Merge branch 'skip_delete_inode' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2-mark into ocfs2-fixes

When asked for a partial read of the LVB in a dlmfs file, we can
accidentally calculate a negative count.
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

In reflink we update the id info on the disk but forgot to update
the corresponding information in the VFS inode.  Update them
accordingly when we want to preserve the attributes.
Reported-by: Jeff Liu <jeff.liu@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

If "handle" is non null at the end of the function then we assume it's a
valid pointer and pass it to ocfs2_commit_trans();
Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

If we get a failure during creation of an inode we'll allow the orphan code
to remove the inode, which is correct. However, we need to ensure that we
don't get any errors after the call to ocfs2_add_entry(), otherwise we could
leave a dangling directory reference. The solution is simple - in both
cases, all I had to do was move ocfs2_dentry_attach_lock() above the
ocfs2_add_entry() call.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Mark the inode with flag OCFS2_INODE_SKIP_ORPHAN_DIR in ocfs2_mknod, so we
can kill the inode in case of error.

[ Fixed up comment style -Mark ]
Signed-off-by: Li Dongyang <lidongyang@novell.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Mark the inode with flag OCFS2_INODE_SKIP_ORPHAN_DIR when we get an error
after allocating one, so that we can kill the inode.
Signed-off-by: Li Dongyang <lidongyang@novell.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Currently in the error path of ocfs2_symlink and ocfs2_mknod, we just call
iput with the inode we failed with, but the inode wipe code will complain
because we don't add the inode to orphan dir. One solution would be to lock
the orphan dir during the entire transaction, but that's too heavy for a
rare error path. Instead, we add a flag, OCFS2_INODE_SKIP_ORPHAN_DIR which
tells the inode wipe code that it won't find this inode in the orphan dir.

[ Merge fixes and comment style cleanups -Mark ]
Signed-off-by: Li Dongyang <lidongyang@novell.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: ensure NCQ error result taskfile is fully initialized before returning it via qc->result_tf.
  libata: fix docs, RE port and device of libata.force ID separated by point
  pata_pcmcia/ide-cs: add IDs for transcend and kingston cards
  libata: fix locking around blk_abort_request()

before returning it via qc->result_tf.

Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

According to libata-core correctly around line 6572:

	/* parse id */
	p = strchr(id, '.');
	...

the optional device is separated from the port in the libata.force ID
by a point or dot instead of by a colon.

Fix documentation to reflect this.
Signed-off-by: Roman Fietze <roman.fietze@telemotive.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

This patch adds idstrings for Kingston 1GB/4GB and Transcend 4GB/8GB.
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

blk_abort_request() expectes queue lock to be held by the caller.
Grab it before calling the function.

Lack of this synchronization led to infinite loop on corrupt
q->timeout_list.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  usb: Increase timeout value for device reset
  USB: put claimed interfaces in the "suspended" state
  USB: EHCI: defer reclamation of siTDs
  USB: fix remote wakeup settings during system sleep
  USB: pl2303: add AdLink ND-6530 USB IDs
  USB: Add id for HP ev2210 a.k.a Sierra MC5725 miniPCI-e Cell Modem.
  USB: OHCI: DA8xx/OMAP-L1x: fix up macro rename
  USB: qcaux: add LG Rumor and Sanyo Katana LX device IDs
  usb: wusb: don't overflow the Keep Alive IE buffer
  USB: ehci: omap: fix kernel panic with rmmod
  USB: fixed bug in usbsevseg using USB autosuspend incorrectly
  USB: ti_usb_3410_5052: adding multitech dialup fax/modem devices

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  sysfs: use sysfs_attr_init in ASUS atk0110 driver
  Documentation/HOWTO: update git home URL
  Documentation: -stable rules: upstream commit ID requirement reworded

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: use PIPE_CONTROL instruction on Ironlake and Sandy Bridge
  drm/i915: cleanup FBC buffers at unload time
  drm/i915: fix tiling limits for i915 class hw v2
  drm/i915: set DIDL using the ACPI video output device _ADR method return.
  drm/i915: Fix 82854 PCI ID, and treat it like other 85X
  drm/i915: Attempt to fix watermark setup on 85x (v2)

* 'for-linus' of git://neil.brown.name/md:
  md/raid5: fix previous patch.

Annotate dynamic sysfs attribute in atk_create_files(). This gets
rid of the following lockdep warning:

 BUG: key ffff8800379ca670 not in .data!
 ------------[ cut here ]------------
 WARNING: at kernel/lockdep.c:2696 lockdep_init_map+0xd2/0x108()
 Hardware name: P5K PRO
 Modules linked in: asus_atk0110(+) pata_acpi firewire_ohci ata_generic
 dm_multipath firewire_core crc_itu_t pata_marvell floppy
 Pid: 599, comm: modprobe Not tainted 2.6.34-rc4 #27
 Call Trace:
  [<ffffffff8104cdb0>] warn_slowpath_common+0x7c/0x94
  [<ffffffff8104cddc>] warn_slowpath_null+0x14/0x16
  [<ffffffff81077c4d>] lockdep_init_map+0xd2/0x108
  [<ffffffff81165873>] sysfs_add_file_mode+0x66/0xa2
  [<ffffffff811658c0>] sysfs_add_file+0x11/0x13
  [<ffffffff8116594b>] sysfs_create_file+0x2a/0x2c
  [<ffffffff812c1f9c>] device_create_file+0x19/0x1b
  [<ffffffffa005b4fd>] atk_add+0x58b/0x72e [asus_atk0110]
  [<ffffffff812572a1>] acpi_device_probe+0x50/0x122
  [<ffffffff812c46af>] driver_probe_device+0xa2/0x127
  [<ffffffff812c4783>] __driver_attach+0x4f/0x6b
  [<ffffffff812c4734>] ? __driver_attach+0x0/0x6b
  [<ffffffff812c3c94>] bus_for_each_dev+0x59/0x8e
  [<ffffffff812c4519>] driver_attach+0x1e/0x20
  [<ffffffff812c4152>] bus_add_driver+0xb9/0x207
  [<ffffffff812c4a5f>] driver_register+0x9d/0x10e
  [<ffffffffa005f000>] ? atk0110_init+0x0/0x31 [asus_atk0110]
  [<ffffffff81257c7c>] acpi_bus_register_driver+0x43/0x45
  [<ffffffffa005f015>] atk0110_init+0x15/0x31 [asus_atk0110]
  [<ffffffffa005f000>] ? atk0110_init+0x0/0x31 [asus_atk0110]
  [<ffffffff81002069>] do_one_initcall+0x5e/0x15e
  [<ffffffff81085075>] sys_init_module+0xd8/0x239
  [<ffffffff81009cf2>] system_call_fastpath+0x16/0x1b
 ---[ end trace 4d0c84007055efb9 ]---
 BUG: key ffff8800379ca638 not in .data!
 BUG: key ffff8800379ca6a8 not in .data!
 BUG: key ffff8800379ca6e0 not in .data!
 BUG: key ffff880036f73670 not in .data!
 BUG: key ffff880036f73638 not in .data!
 BUG: key ffff880036f736a8 not in .data!
 BUG: key ffff880036f736e0 not in .data!
 BUG: key ffff880036f76c70 not in .data!
 BUG: key ffff880036f76c38 not in .data!
 BUG: key ffff880036f76ca8 not in .data!
 BUG: key ffff880036f76ce0 not in .data!
 BUG: key ffff8800368e7670 not in .data!
 BUG: key ffff8800368e7638 not in .data!
 BUG: key ffff8800368e76a8 not in .data!
 BUG: key ffff8800368e76e0 not in .data!
 BUG: key ffff880036ef7670 not in .data!
 BUG: key ffff880036ef7638 not in .data!
 BUG: key ffff880036ef76a8 not in .data!
 BUG: key ffff880036ef76e0 not in .data!
 BUG: key ffff8800373ccc70 not in .data!
 BUG: key ffff8800373ccc38 not in .data!
 BUG: key ffff8800373ccca8 not in .data!
 BUG: key ffff8800373ccce0 not in .data!
 BUG: key ffff880037a60870 not in .data!
 BUG: key ffff880037a60838 not in .data!
 BUG: key ffff880037a608a8 not in .data!
 BUG: key ffff880037a608e0 not in .data!
 BUG: key ffff880037355070 not in .data!
 BUG: key ffff880037355038 not in .data!
 BUG: key ffff8800373550a8 not in .data!
 BUG: key ffff8800373550e0 not in .data!
 BUG: key ffff8800378c2670 not in .data!
 BUG: key ffff8800378c2638 not in .data!
 BUG: key ffff8800378c26a8 not in .data!
 BUG: key ffff8800378c26e0 not in .data!
 BUG: key ffff880036ef7e70 not in .data!
 BUG: key ffff880036ef7e38 not in .data!
 BUG: key ffff880036ef7ea8 not in .data!
 BUG: key ffff880036ef7ee0 not in .data!

Cc: Eric W. Biederman <ebiederm@xmission.com>
Reported-by: Dhaval Giani <dhaval.giani@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Tested-by: Dhaval Giani <dhaval.giani@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Update git home page info.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

It is a hard requirement to include the upstream commit ID in the
changelog of a -stable submission, not just a courtesy to the stable
team.  This concerns only mail submission though, which is no longer
the only way into stable.  (Also, fix a double "the".)
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

It seems that for USB IP on Freescale MX5x processors, it needs >750
usec for the reset to complete. This change should not hurt any other
EHCI hardware.
Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1370) fixes a bug in the USB runtime power management
code.  When a driver claims an interface, it doesn't expect to need to
call usb_autopm_get_interface() or usb_autopm_put_interface() for
runtime PM to work.  Runtime PM can be controlled by the driver's
primary interface; the additional interfaces it claims shouldn't
interfere.  As things stand, the claimed interfaces will prevent the
device from autosuspending.

To fix this problem, the patch sets interfaces to the suspended state
when they are claimed.

Also, although in theory this shouldn't matter, the patch changes the
suspend code so that interfaces are suspended in reverse order from
detection and resuming.  This is how the PM core works, and we ought
to use the same approach.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Debugged-and-tested-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1369) fixes a problem in ehci-hcd.  Some controllers
occasionally run into trouble when the driver reclaims siTDs too
quickly.  This can happen while streaming audio; it causes the
controller to crash.

The patch changes siTD reclamation to work the same way as iTD
reclamation: Completed siTDs are stored on a list and not reused until
at least one frame has passed.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Nate Case <ncase@xes-inc.com>
CC: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1363) changes the way USB remote wakeup is handled
during system sleeps.  It won't be enabled unless an interface driver
specifically needs it.  Also, it won't be enabled during the FREEZE or
QUIESCE phases of hibernation, when the system doesn't respond to
wakeup events anyway.  Finally, if the device is already
runtime-suspended with remote wakeup enabled, but wakeup is supposed
to be disabled for the system sleep, the device gets woken up so that
it can be suspended again with the proper wakeup setting.

This will fix problems people have reported with certain USB webcams
that generate wakeup requests when they shouldn't, and as a result
cause system suspends to fail.  See

	https://bugs.launchpad.net/ubuntu/+source/linux/+bug/515109Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Erik Andrén <erik.andren@gmail.com>
CC: <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

I read a rumor that the AdLink ND6530 USB RS232, RS422 and RS485
isolated adapter is actually a PL2303 based usb serial adapter. I
tried it out, and as far as I can tell it works.
Signed-off-by: Manuel Jander <manuel.jander@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: William Lightning <kassah@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

It appears that the DA8xx/OMAP-L1x glue layer went into the kernel uncompilable:
commit 1960e693 (davinci: da8xx/omapl1: add
support for the second sysconfig module) has renamed DA8XX_SYSCFG_* macros to
DA8XX_SYSCFG0_* and it's been committed before the glue layer...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

These phones also have the familiar ttyACM0/ttyUSB0 schizophrenia when
placed into "Dial-up Networking" mode after connecting a USB cable.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The Keep Alive IE only has space for WUIE_ELT_MAX (== 4) device addresses.
Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Sets the regulator values to NULL if they are not defined. This
is required to fix the kernel panic in exit path when EHCI module
is removed on the platforms where EHCI regulator are not set.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch fixes a bug with the usbsevseg driver which assumed that USB
autosuspend will always be used.
Signed-off-by: Harrison Metzger <harrisonmetz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The following patch adds support for Multitech Systems' MT9234MU and
MT9234ZBA usb dialup fax modems. It is based on a patch and firmware
provided to me by Multitech Systems' support, after I reported to them
that my MT9234MU modem was not working with recent linux kernels.
Signed-off-by: Alex Manoussakis <alex@juniper.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Since 965, the hardware has supported the PIPE_CONTROL command, which
provides fine grained GPU cache flushing control.  On recent chipsets,
this instruction is required for reliable interrupt and sequence number
reporting in the driver.

So add support for this instruction, including workarounds, on Ironlake
and Sandy Bridge hardware.

https://bugs.freedesktop.org/show_bug.cgi?id=27108Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

Previous patch changes stripe and chunk_number to sector_t but
mistakenly did not update all of the divisions to use sector_dev().

This patch changes all the those divisions (actually the '%' operator)
to sector_div.
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@kernel.org
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>

This keeps the memory manager from complaining when we take it down.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: ohci: wait for local CSR lock access to finish
  firewire: ohci: prevent aliasing of locally handled register addresses
  firewire: core: fw_iso_resource_manage: return -EBUSY when out of resources
  firewire: core: fix retries calculation in iso manage_channel()
  firewire: cdev: fix cut+paste mistake in disclaimer

I posted to dri-devel@lists.sourceforge.net, and got a bounce back:

   The dri-devel list has moved to freedesktop.org (see
   http://lists.freedesktop.org/mailman/listinfo/dri-devel). If you were
   subscribed to the list here, the subscription should have been
   transferred to the new location.

   Please only post to the new list.

Fix MAINTAINERS to correspond.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'slabh' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc:
  uml: Fix build breakage after slab.h changes

Fix operator precedence warning (from sparse), which results in the
data value always being 0:

drivers/scsi/qla4xxx/ql4_mbx.c:470:66: warning: right shift by bigger than source value
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Ravi Anand <ravi.anand@qlogic.com>
Cc: David C Somayajulu <david.somayajulu@qlogic.com>
Cc: Karen Higgins <karen.higgins@qlogic.com>
Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] zcore: Fix reipl device detection
  [S390] vdso: use ntp adjusted clock multiplier
  [S390] cio: use exception-save stsch
  [S390] add hook to reenable mss after hibernation
  [S390] cio: allow enable_facility from outside init functions
  [S390] dasd: fix endless loop in erp