- 23 Sep, 2009 40 commits
-
-
Imre Deak authored
- value and register offset was swapped in a dispc write - DISPC_CONTROL register was used instead of DISPC_SYSCONFIG - FIFO size bit field had incorrect length for OMAP3 Fixed-by:
arun <arunedarath@mistralsolutions.com> Fixed-by:
Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com> Fixed-by:
Andrzej Zaborowski <balrog@zabor.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Imre Deak <imre.deak@nokia.com> Acked-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Imre Deak authored
Signed-off-by:
-
Rodrigo Vivi authored
The LCD controller (EPSON S1D13744) supports rotation (0, 90, 180 and 270 degrees) on hardware just setting the bits 0 and 1 of 0x28 register (LCD Panel Configuration Register). Now it is possible to use this caps only setting the angle degree on var rotate of fb_var_screeninfo using the FBIOPUT_VSCREENINFO ioctl. Fixed-by:
Siarhei Siamashka <siarhei.siamashka@nokia.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@openbossa.org> Signed-off-by:
-
Stanley.Miao authored
Add glue to control the OMAP_LDP LCD as a frame buffer device using the existing dispc.c driver under omapfb. Patch updated for mainline kernel. Note that the drivers/video/omap should be updated to pass omap_lcd_config in platform_data. The patch should also be updated to compile if twl4030 is not selected, and eventually to use the regulator framework. Fixed-by:
Jarkko Nikula <jarkko.nikula@gmail.com> Fixed-by:
Stanley.Miao <stanley.miao@windriver.com> Signed-off-by:
-
Steve Sakoman authored
Signed-off-by:
Steve Sakoman <steve@sakoman.com> Signed-off-by:
-
Koen Kooi authored
The default resolution is 1024x768@24bit This version addresses the comments from Felipe Balbi adn Arun Edarath Fixed-by:
Felipe Contreras <felipe.contreras@gmail.com> Fixed-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Koen Kooi <koen@openembedded.org> Signed-off-by:
-
Steve Sakoman authored
Add LCD support for OMAP3 EVM Backlight support by Arun C <arunedarath@mistralsolutions.com> Fixed-by:
Syed Mohammed Khasim <khasim@ti.com> Signed-off-by:
-
Kevin Hilman authored
The 3430SDP uses the same panel as the 2430SDP. The main difference are in the GPIO lines used for panel enable and backlight, and the VAUX register/commands sent to the TWL4030 power subsystem. Also, some misc. whitespace cleanups. Fixed-by:
Kevin Hilman <khilman@mvsita.com> Signed-off-by:
-
arun c authored
omap2evm LCD supports VGA and QVGA resolution, by default its in VGA mode. Fixed-by:
-
Hunyue Yau authored
Add glue to control the 2430SDP LCD as a frame buffer device using the existing dispc.c driver under omapfb. Fixed-by:
Kevin Hilman <khilman@mvista.com> Fixed-by:
Sergio Aguirre <saaguirre@ti.com> Fixed-by:
Francisco Alecrim <francisco.alecrim@indt.org.br> Fixed-by:
Hunyue Yau <hyau@mvista.com> Signed-off-by:
-
Jonathan McDowell authored
This is an updated version of the LCD driver for the Amstrad Delta to take into account the recent changes to the omapfb infrastructure. The Delta features a 480x320 12 bit DSTN panel. Signed-off-by:
Jonathan McDowell <noodles@earth.li> Signed-off-by:
-
Imre Deak authored
Fixed-by:
Mike Wege <ext-mike.wege@nokia.com> Fixed-by:
Arnaud Patard <arnaud.patard@rtp-net.org> Fixed-by:
Timo Savola <tsavola@movial.fi> Fixed-by:
Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Fixed-by:
Trilok Soni <soni.trilok@gmail.com> Signed-off-by:
Imre Deak <imre.deak@solidboot.com> Signed-off-by:
Juha Yrjola <juha.yrjola@solidboot.com> Acked-by:
-
Kyungmin Park authored
Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Daniel Glöckner authored
Many gpio chips allow to generate interrupts when the value of a pin changes. This patch gives usermode application the opportunity to make use of this feature by calling poll(2) on the /sys/class/gpio/gpioN/value sysfs file. The edge to trigger can be set in the edge file in the same directory. Possible values are "none", "rising", "falling", and "both". Using level triggers is not possible with current sysfs since nothing changes the GPIO value (and the IRQ keeps triggering). Edge triggering will "just work". Note that if there was an event between read() and poll(), the poll() returns immediately. Also note that this version only supports true GPIO interrupts. Some later patch might be able to synthesize this behavior by timer-driven polling; some systems seem to need that. [dbrownell@users.sourceforge.net: align ids to 16 bit ids; whitespace] Signed-off-by:
Daniel Glöckner <dg@emlix.com> Signed-off-by:
-
H Hartley Sweeten authored
Drivers should be including <linux/gpio.h> not <asm/gpio.h>. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Alek Du authored
MAX7315 is pin and software compatible with PCA9534, so add it to the I2C device ID table of pca953x driver. http://www.datasheetcatalog.org/datasheet/maxim/MAX7315.pdfSigned-off-by:
Alek Du <alek.du@intel.com> Acked-by:
David Brownell <david-b@pacbell.net> Signed-off-by:
-
Alek Du authored
The Langwell chip is the IO hub for Intel Moorestown platform which has a 64-pin gpio block device inside. It is exposed as a dedicated PCI device. We use it to control outside peripheral as well as to do IRQ demuxing. The gpio block uses MSI to send level type interrupt to IOAPIC. Signed-off-by:
-
Marek Vasut authored
Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Brownell <david-b@pacbell.net> Cc: Samuel Ortiz <sameo@openedhand.com> Signed-off-by:
-
Richard Röjfors authored
A GPIO driver for the Freescale MC33880 High/Low side switch Signed-off-by:
Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Jani Nikula authored
Commit 926b663c (gpiolib: allow GPIOs to be named) already provides naming on the chip level. This patch provides more flexibility by allowing multiple names where ever in sysfs on a per GPIO basis. Adapted from David Brownell's comments on a similar concept: http://lkml.org/lkml/2009/4/20/203. [randy.dunlap@oracle.com: fix build for CONFIG_GENERIC_GPIO=n] Signed-off-by:
Jani Nikula <ext-jani.1.nikula@nokia.com> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Matthew Garrett authored
CONFIG_RTC_HCTOSYS allows the kernel to read the system time from the RTC at boot and resume, avoiding the need for userspace to do so. Unfortunately userspace currently has no way to know whether this configuration option is enabled and thus cannot sensibly choose whether to run hwclock itself or not. Add a hctosys sysfs attribute which indicates whether a given RTC set the system clock. Signed-off-by:
Matthew Garrett <mjg@redhat.com> Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Matthew Garrett authored
The sysfs interface to the RTC class drivers is currently undocumented. Add some basic documentation defining the semantics of the fields. Signed-off-by:
-
David Brownell authored
Fix two new-ish runtime warnings in the at91rm9200 (etc) RTC: Platform driver 'at91_rtc' needs updating - please use dev_pm_ops ... by just switching IRQ 1/at91_rtc: IRQF_DISABLED is not guaranteed on shared IRQs ... no longer needed now that rtc_update_irq() changed Signed-off-by:
-
Julia Lawall authored
Error handling code following a kzalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Julia Lawall authored
This code is not executed before ds1307->rtc has been successfully initialized to the result of calling rtc_device_register. Thus the test that ds1307->rtc is not NULL is always true. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @match exists@ expression x, E; statement S1, S2; @@ x = rtc_device_register(...) ... when != x = E ( * if (x == NULL || ...) S1 else S2 | * if (x == NULL && ...) S1 else S2 ) // </smpl> Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Daniel Ribeiro authored
[ospite@studenti.unina.it: get pcap data from the parent device] Signed-off-by:
guiming zhuo <gmzhuo@gmail.com> Signed-off-by:
Daniel Ribeiro <drwyrm@gmail.com> Acked-by:
Antonio Ospite <ospite@studenti.unina.it> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Alessandro Zummo authored
Signed-off-by:
-
dmitry pervushin authored
Add support for RTC on the Freescale STMP37xx/378x platform. Signed-off-by:
dmitry pervushin <dpervushin@embeddedalley.com> Signed-off-by:
-
Michael Hennerich authored
The Blackfin RTC IRQ is an internal interrupt, so it makes no sense to have it be shared. Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Linus Walleij authored
This adds a driver for the RTC COH 901 331 found in the ST-Ericsson U300 series mobile platforms to the RTC subsystem. It integrates to the ARM kernel support recently added to RMKs ARM tree and will be enabled in the U300 defconfig in due time. Signed-off-by:
Linus Walleij <linus.walleij@stericsson.com> Signed-off-by:
-
Daniel Mack authored
This adds a driver for Freescale's MXC internal real time clock modules. The code is taken from Freescale's BSPs, but modified to fit the current kernel coding mechanisms. Also, the PMIC external clock function was removed for now to not add dead bits and keep the code as simple as possible. [akpm@linux-foundation.org: make PIE_BIT_DEF[] static] Signed-off-by:
Daniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Chris Verges authored
Signed-off: Chris Verges <chrisv@cyberswitching.com> Cc: Christian Pellegrin <chripell@fsfe.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Chris Verges authored
Add support for the Philips/NXP PCF2123 RTC. Signed-off: Chris Verges <chrisv@cyberswitching.com> Tested-by:
Chris Verges <chrisv@cyberswitching.com> Signed-off: Christian Pellegrin <chripell@fsfe.org> Tested-by:
Christian Pellegrin <chripell@fsfe.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
David Brownell authored
Support two new half-duplex SPI implementation restrictions, for links that talk to TX-only or RX-only devices. (Existing half-duplex flavors support both transfer directions, just not at the same time.) Move spi_async() into the spi.c core, and stop inlining it. Then make that function perform error checks and reject messages that demand more than the underlying controller can support. Based on a patch from Marek Szyprowski which did this only for the bitbanged GPIO driver. Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Syed Rafiuddin authored
tAdd adds McSPI support for OMAP4430 SDP platform. All the base addresses are changed between OMAP1/2/3 and OMAP4. The fields of the resource structures are filled at runtime to have McSPI support on OMAP4. Signed-off-by:
Syed Rafiuddin <rafiuddin.syed@ti.com> Acked-by:
Kevin Hilman <khilman@deeprootsystems.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by:
-
Tero Kristo authored
Previous restore was lazy and only restored CHxCONF when it was needed by a specific chip select. This could cause occasional errors on an SPI bus where multiple chip selects are in use. Signed-off-by:
Tero Kristo <tero.kristo@nokia.com> Signed-off-by:
-
Hemanth V authored
Add context save/restore feature to McSPI driver. Signed-off-by:
Hemanth V <hemanthv@ti.com> Reviewed-by:
Aaro Koskinen <Aaro.Koskinen@nokia.com> Signed-off-by:
-
dmitry pervushin authored
Add SPI driver for Freescale STMP 3xxx-based boards [dbrownell@users.sourceforge.net: cleanup sequence, spi_unregister_master] Signed-off-by:
-
