The calculation of nr_pages in scsi_req_map_sg() doesn't account for
the fact that the first page could have an offset that pushes the end
of the buffer onto a new page.
Signed-off-by: Bryan Holty <lgeek@frontiernet.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

A couple write attributes in sas transport layer have a small
bug that prevents them from being written to.  Those
attributes are the link_reset and write_reset.  This is due
the store field being set to NULL.
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

the user_scan() callback currently has the potential to identify the
wrong device in the presence of expanders.  This is because it finds
the first device with a matching target_id, which might be an
expander.  Fix this by making it look specifically for end devices.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

ppa cannot handle highmem pages, and like imm, which already has
this patch, the device is slow, so performance is not a big issue,
so just force pages to be in low memory (hence mapped).
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

All registered reset callback handlers are called during reset processing.
The mptspi modules has its own reset callback handler, just recently
added for issuing domain validation after host reset.  If either the mptsas or
mptfc driver are loaded, this callback could be called. Thus resulting
in domain validation being issued for sas or fibre end devices.

Fix this by having mptbase.c check the bus type against the driver
type and only call the reset handler if they match (or if it's a
non-bus specific reset handler).
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

after upgrading our SUN E250 from 2.4 to 2.6 I'm seeing following error
when the HP DDS4 DAT changer gets probed:

scsi: host 1 channel 0 id 5 lun16777216 has a LUN larger than allowed by
the host adapter

The device is connected to a symbios 875 host. I've talked to Willy
about the problem, and he asked me to try to blacklist the device
for reportlun. I did that with the patch below and it solved the
problem. It now gets properly detected:

 target1:0:5: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16)
  Vendor: HP        Model: C5713A            Rev: H307
  Type:   Sequential-Access                  ANSI SCSI revision: 03
 target1:0:5: Beginning Domain Validation
 target1:0:5: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16)
 target1:0:5: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16)
 target1:0:5: Domain Validation skipping write tests
 target1:0:5: Ending Domain Validation
  Vendor: HP        Model: C5713A            Rev: H307
  Type:   Medium Changer                     ANSI SCSI revision: 03

Signed-off-by: tsbogend@alpha.franken.de
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

flags is a u16, so use htons instead of htonl. Also avoid double
conversion.

Noticed by Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Solar Designer found a race condition in do_add_counters(). The beginning
of paddc is supposed to be the same as tmp which was sanity-checked
above, but it might not be the same in reality. In case the integer
overflow and/or the race condition are triggered, paddc->num_counters
might not match the allocation size for paddc. If the check below
(t->private->number != paddc->num_counters) nevertheless passes (perhaps
this requires the race condition to be triggered), IPT_ENTRY_ITERATE()
would read kernel memory beyond the allocation size, potentially causing
an oops or leaking sensitive data (e.g., passwords from host system or
from another VPS) via counter increments. This requires CAP_NET_ADMIN.
Signed-off-by: Solar Designer <solar@openwall.com>
Signed-off-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

GRE keys are 16 bit.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The prefix argument for nf_log_packet is a format specifier,
so don't pass the user defined string directly to it.
Signed-off-by: Philip Craig <philipc@snapgear.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Coverity checker spotted that we may leak 'hold' in
net/ipv4/netfilter/ipt_recent.c::checkentry() when the following
is true:
  if (!curr_table->status_proc) {
    ...
    if(!curr_table) {
    ...
      return 0;  <-- here we leak.
Simply moving an existing vfree(hold); up a bit avoids the possible leak.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Re-enable posted writes for status FIFO.

Besides bringing back a very minor bandwidth tweak from Linux 2.6.15.x
and older, this also fixes an interoperability regression since 2.6.16:

   http://bugzilla.kernel.org/show_bug.cgi?id=6356
   (sbp2: scsi_add_device failed. IEEE1394 HD is not working anymore.)
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Tested-by: Vanei Heidemann <linux@javanei.com.br>
Tested-by: Martin Putzlocher <mputzi@gmx.de> (chip type unconfirmed)
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

In case the blacklist with workarounds for device bugs yields a false
positive, the module load parameter can now also be used as an override
instead of an addition to the blacklist.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Apple decided to copy some USB stupidity over to FireWire.

The sector number returned by iPods from read_capacity is one too many.
This may cause I/O errors, especially if the kernel is configured for EFI
partition support. We use the same workaround as usb-storage but have to
check for different model IDs.

	http://marc.theaimsgroup.com/?t=114233262300001
	https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=187409

Acknowledgements:
  Diagnosis and therapy by Mathieu Chouquet-Stringer <ml2news@free.fr>,
  additional data about affected and unaffected Apple hardware from
  Vladimir Kotal, Sander De Graaf, Bryan Olmstead and Hugh Dixon.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Grand unification of the three types of workarounds we have so far.

The "skip mode page 8" workaround is now limited to devices which
pretend to be of TYPE_DISK instead of TYPE_RBC. This workaround is no
longer enabled for Initio bridges.

Patch update in anticipation of more workarounds:
 - Add module parameter "workarounds".
 - Deprecate parameter "force_inquiry_hack".
 - Compose the blacklist of a compound type for better readability and
   extensibility.
 - Remove a now unused #define.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [TCP]: reno sacked_out count fix
  [IPV6]: Endian fix in net/ipv6/netfilter/ip6t_eui64.c:match().
  [TR]: Remove an unused export.
  [IPX]: Correct return type of ipx_map_frame_type().
  [IPX]: Correct argument type of ipxrtr_delete().
  [PKT_SCHED]: Potential jiffy wrap bug in dev_watchdog().

* git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/netdev-2.6:
  sky2: prevent dual port receiver problems
  x86_64: Check for bad dma address in b44 1GB DMA workaround
  The ixp2000 driver for the enp2611 was developed on a board with

* 'upstream-linus' of git://oss.oracle.com/home/sourcebo/git/ocfs2:
  configfs: Make sure configfs_init() is called before consumers.
  configfs: configfs_mkdir() failed to cleanup linkage.
  configfs: Fix a reference leak in configfs_mkdir().
  ocfs2: fix gfp mask in some file system paths
  ocfs2: Don't populate uptodate cache in ocfs2_force_read_journal()
  ocfs2: take meta data lock in ocfs2_file_aio_read()
  ocfs2: take data locks around extend

configfs_init() needs to be called first to register configfs before anyconsumers try to access it.  Move up configfs in fs/Makefile to make
sure it is initialized early.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

If configfs_mkdir() errored in certain ways after the parent<->child
linkage was already created, it would not undo the linkage.  Also,
comment the reference counting for clarity.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

configfs_mkdir() failed to release the working parent reference in most
exit paths.  Also changed the exit path for readability.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

We were using GFP_KERNEL in a handful of places which really wanted
GFP_NOFS. Fix this.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

This greatly reduces the amount of memory useded during recovery.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

Temporarily take the meta data lock in ocfs2_file_aio_read() to allow us to
update our inode fields.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

We need to take a data lock around extends to protect the pages that
ocfs2_zero_extend is going to be pulling into the page cache. Otherwise an
extend on one node might populate the page cache with data pages that have
no lock coverage.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] one-line cleanup on set_irq_affinity_info
  [IA64] fix broken irq affinity
  [IA64] sn2 defconfig

Calls to set_irq_info in set_irq_affinity_info() is redundant because
irq_affinity mask was set just one line immediately above it.  Remove
that duplicate call.
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

When CONFIG_PCI_MSI is set, move_irq() is an empty function, causing
grief when sys admin tries to bind interrupt to CPU.
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Set node shift to 10 on SN2 and disable mutex debugging.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

From: "Angelo P. Castellani" <angelo.castellani+lkml@gmail.com>

Using NewReno, if a sk_buff is timed out and is accounted as lost_out,
it should also be removed from the sacked_out.

This is necessary because recovery using NewReno fast retransmit could
take up to a lot RTTs and the sk_buff RTO can expire without actually
being really lost.

left_out = sacked_out + lost_out
in_flight = packets_out - left_out + retrans_out

Using NewReno without this patch, on very large network losses,
left_out becames bigger than packets_out + retrans_out (!!).

For this reason unsigned integer in_flight overflows to 2^32 - something.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes the unused EXPORT_SYMBOL(tr_source_route).

(Note, the usage in net/llc/llc_output.c can't be modular.)
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/spi-2.6:
  [PATCH] SPI: spi_bitbang: clocking fixes
  [PATCH] spi: Update to PXA2xx SPI Driver
  [PATCH] SPI: busnum == 0 needs to work
  [PATCH] SPI: devices can require LSB-first encodings
  [PATCH] SPI: Renamed bitbang_transfer_setup to spi_bitbang_setup_transfer and export it
  [PATCH] SPI: Add David as the SPI subsystem maintainer
  [PATCH] SPI: spi bounce buffer has a minimum length
  [PATCH] SPI: spi whitespace fixes
  [PATCH] SPI: add PXA2xx SSP SPI Driver
  [PATCH] SPI: per-transfer overrides for wordsize and clocking

Casting BE16 to int and back may or may not work. Correct, to be sure.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] arch/arm/kernel/dma-isa.c: named initializers
  [ARM] 3527/1: MPCore Boot Lockup Fix
  [ARM] arch/arm/kernel/process.c: Fix warning
  [ARM] 3526/1: ioremap should use vunmap instead of vfree on ARM
  [ARM] 3524/1: ARM EABI: more 64-bit aligned stack fixes
  [ARM] 3517/1: move definition of PROC_INFO_SZ from procinfo.h to asm-offsets.h

* master.kernel.org:/home/rmk/linux-2.6-serial:
  [ARM] 3523/1: Serial core pm_state

A single caller passes __u32. Inside function "net" is compared with
__u32 (__be32 really, just wasn't annotated).
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a potential jiffy wraparound bug in the transmit watchdog
that is easily avoided by using time_after().
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes two problems triggered by the MMC stack updating clocks:

 - SPI masters driver should accept a max clock speed of zero; that's one
   convention for marking idle devices.  (Presumably that helps controllers
   that don't autogate clocks to "off" when not in use.)

 - There are more than 1000 nanoseconds per millisecond; setting the clock
   down to 125 KHz now works properly.

Showing once again that Zero (http://en.wikipedia.org/wiki/Zero) is still
an inexhaustible number of bugs.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix two outstanding issues with the pxa2xx_spi driver:

1) Bad cast in the function u32_writer. Thanks to Henrik Bechmann
2) Adds support for per transfer changes to speed and bits per word
Signed-off-by: Stephen Street <stephen@streetfiresound.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>