Reported-by: Andrew Lyon <andrew.lyon@gmail.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

BugLink: https://bugs.launchpad.net/bugs/474972

This Sony model needs External Amplifier muted for audible playback, so
make sure we set the inv_eapd quirk.
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Now up to 128 substreams are supported.
Reported-by: Adrian Bridgett <adrian@smop.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of
requiring manual settings of PCMCIA_DEBUG.

Also, remove all usages of the CS_CHECK macro and replace them with proper
Linux style calling and return value checking. The extra error reporting may
be dropped, as the PCMCIA core already complains about any (non-driver-author)
errors.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Activate the DXS volume controls only when the corresponding stream is
being used.  This makes the behaviour consistent with the other drivers
that have per-stream volume controls.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Mark Hills <mark@pogo.org.uk>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix a bug which can result in white noise from the driver after stream
start or unpause.
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix a race which causes snd_pcm_update_hw_ptr_pos() to report a bug.
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

If the NULL test on h is needed in snd_harmony_mixer_init, then the
dereference should be after the NULL test.

Actually, there is a sequence of calls: snd_harmony_create, then
snd_harmony_pcm_init, and then snd_harmony_mixer_init.  snd_harmony_create
initializes h, but may indeed leave it as NULL.  There was no NULL test at
the beginning of snd_harmony_pcm_init, so I have added one.  The NULL test
in snd_harmony_mixer_init is then not necessary, but in case the ordering
of the calls changes, I have left it, and moved the dereference after it.

A simplified version of the semantic match that detects this problem is as
follows (http://coccinelle.lip6.fr/):

// <smpl>
@match exists@
expression x, E;
identifier fld;
@@

* x->fld
  ... when != \(x = E\|&x\)
* x == NULL
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

In pcm.c, if the NULL test on pcm is needed, then the dereference should be
after the NULL test.

In dummy.c and ali5451.c, the context of the calls to
snd_card_dummy_new_mixer and snd_ali_free_voice show that dummy and pvoice,
respectively cannot be NULL.

A simplified version of the semantic match that detects this problem is as
follows (http://coccinelle.lip6.fr/):

// <smpl>
@match exists@
expression x, E;
identifier fld;
@@

* x->fld
  ... when != \(x = E\|&x\)
* x == NULL
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The attached patch fixes the problems introduced in this commit:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=eea0579fc85e64e9f05361d5aacf496fe7a151aa

- Fix nForce workaround by honouring the pointer_update var
- Revert "ns" to u64, as per the hrtimer API
- Revert to the zero-delay timer startup, since I can't reproduce any
  problem with it (please, give me the hint!)
Signed-off-by: Stas Sergeev <stsp@aknet.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

SND_CS5535AUDIO is available on Loongson(MIPS compatible) family
machines, and checked it with ARCH=x86_64, no relative compiling
warnings & errors, so, remove the platform dependency directly.

Reported-by: rixed@happyleptic.org
Acked-by: Andres Salomon <dilinger@collabora.co.uk>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

In the commit f0613d57
    ALSA: hda - Add full rates/formats support for Nvidia HDMI
the flag LIMITIED_RATE_FMT_SUPPORT was set as default, as I forgot
to clear before commit.

Let's enable all formats/rates as default.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

After a reboot on an ARM1176 which amounts to a softreset, it has been
noted that the ALSA driver does not get registered and the probe fails
with the error "aaci-pl041 fpga:04: ac97 read back fail". In the process
of reading from a register the SL1TxBusy bit is set indicating that the
transceiver is busy and remains so until the default timeout occurs.
Set the Power down register 0x26 to an arbitrary value as specified in
the PL041 manual (page: 3-18) so that AACISL1TX/AACISL2TX registers take
their default state.
Signed-off-by: Philby John <pjohn@in.mvista.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The volume-knob widget needs to be set with 0x7f instead of 0xff
for Dell laptops with STAC9228 codec, too, like the previous commit.

Reference: Novell bnc#545013
	http://bugzilla.novell.com/show_bug.cgi?id=545013Signed-off-by: Takashi Iwai <tiwai@suse.de>

On FSC laptops, the sound gets muted gradually when the volume is chnaged.
This is due to the wrong volume-knob widget setup.  The delta bit (bit 7)
shouldn't be set for these devices.

This patch adds a new quirk to set the value 0x7f to the widget 0x24
instead of 0xff.

Reference: Novell bnc#546006
	http://bugzilla.novell.com/show_bug.cgi?id=546006Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALC861-VD lenovo model causes overflow of spec->init_verbs entries due to
the recent changes.  Simply increase the array size to avoid the overflow.
Reported-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

If two streams are started immediately after one another (such as a
playback and a recording stream), the call to set hw params fails with
EBUSY. This patch makes the call succeed, so playback and recording will
work properly.
Signed-off-by: David Henningsson <launchpad.web@epost.diwic.se>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix the num_total_dacs setting for Chaintech AV710. The existing comment
that only PSDOUT0 is connected is correct, but since the card is using
packed AC97 mode to send 6 channels to the codec, num_total_dacs should be
set to 6 and not 2. This allows 6-channel surround to work. Also clarify
a comment regarding the additional WM8728 codec on this card (it's connected
to the SPDIF output and always receives the same data).
Signed-off-by: Robert Hancock <hancockrwd@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Allow Nvidia HDMI to support more possible sample rates and formats.
At best, the really supported rates and formats should be determined
together with the negotiation with the HDMI receiver, but it's currently
not implemented yet (Nvidia stuff seems incompatible with HDMI 1.3
standard in this regard).  As a compromise, we enable all bits, assuming
that all recent devices do support such rates/formats.
Tested-by: Alan Alan <alanwww1@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Increase the default and maximum PCM buffer prellocation size for ice1724's
SPDIF and independent stereo pair outputs to 256K, which is the hardware's
maximum supported size. This allows a reduction in interrupt rate and
potentially power usage when an application is not latency-critical.
Signed-off-by: Robert Hancock <hancockrwd@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix following circular locking in the opl3 driver.

=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.32-rc3 #87
-------------------------------------------------------
swapper/0 is trying to acquire lock:
 (&opl3->voice_lock){..-...}, at: [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth]

but task is already holding lock:
 (&opl3->sys_timer_lock){..-...}, at: [<cca75169>] snd_opl3_timer_func+0x19/0xc0 [snd_opl3_synth]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&opl3->sys_timer_lock){..-...}:
       [<c02461d5>] validate_chain+0xa25/0x1040
       [<c0246aca>] __lock_acquire+0x2da/0xab0
       [<c024731a>] lock_acquire+0x7a/0xa0
       [<c044c300>] _spin_lock_irqsave+0x40/0x60
       [<cca75046>] snd_opl3_note_on+0x686/0x790 [snd_opl3_synth]
       [<cca68912>] snd_midi_process_event+0x322/0x590 [snd_seq_midi_emul]
       [<cca74245>] snd_opl3_synth_event_input+0x15/0x20 [snd_opl3_synth]
       [<cca4dcc0>] snd_seq_deliver_single_event+0x100/0x200 [snd_seq]
       [<cca4de07>] snd_seq_deliver_event+0x47/0x1f0 [snd_seq]
       [<cca4e50b>] snd_seq_dispatch_event+0x3b/0x140 [snd_seq]
       [<cca5008c>] snd_seq_check_queue+0x10c/0x120 [snd_seq]
       [<cca5037b>] snd_seq_enqueue_event+0x6b/0xe0 [snd_seq]
       [<cca4e0fd>] snd_seq_client_enqueue_event+0xdd/0x100 [snd_seq]
       [<cca4eb7a>] snd_seq_write+0xea/0x190 [snd_seq]
       [<c02827b6>] vfs_write+0x96/0x160
       [<c0282c9d>] sys_write+0x3d/0x70
       [<c0202c45>] syscall_call+0x7/0xb

-> #0 (&opl3->voice_lock){..-...}:
       [<c02467e6>] validate_chain+0x1036/0x1040
       [<c0246aca>] __lock_acquire+0x2da/0xab0
       [<c024731a>] lock_acquire+0x7a/0xa0
       [<c044c300>] _spin_lock_irqsave+0x40/0x60
       [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth]
       [<cca751f0>] snd_opl3_timer_func+0xa0/0xc0 [snd_opl3_synth]
       [<c022ac46>] run_timer_softirq+0x166/0x1e0
       [<c02269e8>] __do_softirq+0x78/0x110
       [<c0226ac6>] do_softirq+0x46/0x50
       [<c0226e26>] irq_exit+0x36/0x40
       [<c0204bd2>] do_IRQ+0x42/0xb0
       [<c020328e>] common_interrupt+0x2e/0x40
       [<c021092f>] apm_cpu_idle+0x10f/0x290
       [<c0201b11>] cpu_idle+0x21/0x40
       [<c04443cd>] rest_init+0x4d/0x60
       [<c055c835>] start_kernel+0x235/0x280
       [<c055c066>] i386_start_kernel+0x66/0x70

other info that might help us debug this:

2 locks held by swapper/0:
 #0:  (&opl3->tlist){+.-...}, at: [<c022abd0>] run_timer_softirq+0xf0/0x1e0
 #1:  (&opl3->sys_timer_lock){..-...}, at: [<cca75169>] snd_opl3_timer_func+0x19/0xc0 [snd_opl3_synth]

stack backtrace:
Pid: 0, comm: swapper Not tainted 2.6.32-rc3 #87
Call Trace:
 [<c0245188>] print_circular_bug+0xc8/0xd0
 [<c02467e6>] validate_chain+0x1036/0x1040
 [<c0247f14>] ? check_usage_forwards+0x54/0xd0
 [<c0246aca>] __lock_acquire+0x2da/0xab0
 [<c024731a>] lock_acquire+0x7a/0xa0
 [<cca748fe>] ? snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth]
 [<c044c300>] _spin_lock_irqsave+0x40/0x60
 [<cca748fe>] ? snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth]
 [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth]
 [<c044c307>] ? _spin_lock_irqsave+0x47/0x60
 [<cca751f0>] snd_opl3_timer_func+0xa0/0xc0 [snd_opl3_synth]
 [<c022ac46>] run_timer_softirq+0x166/0x1e0
 [<c022abd0>] ? run_timer_softirq+0xf0/0x1e0
 [<cca75150>] ? snd_opl3_timer_func+0x0/0xc0 [snd_opl3_synth]
 [<c02269e8>] __do_softirq+0x78/0x110
 [<c044c0fd>] ? _spin_unlock+0x1d/0x20
 [<c025915f>] ? handle_level_irq+0xaf/0xe0
 [<c0226ac6>] do_softirq+0x46/0x50
 [<c0226e26>] irq_exit+0x36/0x40
 [<c0204bd2>] do_IRQ+0x42/0xb0
 [<c024463c>] ? trace_hardirqs_on_caller+0x12c/0x180
 [<c020328e>] common_interrupt+0x2e/0x40
 [<c0208d88>] ? default_idle+0x38/0x50
 [<c021092f>] apm_cpu_idle+0x10f/0x290
 [<c0201b11>] cpu_idle+0x21/0x40
 [<c04443cd>] rest_init+0x4d/0x60
 [<c055c835>] start_kernel+0x235/0x280
 [<c055c210>] ? unknown_bootoption+0x0/0x210
 [<c055c066>] i386_start_kernel+0x66/0x70
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

* PLEASE NOTE - this change requires the corresponding update of
  envy24control for ice1712 - kind of an ABI change.
* The "Multi Track Peak" control is read-only level meters indicator.
* The control is VERY confusing to most users since it is currently displayed
  in regular mixers. E.g. alsamixer ignores its read-only status
  and allows changing the levels with keys which makes no sense.
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Since patch_alc268() doesn't call set_capture_mixer() (due to its h/w
design different from other siblings), it needs to call fixup_automic_adc()
explicitly to set up the auto-mic routing.  Otherwise the indices for
int/ext mics aren't set properly.

Reference: Novell bnc#544899
	http://bugzilla.novell.com/show_bug.cgi?id=544899Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

These should be handled via set_tdm_slot() now and cause build
failures as-is.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

The "VIA DXS" controls are actually volume controls that apply to the
four PCM substreams, so we better indicate this connection by moving the
controls to the PCM interface.

Commit b452e08e in 2.6.30 broke the
restoring of these volumes by "alsactl restore" that most distributions
use; the renaming in this patch cures that regression by preventing
alsactl from applying the old, wrong volume levels to the new controls.
http://bugzilla.kernel.org/show_bug.cgi?id=14151
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=532613Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

alc_subsystem_id() tries to pick up a headphone pin if not configured,
but this caused side-effects as the problem in commit
15870f05.

This patch fixes the driver behavior to pick up invalid HP pins; at least,
the pins that are listed as the primary outputs aren't taken any more.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.32

ASUS A7K needs additional GPIO1 bit setup; it has to be cleared.
Added a new fixup hook for this laptop so that it works as is.

Refernece: Novell bnc#494309
	http://bugzilla.novell.com/show_bug.cgi?id=494309Signed-off-by: Takashi Iwai <tiwai@suse.de>

The recent auto-parser doesn't work for machines with a single output
with ALC861, such as Toshiba laptops, because alc_subsystem_id() sets
the hp_pins[0] while it's listed in line_outs[0].
This ends up with the doubled initialization of the same mixer widget,
and it mutes the DAC route because hp_pins has no DAC assigned.

To fix this problem, just check spec->autocfg.hp_outs and speaker_outs
so that they are really detected pins.

Reference: Novell bnc#544161
	http://bugzilla.novell.com/show_bug.cgi?id=544161Signed-off-by: Takashi Iwai <tiwai@suse.de>

I'm skipping -rc2 because the -rc1 Makefile mistakenly said -rc2, so in
order to avoid confusion, I'm jumping from -rc1 to -rc3.  That way, when
'uname' (or an oops report) says 2.6.32-rc2, there's no confusion about
whether people perhaps meant -rc1 or -rc2.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'acpi-pad' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  acpi_pad: build only on X86
  ACPI: create Processor Aggregator Device driver

Fixup trivial conflicts in MAINTAINERS file.

* 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6:
  SFI: remove __init from sfi_verify_table
  SFI: fix section mismatch warnings in sfi_core.c