- 30 Jan, 2008 40 commits
-
-
Andi Kleen authored
Since change_page_attr() is tricky code it is good to have some regression test code. This patch maps and unmaps some random pages in the direct mapping at boot and then dumps the state and does some simple sanity checks. Add it with a CONFIG option. Signed-off-by:
Andi Kleen <ak@suse.de> Acked-by:
Jan Beulich <jbeulich@novell.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Ingo Molnar authored
based on this patch from Andi Kleen: | Subject: CPA: Return the page table level in lookup_address() | From: Andi Kleen <ak@suse.de> | | Needed for the next change. | | And change all the callers. and ported it to x86.git. Signed-off-by:
-
Andi Kleen authored
Needed for some test code. Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Andi Kleen authored
- Rename it to pte_exec() from pte_exec_kernel(). There is nothing kernel specific in there. - Move it into the common file because _PAGE_NX is 0 on !PAE and then pte_exec() will be always evaluate to true. Signed-off-by:
-
Harvey Harrison authored
Similar to x86 64-bit. Signed-off-by:
-
Andi Kleen authored
When CONFIG_DEBUG_RODATA is enabled undo the ro mapping and redo it again. This gives some simple testing for change_page_attr(). Signed-off-by:
-
Ingo Molnar authored
clean up arch/x86/mm/pageattr_64.c. no code changed: text data bss dec hex filename 1751 16 0 1767 6e7 pageattr_64.o.before 1751 16 0 1767 6e7 pageattr_64.o.after Signed-off-by:
-
Ingo Molnar authored
clean up arch/x86/mm/pageattr_32.c. no code changed: text data bss dec hex filename 1255 40 0 1295 50f pageattr_32.o.before 1255 40 0 1295 50f pageattr_32.o.after Signed-off-by:
-
Ingo Molnar authored
Prepare ioremap() to default to uncached. This will be the safest - but first we have to fix CPA. Signed-off-by:
-
Yinghai Lu authored
remove the recursion from this function. Signed-off-by:
-
Jeremy Fitzhardinge authored
If SHARED_KERNEL_PMD is false, then we need to allocate and initialize the kernel pmd. We can easily piggy-back this onto the existing pmd prepopulation code. Signed-off-by:
Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by:
-
Jeremy Fitzhardinge authored
In PAE mode, an update to the pgd requires a cr3 reload to make sure the processor notices the changes. Since this also has the side-effect of flushing the tlb, its an expensive operation which we want to avoid where possible. This patch mitigates the cost of installing the initial set of pmds on process creation by preallocating them when the pgd is allocated. This avoids up to three tlb flushes during exec, as it creates the new process address space while the pagetable is in active use. The pmds will be freed as part of the normal pagetable teardown in free_pgtables, which is called in munmap and process exit. However, free_pgtables will only free parts of the pagetable which actually contain mappings, so stray pmds may still be attached to the pgd at pgd_free time. We must mop them up to prevent a memory leak. Signed-off-by:
-
Jeremy Fitzhardinge authored
Deal properly with pmd-level pages being allocated and freed dynamically. We can handle them more or less the same as pte pages. Also, deal with early_ioremap pagetable manipulations. Signed-off-by:
-
Jeremy Fitzhardinge authored
Convert macros into inline functions, for better type-checking. This patch required a little bit of fiddling with headers in order to make __(pte|pmd)_free_tlb inline rather than macros. asm-generic/tlb.h includes asm/pgalloc.h, though it doesn't directly use any pgalloc definitions. I removed this include to avoid an include cycle, but it may cause secondary compile failures by things depending on the indirect inclusion; arch/x86/mm/hugetlbpage.c was one such place; there may be others. Signed-off-by:
-
Jeremy Fitzhardinge authored
Add mm to paravirt_alloc_pd, partly to make it consistent with paravirt_alloc_pt, and because later changes will make use of it. Signed-off-by:
-
Jeremy Fitzhardinge authored
Looks like a mismerge/misapply dropped one of the cases of pte flag masking for Xen. Also, only mask the flags for present ptes. Signed-off-by:
-
Yinghai Lu authored
old sequence: size ==> >4G ==> point to RAM changed to: >4G ==> point to RAM ==> size some bios even leave aper to unclear, so check size at last. To avoid reporting: Node 0: Aperture @ 4a42000000 size 32 MB Aperture too small (32 MB) with this change we will get: Node 0: Aperture @ 4a42000000 size 32 MB Aperture beyond 4G. Ignoring. Signed-off-by:
Yinghai Lu <yinghai.lu@sun.com> Signed-off-by:
-
Alistair John Strachan authored
Some consumer ICH9 boards (such as the Abit IP35 Pro) do not provide a BIOS option for enabling the HPET. The same ICH workaround used for 6,7,8 can be applied to 9. Here I enable the only PCI id that was visible on my system. I have confirmed the HPETs work both from userspace and as a clocksource for the running kernel (2.6.24 here) after applying this patch. Force enabled HPET at base address 0xfed00000 hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 64-bit timers, 14318180 Hz Signed-off-by:
Alistair John Strachan <alistair@devzero.co.uk> Signed-off-by:
-
Yinghai Lu authored
in init/main.c boot_cpu_init() does that before. Signed-off-by:
-
Yinghai Lu authored
in init/main.c boot_cpu_init() already does that before setup_arch Signed-off-by:
-
Ian Campbell authored
Remainder of unification can occur inplace. size reports no change in arch/x86/boot/compressed/vmlinux. Signed-off-by:
Ian Campbell <ijc@hellion.org.uk> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Ian Campbell authored
size reports no change in arch/x86/boot/compressed/vmlinux. Signed-off-by:
-
Ian Campbell authored
size reports no change in arch/x86/boot/compressed/vmlinux. Signed-off-by:
-
Ian Campbell authored
size reports no change in arch/x86/boot/compressed/vmlinux. Signed-off-by:
-
Ian Campbell authored
There seems to be a preference for the 64 bit version so use that on 32 bit and drop the stray leading "." Signed-off-by:
-
Ian Campbell authored
The files are now identical so merge them. size reports no change in arch/x86/boot/compressed/vmlinux. Signed-off-by:
-
Ian Campbell authored
vmlinux_64 and vmlinux_32.scr are now identical size shows an expected movement from .text to .rodata and 4 extra bytes of padding. Signed-off-by:
-
Ian Campbell authored
size reports no change in arch/x86/boot/compressed/vmlinux. Signed-off-by:
-
Ian Campbell authored
size reports no change in arch/x86/boot/compressed/vmlinux. Signed-off-by:
-
Sam Ravnborg authored
Without this patch the linker will generate a section named .sched.text.1 which is unexpected. This is because the gcc generated section has "ax" but the assembler usage of .sched.text lacks the "ax" specifier. It would be better to have a definition we could use from assembler code but I did not find a suitable header file for it. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Sam Ravnborg authored
Fix the following warning: WARNING: arch/x86/kernel/built-in.o(.cpuinit.text+0x7a3): Section mismatch: reference to .init.text:amd_detect_cmp in 'init_amd' The function amd_detect_cmp were annotated __init and was only used from init_amd() which are annotated __cpuinit. Annotate amd_detect_cmp() with _cpuinit to fix it. Signed-off-by:
-
Sam Ravnborg authored
Fix following warning: WARNING: arch/x86/kernel/built-in.o(__ksymtab+0x2b0): Section mismatch: reference to .cpuinit.text:arch_register_cpu in '__ksymtab_arch_register_cpu' Annotating exported symbols are wrong. Previously the warning were hidden by avoiding the export in the non HOTPLUG_CPU case but the improved checks in modpost caught it anyway. Fix it by removing the __cpuinit annotation and rearrange the code a bit to save one ifdef/endif pair. Signed-off-by:
-
Sam Ravnborg authored
Fix the following warnings: WARNING: arch/x86/mm/built-in.o(.text+0x1abc): Section mismatch: reference to .init.data:nodes_parsed in 'unparse_node' WARNING: arch/x86/mm/built-in.o(.text+0x1ac6): Section mismatch: reference to .cpuinit.data:apicid_to_node in 'unparse_node' WARNING: arch/x86/mm/built-in.o(.text+0x1ad2): Section mismatch: reference to .cpuinit.data:apicid_to_node in 'unparse_node' unparse_node are static and only used by acpi_scan_nodes which is already annotated __init. So we annotate unparse_node with __init. Signed-off-by:
-
Sam Ravnborg authored
Fix following warnings: WARNING: arch/x86/kernel/built-in.o(.text+0x139e1): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x139f5): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x13a0c): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x13a12): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x13a1a): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x13a36): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x13a42): Section mismatch: reference to .init.data: Warning was caused by access to the __initdata annotated variable from the non-annotated static function check_dev_quirk(). check_dev_quirk() were only used from a function annotated __init so add __init annotation to check_dev_quirk() to fix it. Signed-off-by:
-
Sam Ravnborg authored
Fix following warning: WARNING: arch/x86/kernel/built-in.o(.text+0x10ea0): Section mismatch: reference to .cpuinit.data:num_processors in 'acpi_unmap_lsapic' The exported function acpi_unmap_lsapic() references the variable num_processors that is annotated __cpuinitdata. Remove the annotation of num_processors as we never know when an exported function are called. And drop the needless initialsation to 0. Warning was seen on 64 bit but similar pattern were seen in 32 bit - so fix it up there too. Signed-off-by:
-
Sam Ravnborg authored
Fix the following warning: WARNING: arch/x86/kernel/built-in.o(.text+0x3): Section mismatch: reference to .cpuinit.data:force_mwait in 'mwait_usable' [Seen on 64 bit only but similar pattern exist on 32 bit so fix it there too] mwait_usable() were only used by a function annotated __cpuinit so annotate mwait_usable() with __cpuinit to fix the warning. Signed-off-by:
-
Sam Ravnborg authored
Fix following warning: WARNING: arch/x86/kernel/cpu/mcheck/built-in.o(.text+0x1584): Section mismatch: reference to .cpuinit.text:threshold_create_device in 'threshold_cpu_callback' threshold_cpu_callback() is only used by threshold_cpu_notifier. threshold_cpu_notifier is only used for cpu hot plug as it is registered using register_hotcpu_notifier(). Mark them both __cpuinit to fix the warning. Signed-off-by:
-
Sam Ravnborg authored
Fix following warning: WARNING: arch/x86/kernel/cpu/mcheck/built-in.o(.text+0x752): Section mismatch: reference to .cpuinit.text:mce_create_device in 'mce_cpu_callback' mce_cpu_callback() is only used by mce_cpu_notofier. The notifier is only used for hotplugable cpu's as it is registered using register_hotcpu_notifier(), Annotate them both __cpuinit to fix the warning. Signed-off-by:
-
Florian Fainelli authored
The RDC R-321x SoC needs a reboot fixup which uses its internal hardware watchdog set to reset the CPU on next tick. Signed-off-by:
Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by:
-
Florian Fainelli authored
This patch adds support for the RDC R-321x system-on-chip, also known as R-861x-(G). It uses the generic GPIO API and has support for the on-chip hardware watchdog. Build-fix from: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
