- 23 May, 2008 21 commits
-
-
Ingo Molnar authored
disable the tracer while kexec pulls the rug from under the old kernel. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Steven Rostedt authored
Allocating large buffers for the tracer may fail easily. This patch converts the buffer from a large ordered allocation to single pages. It uses the struct page LRU field to link the pages together. Later patches may also implement dynamic increasing and decreasing of the trace buffers. Signed-off-by:
Steven Rostedt <srostedt@redhat.com> Signed-off-by:
-
Steven Rostedt authored
This patch adds two files to the debugfs system: /debugfs/tracing/available_filter_functions and /debugfs/tracing/set_ftrace_filter The available_filter_functions lists all functions that has been recorded by the ftraced that has called the ftrace_record_ip function. This is to allow users to see what functions have been converted to nops and can be enabled for tracing. To enable functions, simply echo the names (whitespace delimited) into set_ftrace_filter. Simple wildcards are also allowed. echo 'scheduler' > /debugfs/tracing/set_ftrace_filter Will have only the scheduler be activated when tracing is enabled. echo 'sched_*' > /debugfs/tracing/set_ftrace_filter Will have only the functions starting with 'sched_' be activated. echo '*lock' > /debugfs/tracing/set_ftrace_filter Will have only functions ending with 'lock' be activated. echo '*lock*' > /debugfs/tracing/set_ftrace_filter Will have only functions with 'lock' in its name be activated. Note: 'sched*lock' will not work. The only wildcards that are allowed is an asterisk and the beginning and or end of the string passed in. Multiple names can be passed in with whitespace delimited: echo 'scheduler *lock *acpi*' > /debugfs/tracing/set_ftrace_filter is also the same as: echo 'scheduler' > /debugfs/tracing/set_ftrace_filter echo '*lock' >> /debugfs/tracing/set_ftrace_filter echo '*acpi*' >> /debugfs/tracing/set_ftrace_filter Appending does just that. It appends to the list. To disable all filters simply echo an empty line in: echo > /debugfs/tracing/set_ftrace_filter Signed-off-by:
-
Steven Rostedt authored
This patch replaces the indirect call to the mcount function pointer with a direct call that will be patched by the dynamic ftrace routines. On boot up, the mcount function calls the ftace_stub function. When the dynamic ftrace code is initialized, the ftrace_stub is replaced with a call to the ftrace_record_ip, which records the instruction pointers of the locations that call it. Later, the ftraced daemon will call kstop_machine and patch all the locations to nops. When a ftrace is enabled, the original calls to mcount will now be set top call ftrace_caller, which will do a direct call to the registered ftrace function. This direct call is also patched when the function that should be called is updated. All patching is performed by a kstop_machine routine to prevent any type of race conditions that is associated with modifying code on the fly. Signed-off-by:
-
Steven Rostedt authored
This patch moves the memory management of the ftrace records out of the arch code and into the generic code making the arch code simpler. Signed-off-by:
-
Steven Rostedt authored
This patch patches the call to mcount with nops instead of a jmp over the mcount call. Signed-off-by:
-
Steven Rostedt authored
This patch adds back the sysctl ftrace_enabled. This time it is defaulted to on, if DYNAMIC_FTRACE is configured. When ftrace_enabled is disabled, the ftrace function is set to the stub return. If DYNAMIC_FTRACE is also configured, on ftrace_enabled = 0, the registered ftrace functions will all be set to jmps, but no more new calls to ftrace recording (used to find the ftrace calling sites) will be called. Signed-off-by:
-
Steven Rostedt authored
This patch adds a feature to dynamically replace the ftrace code with the jmps to allow a kernel with ftrace configured to run as fast as it can without it configured. The way this works, is on bootup (if ftrace is enabled), a ftrace function is registered to record the instruction pointer of all places that call the function. Later, if there's still any code to patch, a kthread is awoken (rate limited to at most once a second) that performs a stop_machine, and replaces all the code that was called with a jmp over the call to ftrace. It only replaces what was found the previous time. Typically the system reaches equilibrium quickly after bootup and there's no code patching needed at all. e.g. call ftrace /* 5 bytes */ is replaced with jmp 3f /* jmp is 2 bytes and we jump 3 forward */ 3: When we want to enable ftrace for function tracing, the IP recording is removed, and stop_machine is called again to replace all the locations of that were recorded back to the call of ftrace. When it is disabled, we replace the code back to the jmp. Allocation is done by the kthread. If the ftrace recording function is called, and we don't have any record slots available, then we simply skip that call. Once a second a new page (if needed) is allocated for recording new ftrace function calls. A large batch is allocated at boot up to get most of the calls there. Because we do this via stop_machine, we don't have to worry about another CPU executing a ftrace call as we modify it. But we do need to worry about NMI's so all functions that might be called via nmi must be annotated with notrace_nmi. When this code is configured in, the NMI code will not call notrace. Signed-off-by:
-
Steven Rostedt authored
Add preempt off timings. A lot of kernel core code is taken from the RT patch latency trace that was written by Ingo Molnar. This adds "preemptoff" and "preemptirqsoff" to /debugfs/tracing/available_tracers Now instead of just tracing irqs off, preemption off can be selected to be recorded. When this is selected, it shares the same files as irqs off timings. One can either trace preemption off, irqs off, or one or the other off. By echoing "preemptoff" into /debugfs/tracing/current_tracer, recording of preempt off only is performed. "irqsoff" will only record the time irqs are disabled, but "preemptirqsoff" will take the total time irqs or preemption are disabled. Runtime switching of these options is now supported by simpling echoing in the appropriate trace name into /debugfs/tracing/current_tracer. Signed-off-by:
-
Steven Rostedt authored
This patch adds latency tracing for critical timings (how long interrupts are disabled for). "irqsoff" is added to /debugfs/tracing/available_tracers Note: tracing_max_latency also holds the max latency for irqsoff (in usecs). (default to large number so one must start latency tracing) tracing_thresh threshold (in usecs) to always print out if irqs off is detected to be longer than stated here. If irq_thresh is non-zero, then max_irq_latency is ignored. Here's an example of a trace with ftrace_enabled = 0 ======= preemption latency trace v1.1.5 on 2.6.24-rc7 Signed-off-by: -
Steven Rostedt authored
This patch adds the tracer that tracks the wakeup latency of the highest priority waking task. "wakeup" is added to /debugfs/tracing/available_tracers Also added to /debugfs/tracing tracing_max_latency holds the current max latency for the wakeup wakeup_thresh if set to other than zero, a log will be recorded for every wakeup that takes longer than the number entered in here (usecs for all counters) (deletes previous trace) Examples: (with ftrace_enabled = 0) ============ preemption latency trace v1.1.5 on 2.6.24-rc8 Signed-off-by: -
Steven Rostedt authored
This patch adds context switch tracing, of the format of: _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | pid:prio:state \ / ||||| \ | / swapper-0 1d..3 137us+: 0:140:R --> 2912:120 sshd-2912 1d..3 216us+: 2912:120:S --> 0:140 swapper-0 1d..3 261us+: 0:140:R --> 2912:120 bash-2920 0d..3 267us+: 2920:120:S --> 0:140 sshd-2912 1d..3 330us!: 2912:120:S --> 0:140 swapper-0 1d..3 2389us+: 0:140:R --> 2847:120 yum-upda-2847 1d..3 2411us!: 2847:120:S --> 0:140 swapper-0 0d..3 11089us+: 0:140:R --> 3139:120 gdm-bina-3139 0d..3 11113us!: 3139:120:S --> 0:140 swapper-0 1d..3 102328us+: 0:140:R --> 2847:120 yum-upda-2847 1d..3 102348us!: 2847:120:S --> 0:140 "sched_switch" is added to /debugfs/tracing/available_tracers [ Eugene Teo <eugeneteo@kernel.sg: remove unused tracing_sched_switch_enabled ] Signed-off-by: -
Steven Rostedt authored
This is a simple trace that uses the ftrace infrastructure. It is designed to be fast and small, and easy to use. It is useful to record things that happen over a very short period of time, and not to analyze the system in general. Updates: available_tracers "function" is added to this file. current_tracer To enable the function tracer: echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer The output of the function_trace file is as follows "echo noverbose > /debugfs/tracing/iter_ctrl" preemption latency trace v1.1.5 on 2.6.24-rc7-tst Signed-off-by:Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by:
-
Steven Rostedt authored
This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: -
Arnaldo Carvalho de Melo authored
If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is set to a non-zero value the ftrace routine will be called everytime we enter a kernel function that is not marked with the "notrace" attribute. The ftrace routine will then call a registered function if a function happens to be registered. [ This code has been highly hacked by Steven Rostedt and Ingo Molnar, so don't blame Arnaldo for all of this ;-) ] Update: It is now possible to register more than one ftrace function. If only one ftrace function is registered, that will be the function that ftrace calls directly. If more than one function is registered, then ftrace will call a function that will loop through the functions to call. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Mark with "notrace" functions in core code that should not be traced. The "notrace" attribute will prevent gcc from adding a call to ftrace on the annotated funtions. Signed-off-by:
-
Steven Rostedt authored
Add the notrace annotations to the vsyscall functions - there we are not in kernel context yet, so the tracer function cannot (and must not) be called. Signed-off-by:
-
Ingo Molnar authored
notrace signals that a function should not be traced. Most of the time this is used by tracers to annotate code that cannot be traced - it's in a volatile state (such as in user vdso context or NMI context) or it's in the tracer internals. Signed-off-by:
-
Steven Rostedt authored
The tracer may need to call preempt_enable and disable functions for time keeping and such. The trace gets ugly when we see these functions show up for all traces. To make the output cleaner this patch adds preempt_enable_notrace and preempt_disable_notrace to be used by tracer (and debugging) functions. Signed-off-by:
-
Steven Rostedt authored
The tracer wants to be able to convert the state number into a user visible character. This patch pulls that conversion string out the scheduler into the header. This way if it were to ever change, other parts of the kernel will know. Signed-off-by:
-
Ingo Molnar authored
add 3 lightweight callbacks to the tracer backend. zero impact if tracing is turned off. Signed-off-by:
-
- 22 May, 2008 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Fix reversed memset arguments Adds username in the upcall key for unattended mounts with keytab [CIFS] Remove redundant NULL check
-
Dave Jones authored
Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
Steve French <sfrench@us.ibm.com>
-
Igor Mammedov authored
Signed-off-by:
Igor Mammedov <niallain@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: The world is not perfect patch. tcp: Make prior_ssthresh a u32 xfrm_user: Remove zero length key checks. net/ipv4/arp.c: Use common hex_asc helpers cassini: Only use chip checksum for ipv4 packets. tcp: TCP connection times out if ICMP frag needed is delayed netfilter: Move linux/types.h inclusions outside of #ifdef __KERNEL__ af_key: Fix selector family initialization. libertas: Fix ethtool statistics mac80211: fix NULL pointer dereference in ieee80211_compatible_rates mac80211: don't claim iwspy support orinoco_cs: add ID for SpeedStream wireless adapters hostap_cs: add ID for Conceptronic CON11CPro rtl8187: resource leak in error case ath5k: Fix loop variable initializations
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Prevent stack backtrace false positives on trap frames. sparc64: Fix stack tracing through trap frames. sparc64: Fix kernel thread stack termination. sunhv: Fix locking in non-paged I/O case.
-
David S. Miller authored
When we fully commit to returning back to kernel mode from a trap, zero out the regs->magic value to prevent false positives during stack backtraces. Signed-off-by:David S. Miller <davem@davemloft.net>
-
Steve French authored
Noticed by Coverity checker. Signed-off-by: -
David S. Miller authored
The offset to the pt_regs area was wrong, so we weren't looking at the right location for the magic cookie. A trap frame is composed of a "struct sparc_stackf" then a "struct pt_regs", the code was using "struct reg_window" instead of "struct sparc_stackf". Signed-off-by: -
David S. Miller authored
Because of the silly way I set up the initial stack for new kernel threads, there is a loop at the top of the stack. To fix this, properly add another stack frame that is copied from the parent and terminate it in the child by setting the frame pointer in that frame to zero. Signed-off-by: -
Rami Rosen authored
Unless there will be any objection here, I suggest consider the following patch which simply removes the code for the -DI_WISH_WORLD_WERE_PERFECT in the three methods which use it. The compilation errors we get when using -DI_WISH_WORLD_WERE_PERFECT show that this code was not built and not used for really a long time. Signed-off-by:
Rami Rosen <ramirose@gmail.com> Signed-off-by:
-
Ilpo Järvinen authored
If previous window was above representable values of u16, strange things will happen if undo with the truncated value is called for. Alternatively, this could be fixed by some max trickery but that would limit undoing high-speed undos. Adds 16-bit hole but there isn't anything to fill it with. Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
-
David S. Miller authored
The crypto layer will determine whether that is valid or not. Suggested by Herbert Xu, based upon a report and patch by Martin Willi. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Denis Cheng authored
Here the local hexbuf is a duplicate of global const char hex_asc from lib/hexdump.c, except the hex letters' cases: const char hexbuf[] = "0123456789ABCDEF"; const char hex_asc[] = "0123456789abcdef"; and here to print HW addresses, the hex cases are not significant. Thanks to Harvey Harrison to introduce the hex_asc_hi/hex_asc_lo helpers. Signed-off-by:
Denis Cheng <crquan@gmail.com> Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
David S. Miller authored
According to David Monro, at least with Natsemi Saturn chips the cassini driver has some trouble with ipv6 checksums. Until we have more information about what's going on here, only use the chip checksums for ipv4. This workaround was suggested and tested by David. Update version and release date. Signed-off-by:
-
- 21 May, 2008 5 commits
-
-
Al Viro authored
driver uses symbols defined only on ARM Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
Whether we sidestep it in init/main.c or not, such situations will arise again; compiler does generate calls of strcat() on optimizations, so we really ought to have an out-of-line version... Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
... and we have few enough places using the latter to make it simpler to do search and replace... Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
