scott authored
direct write. SGI-PV: 944820 SGI-Modid: xfs-linux-melb:xfs-kern:24351a Signed-off-by: -
Christoph Hellwig authored
SGI-PV: 945483 SGI-Modid: xfs-linux-melb:xfs-kern:201884a Signed-off-by:
Christoph Hellwig <hch@sgi.com> Signed-off-by:
-
Eric Sandeen authored
SGI-PV: 945311 SGI-Modid: xfs-linux-melb:xfs-kern:201708a Signed-off-by:
Eric Sandeen <sandeen@sgi.com> Signed-off-by:
-
Linus Torvalds authored
-
Jasper Spaans authored
This code fixes a tiny problem with the recent fbcon rotation changes: fb_prepare_logo doesn't check the return value of fb_find_logo and that causes a crash for my while booting. Obvious & working & tested fix is here. Signed-off-by:
Jasper Spaans <jasper@vs19.net> Acked-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
- 24 Nov, 2005 25 commits
-
-
-
Nicolas Kaiser authored
remove redundant include Signed-off-by:
Nicolas Kaiser <nikai@nikai.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc warning in linux/usb.h. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
David Hrdeman authored
On Wed, Nov 16, 2005 at 06:34:24PM -0800, Pete Zaitcev wrote: >On Wed, 16 Nov 2005 23:52:32 +0100, David Hrdeman <david@2gen.com> wrote: >> usb-storage: waiting for device to settle before scanning >> Vendor: I0MEGA Model: UMni1GB*IOM2K4 Rev: 1.01 >> Type: Direct-Access ANSI SCSI revision: 02 >> SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB) >> sda: Write Protect is off >> sda: Mode Sense: 00 00 00 00 >> sda: assuming drive cache: write through >> ioctl_internal_command: <8 0 0 0> return code = 8000002 >> : Current: sense key=0x0 >> ASC=0x0 ASCQ=0x0 >> SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB) > >I think it's harmless. I saw things like that, and initially I plugged >them with workarounds like this: Thanks for the pointer, and yes, it is harmless, but it floods the console with the messages which hides other (potentially important) messages...following your example I've made a patch which fixes the problem. Signed-off-by:
David Hrdeman <david@2gen.com> Signed-off-by:
-
David Brownell authored
This should fix a suspend/resume issues that appear with OHCI on some PPC hardware. The PCI layer should doesn't have the hooks needed for such ASIC-specific hooks (in this case, software clock gating), so this moves the code to do that into hcd-pci.c ... where it can be done after the relevant PCI PM state transition (to/from D3). Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
David Brownell authored
Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by:
-
David Brownell authored
This cleans up the recent updates to EHCI PCI support: - Gets rid of checks for "is this a PCI device", they're no longer needed since this is now all PCI-only code. - Reduce log spamming: MWI is only interesting in the atypical case that it can actually be used. - Whitespace cleanup, as appropriate for a new file with no other pending patches. So other than that minor logging change, no functional updates. Signed-off-by: -
David Brownell authored
This fixes some bugs in EHCI suspend/resume that joined us over the past few releases (as usbcore, PCI, pmcore, and other components evolved): - Removes suspend and resume recursion from the EHCI driver, getting rid of the USB_SUSPEND special casing. - Updates the wakeup mechanism to work again; there's a newish usbcore call it needs to use. - Provide simpler tests for "do we need to restart from scratch", to address another case where PCI Vaux was lost. (In this case it was restoring a swsusp snapshot, but there could be others.) Un-exports a symbol that was temporarily exported. A notable change from previous version is that this doesn't move the spinlock init, so there's still a resume/reinit path bug. Signed-off-by: -
Ian Abbott authored
This patch adds two new devices to the ftdi_sio driver's device ID table. The device IDs were supplied by Stefan Nies of KOBIL Systems for two of their devices using the FTDI chip. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Damian Wrobel authored
This patch solves the following problem I've already discovered on the latest 2.6.15-rc1-git1 kernel: Nov 13 07:37:28 wrobel kernel: Bad page state at free_hot_cold_page (in process 'motion', page c164e020) Nov 13 07:37:28 wrobel kernel: flags:0x40000400 mapping:00000000 mapcount:0 count:0 Nov 13 07:37:28 wrobel kernel: Backtrace: Nov 13 07:37:28 wrobel kernel: [<c0146d86>] bad_page+0x85/0xbe Nov 13 07:37:28 wrobel kernel: [<c0147629>] free_hot_cold_page+0x54/0x129 Nov 13 07:37:28 wrobel kernel: [<c01598c6>] __vunmap+0xa9/0xfe Nov 13 07:37:28 wrobel kernel: [<c0154114>] vmalloc_to_page+0x34/0x55 Nov 13 07:37:28 wrobel kernel: [<c0159942>] vfree+0x27/0x35 Nov 13 07:37:28 wrobel kernel: [<f8a20292>] sn9c102_release_buffers+0x30/0x3f [sn9c102] Nov 13 07:37:28 wrobel kernel: [<f8a231c2>] sn9c102_release+0x37/0xeb [sn9c102] Nov 13 07:37:28 wrobel kernel: [<c0163e74>] __fput+0xa9/0x1aa Nov 13 07:37:28 wrobel kernel: [<c01624f7>] filp_close+0x49/0x6d Nov 13 07:37:30 wrobel kernel: [<c016258f>] sys_close+0x74/0x95 Nov 13 07:37:30 wrobel kernel: [<c0102ef9>] syscall_call+0x7/0xb Nov 13 07:37:31 wrobel kernel: Trying to fix it up, but a reboot is needed Signed-off-by:
Damian Wrobel <dwrobel@ertel.com.pl> Signed-off-by:
-
Daniel Marjamäki authored
The DBG() call where updated with the appropriate KERN_* symbol. Signed-off-by:
Daniel Marjamki <daniel.marjamaki@comhem.se> Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc warning in pci/pci-acpi.c. Signed-off-by:
-
Rajesh Shah authored
When attempting to hotadd a PCI card with a bridge on it, I saw the kernel reporting resource collision errors even when there were really no collisions. The problem is that the code doesn't skip over "invalid" resources with their resource type flag not set. Others have reported similar problems at boot time and for non-bridge PCI card hotplug too, where the code flags a resource collision for disabled ROMs. This patch fixes both problems. Signed-off-by:
Rajesh Shah <rajesh.shah@intel.com> Signed-off-by:
-
Rajesh Shah authored
Per the PCI Express spec, the power-fault-detected bit in the slot status register can be set anytime hardware detects a power fault, regardless of whether the slot has a device populated in it or not. This bit is sticky and must be explicitly cleared. This patch is needed to allow hot-add after such a power fault has been detected. Signed-off-by:
-
Daniel Marjamäkia authored
Modified common.c so it's using the appropriate KERN_* in printk() calls. Signed-off-by:
-
Eugeniy Meshcheryakov authored
Trivial patch to report both hdaps axises to the joystick device, not just the X axis. Signed-off-by:
Robert Love <rml@novell.com> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Jean Delvare authored
Fix a bug where setting the low fan speed limits will not work if no data was ever read through the sysfs interface and the fan clock dividers have not been explicitely set yet either. The reason is that data->fan_div[nr] may currently be used before it is initialized from the chip register values. The fix is to explicitely initialize data->fan_div[nr] before using it. Bug reported, and fix tested, by Nicolas Mailhot. Signed-off-by:
-
Jean Delvare authored
Fix the lm78 VID reading, which I accidentally broke while making this driver use the common vid_from_reg function rather than reimplementing its own in 2.6.14-rc1. I'm not proud of it, trust me. Signed-off-by:
-
Yuan Mu authored
Add SENSORS_LIMIT in store VCore limit functions. This fixes a potential u8 overflow on out-of-range user input. Signed-off-by:
-
Josh Boyer authored
Greg requested a patch to update MAINTAINERS with more SCM entries. The patch below is what I've found so far. Signed-off-by:
Josh Boyer <jwboyer@gmail.com> Signed-off-by:
-
Jody McIntyre authored
Pavel Machek points out that for git repos, what we include is not actually a URL. It is undesirable to use a URL since git repos can be accessed in many different ways. Signed-off-by:
Jody McIntyre <scjody@steamballoon.com> Signed-off-by:
-
Josh Boyer authored
Here's the MTD one. More later as I find them. Signed-off-by:
-
Alan Stern authored
This patch (as603) makes a few small fixes to the driver core: Change spin_lock_irq for a klist lock to spin_lock; Fix reference count leaks; Minor spelling and formatting changes. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Acked-by Patrick Mochel <mochel@digitalimplant.org> Signed-off-by:
-
Olaf Rempel authored
We must recompute bridge features everytime the list of underlying devices changes, or we might end up with features that are not supported by all devices (eg. NETIF_F_TSO) This patch adds the missing recompute when adding a device to the bridge. Signed-off-by:
Olaf Rempel <razzor@kopf-tisch.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Benoit Boissinot authored
net/ipv4/netfilter/ip_conntrack_netlink.c: In function 'ctnetlink_dump_table': net/ipv4/netfilter/ip_conntrack_netlink.c:409: warning: implicit declaration of function 'local_bh_disable' net/ipv4/netfilter/ip_conntrack_netlink.c:427: warning: implicit declaration of function 'local_bh_enable' Signed-off-by:
Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
