- 21 Jul, 2008 40 commits
-
-
Geert Uytterhoeven authored
On recent kernels, I get the following error when using an initrd: | initrd overwritten (0x00b78000 < 0x07668000) - disabling it. My Amiga 4000 has 12 MiB of RAM at physical address 0x07400000 (virtual 0x00000000). The initrd is located at the end of RAM: 0x00b78000 - 0x00c00000 (virtual). The overwrite test compares the (virtual) initrd location to the (physical) first available memory location, which fails. This patch converts initrd_start to a page frame number, so it can safely be compared with min_low_pfn. Before the introduction of discontiguous memory support on m68k (12d810c1), min_low_pfn was just left untouched by the m68k-specific code (zero, I guess), and everything worked fine. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Akinobu Mita authored
dio_bus_match() can use dio_match_device(). Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Julia Lawall authored
As noted by Akinobu Mita in patch b1fceac2, alloc_bootmem and related functions never return NULL and always return a zeroed region of memory. Thus a NULL test or memset after calls to these functions is unnecessary. This was fixed using the following semantic patch. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; statement S; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...) .. when != E ( - BUG_ON (E == NULL); | - if (E == NULL) S ) @@ expression E,E1; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...) .. when != E - memset(E,0,E1); // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
As noted by Akinobu Mita in patch b1fceac2, alloc_bootmem and related functions never return NULL and always return a zeroed region of memory. Thus a NULL test or memset after calls to these functions is unnecessary. This was fixed using the following semantic patch. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; statement S; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...) .. when != E ( - BUG_ON (E == NULL); | - if (E == NULL) S ) @@ expression E,E1; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...) .. when != E - memset(E,0,E1); // </smpl> Signed-off-by:
-
Geert Uytterhoeven authored
Looking at older kernel sources the APOLLO_ELPLUS option was added somewhere during kernel 2.1, but even kernel 2.2.0 does not contain any driver that would be enabled through it... Reported-by:
Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
Adrian Bunk authored
It seems the driver was removed back in kernel 2.3 but the options were forgotten. Reported-by:
-
Adrian Bunk authored
When the driver was removed back in 2002 the option was forgotten. Reported-by:
-
Geert Uytterhoeven authored
Add the missing call to apollo_parse_bootinfo(), which had been lost from a big Apollo support patch by Peter De Schrijver in 1999. Thanks to Adrian Bunk for noticing! Signed-off-by:
-
Adrian Bunk authored
m68k: remove stale ARCH_SUN4 #define Signed-off-by:
-
Adrian Bunk authored
This patch contains the following possible cleanups: - make the following needlessly global code static: - config.c: sun3_bootmem_alloc() - config.c: sun3_sched_init() - dvma.c: dvma_page() - idprom.c: struct Sun_Machines[] - mmu_emu.c: struct ctx_alloc[] - sun3dvma.c: iommu_use[] - sun3ints.c: led_pattern[] - remove the unused sbus.c Signed-off-by:
-
Adrian Bunk authored
This patch makes the following needlessly global functions static: - q40_reset() - q40_halt() - q40_disable_irqs() - q40_gettimeoffset() - q40_hwclk() - q40_get_ss() - q40_set_clock_mmss() Signed-off-by:
-
Adrian Bunk authored
This patch contains the following possible cleanups: - make the following needlessly global code (always) static: - baboon.c: struct baboon - baboon.c: baboon_irq() - config.c: mac_orig_videoaddr - config.c: mac_identify() - config.c: mac_report_hardware() - config.c: mac_debug_console_write() - config.c: mac_sccb_console_write() - config.c: mac_scca_console_write() - config.c: mac_init_scc_port() - oss.c: oss_irq() - oss.c: oss_nubus_irq() - psc.c: psc_debug_dump() - psc.c: psc_dma_die_die_die() - via.c: rbv_clear - remove the unused bootparse.c - #if 0 the following unused functions: - config.c: mac_debugging_short() - config.c: mac_debugging_long() - remove the following unused code: - config.c: mac_bisize - config.c: mac_env - config.c: mac_SCC_init_done - config.c: mac_SCC_reset_done - config.c: mac_init_scca_port() - config.c: mac_init_sccb_port() Signed-off-by:
-
Adrian Bunk authored
This patch contains the following possible cleanups: - make the following needlessly global functions (always) static: - atari_mfp_console_write() - atari_scc_console_write() - atari_midi_console_write() - atari_init_mfp_port() - atari_init_scc_port() - atari_init_midi_port() - #if 0 the following unused functions: - atari_mfp_console_wait_key() - atari_scc_console_wait_key() - atari_midi_console_wait_key() - remove the following unused variables: - atari_MFP_init_done - atari_SCC_init_done Signed-off-by:
-
Adrian Bunk authored
This patch contains the following possible cleanups: - amiints.c: add a proper prototype for amiga_init_IRQ() in include/asm-m68k/amigaints.h - make the following needlessly global code static: - config.c: amiga_model - config.c: amiga_psfreq - config.c: amiga_serial_console_write() - #if 0 the following unused functions: - config.c: amiga_serial_puts() - config.c: amiga_serial_console_wait_key() - config.c: amiga_serial_gets() - remove the following unused variable: - config.c: amiga_masterclock Signed-off-by: -
Adrian Bunk authored
This patch fixes the following build error: <-- snip --> .. Building modules, stage 2. MODPOST 1203 modules ERROR: "c2p" [drivers/video/amifb.ko] undefined! .. make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by:
-
Adrian Bunk authored
This patch fixes the following build error: <-- snip --> .. Building modules, stage 2. MODPOST 1203 modules ERROR: "amiga_vblank" [drivers/video/amifb.ko] undefined! .. make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by:
-
Adrian Bunk authored
This patch adds the missing MODULE_LICENSE("GPL"). Reported-by: -
Geert Uytterhoeven authored
Register the Atari-specific video modes with sysfs, so you can see them in /sys/class/graphics/fb0/modes and change the video mode by writing to /sys/class/graphics/fb0/mode. Signed-off-by:
-
Geert Uytterhoeven authored
Register the Amiga-specific video modes with sysfs, so you can see them in /sys/class/graphics/fb0/modes and change the video mode by writing to /sys/class/graphics/fb0/mode. Signed-off-by:
-
akinobu.mita@gmail.com authored
zorro: use memory_read_from_buffer Signed-off-by:
-
Robert P. J. Day authored
ZORRO: Replace deprecated __initcall with equivalent device_initcall. Signed-off-by:
-
Adrian Bunk authored
Unless I miss something that's code for a sparc machine even the sparc code no longer supports that got copied to m68k when these files were copied. Signed-off-by:
-
Adrian Bunk authored
It seems to match the intention behind multi_defconfig to make it the default defconfig. Signed-off-by:
-
Mathieu Desnoyers authored
> This is a no-no for those archs that still use -traditional. > > I dunno if this is a problem for you at the moment and the > > right fix is anyway to nuke -traditional. > > > > Sam Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by:
-
Geert Uytterhoeven authored
Allow no CPU/platform type for allnoconfig - Provide a dummy value for FPSTATESIZE if no CPU type was selected - Provide a dummy value for NR_IRQS if no platform type was selected - Warn the user if no CPU or platform type was selected Note: you still cannot build an allnoconfig kernel, as CONFIG_SWAP=n doesn't build and we cannot easily fix that (http://groups.google.com/group/linux.kernel/browse_thread/thread/d430c78b07e1827b) Signed-off-by:
-
Cyrill Gorcunov authored
This patch includes page.h header into linker script that allow us to use PAGE_SIZE macro instead of numeric constant Signed-off-by:
Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
According to the tests in do_initcalls(), the proper error code in case no device is found is -ENODEV, not -ENXIO or -EIO. Signed-off-by:
-
Paulius Zaleckas authored
Use net_device_stats from net_device structure instead of local. Signed-off-by:
Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Adrian Bunk authored
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by:
-
git://oss.oracle.com/git/jlbec/linux-2.6Linus Torvalds authored
* 'configfs-fixup-ptr-error' of git://oss.oracle.com/git/jlbec/linux-2.6: configfs: Allow ->make_item() and ->make_group() to return detailed errors. Revert "configfs: Allow ->make_item() and ->make_group() to return detailed errors."
-
Thomas Gleixner authored
commit d1857056 ("ACPI: don't walk tables if ACPI was disabled") is another superfluous duplicate commit caused by git -> quilt -> git conversion. Revert it. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Thomas Gleixner authored
commit 816c2eda ("dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled.") was merged between 2.6.26-rc8 and -rc9) Due to rebasing the ACPI tree via quilt the same patch got applied again via commit cc7e5166 ("dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled.") Revert it, as it is obviously bogus. Signed-off-by:
-
Alan Cox authored
Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Alan Cox authored
Move more bits into the tty_port structure Signed-off-by:
-
Alan Cox authored
Fix up the termios of the people who have not yet got with the program Signed-off-by:
-
Alan Cox authored
Switch cyclades to use the new tty_port structure Signed-off-by:
-
Alan Cox authored
Reverse the order of one test and it gets much more readable Signed-off-by:
-
Alan Cox authored
Switch the synclink ports to use the new tty_port structure Signed-off-by:
-
Alan Cox authored
Switch the stallion driver to use the tty_port structure Signed-off-by:
-
Haavard Skinnemoen authored
The tty pointer has been moved into a tty_port field, so we need to use ->info->port.tty instead of just ->info->tty. Fixes these build errors: David Brownell <david-b@pacbell.net> wrote: > drivers/serial/atmel_serial.c: In function 'atmel_rx_from_ring': > drivers/serial/atmel_serial.c:665: error: 'struct uart_info' has no member named 'tty' > drivers/serial/atmel_serial.c: In function 'atmel_rx_from_dma': > drivers/serial/atmel_serial.c:672: error: 'struct uart_info' has no member named 'tty' > drivers/serial/atmel_serial.c: In function 'atmel_startup': > drivers/serial/atmel_serial.c:797: error: 'struct uart_info' has no member named 'tty' > make[2]: *** [drivers/serial/atmel_serial.o] Error 1 Signed-off-by:
Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by:
-
