- 30 Aug, 2007 28 commits
-
-
David Brownell authored
GPMC updates: - bugfixes: wrong/missing flags, omitted write, wrong test - don't map memory segments starting at zero - improve debug messaging - export gpmc_get_fclk_perio]d() since it's needed to calc timings - expect gpmc_cs_set_timings() caller to have initialized sync vs async Note that this API is glitchy; likely the best fix would be to add a member to "struct gpmc_timings" to hold GPMC_CONFIG1, since that holds one key aspect of the GPMC timings (the gpmc_fclk divisor, and sync vs. async == whether that divisor matters). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
David Brownell authored
Remove some conflicting declarations in omap2/memory.c so that the file builds again. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Kyungmin Park authored
Update Apollon board init to initialize NAND, USB, and LEDs. Also configure GPMC memory for smc91x Ethernet. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Juha Yrjola authored
Use virtual addresses directly instead of physical addresses to avoid having to recalculate the virtual address with every register access. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Juha Yrjola authored
Place SMS and SDRC into smart idle mode Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Eduardo Valentin authored
This is an updated patch to fix lcd for H2 board. It uses platform_data field to pass spi_device to lcd driver. Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Imre Deak authored
H2 / H3 boards use this chip, update their board files. Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Imre Deak authored
These were left out from the board file when merging these drivers, add them here. Call GPIO init from the board file as well, since the platform device init code uses the GPIO API. Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
David Brownell authored
Mistral-specific: - Add PWL-driven LCD backlight device - Apply power to the board even when the LCD isn't configured; things like EEPROM, temperature sensor, and wakeup switch depend on it. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
Add omap osk defconfig Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
Update omap h2 defconfig Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
This patch syncs omap board specific files with linux-omap tree. Patch consists mostly of driver updates done in linux-omap tree for drivers not yet in mainline kernel. Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Vladimir Ananiev authored
This adds basic support for Siemens SX1. More patches are available, with video driver, mixer, and serial ports working. That is enough to do gsm calls with right userland. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Marek Vasut authored
This patch adds board file and necessary includes for Palm Tungsten|T. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Andrzej Zaborowski authored
Add palmte board config bits for TSC2102 controlled devices. This will enable touchscreen, audio and APM code to report battery level. If there are other boards at some point that use a TSC2102, similar code can be used. Signed-off-by: Andrzej Zaborowski <balrog@zabor.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Marek Vasut authored
Palmz71 specific things - board file. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Jonathan McDowell authored
This adds support for the keypad on the top of the Amstrad Delta. It's just a standard omap-keypad so all we need to do is add the keypad layout and platform data to the board definition file. Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Andrzej Zaborowski authored
General update of the board file for Palm Tungsten E. Registers the platform devices contained in the PDA (ROM chip, keypad, infra-red) and updates the configuration for USB and MMC, whose config values were previously guessed in most cases due to lack of documentation (and now are confirmed by a number of users). Macros for GPIO pins are moved to a file in include/asm-arm/arch-omap. Signed-off-by: Andrzej Zaborowski <balrog@zabor.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Imre Deak authored
The SoSSI driver should already take care of this by enabling / disabling its clock when necessary, so this legacy callout from the PM idle code is not needed any more. Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Imre Deak authored
This is needed, so that disabling the SoSSI clock during idle can be prevented. Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
David Brownell authored
Support the camera connector on the OSK Mistral add-on board: - define muxing for both camera controllers - mux both of them for Mistral - teach ov9640 glue about mistral powerup/powerdown Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Marek Vasut authored
This patch enables some clock on omap310. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Juha Yrjola authored
Enable serial idling and wakeup features Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Juha Yrjola authored
The APLLs are most efficiently idled by hardware. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Dirk Behme authored
Signed-off-by: Dirk Behme <dirk.behme@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
David Brownell authored
Bugfixes for the OSK led support: - Fix Kconfig merge glitches: Mistral handles idle and timer leds just fine - Fix pm_suspend() runtime botch: can't sleep, so can't touch tps65010 leds Improvements: - Switch sense of Mistral idle led, so idle == off Probably the TPS65010 leds should be handled only by the "new led" API. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
David Brownell authored
Remove the OMAP1 version of omap_dm_timer_get_fclk(), and its associated compile-time warning. It would only BUG() if called, while it's only called on OMAP2. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Kevin Hilman authored
Fix unsupported one-shot mode in set_mode hook. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- 28 Aug, 2007 1 commit
-
-
Linus Torvalds authored
-
- 27 Aug, 2007 11 commits
-
-
Andrew Vasquez authored
Without this, we get qla2xxx complaining about "ISP System Error". What's happening here is the firmware is detecting a Xfer-ready from the storage when in fact the data-direction for a mode-select should be a write (DATA_OUT). The following patch fixes the problem (typo). Verified by Brian, as well. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Verified-by: Brian De Wolf <bldewolf@csupomona.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC32]: Make flush_tlb_kernel_range() an inline function. [SERIAL]: Fix 32-bit warnings in sunzilog.c and sunsu.c [SPARC32]: Kill unused vars and macros from prom/console.c [SPARC32]: Add __cmpdi2() libcall implementation ala. MIPS. [VIDEO]: Do not prom_halt() in cg3 and bw2 device probe. [SUNVDC]: Use slice 0xff on VD_DISK_TYPE_DISK.
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NET]: Mark Paul Moore as maintainer of labelled networking. [VLAN/BRIDGE]: Fix "skb_pull_rcsum - Fatal exception in interrupt" [ISDN]: Get rid of some pointless allocation casts in common and bsd comp. [NET]: Avoid pointless allocation casts in BSD compression module [IRDA]: Do not do pointless kmalloc return value cast in KingSun driver [NET]: Fix crash in dev_mc_sync()/dev_mc_unsync() [PPPOL2TP]: Fix endianness annotations. [IOAT]: ioatdma needs to to play nice in a multi-dma-client world [SLIP]: trivial sparse warning fix [EQL]: sparse warning fix [NET]: is_power_of_2 in net/core/neighbour.c [TCP]: Describe tcp_init_cwnd() thoroughly in a comment. [NET]: Fix IP_ADD/DROP_MEMBERSHIP to handle only connectionless [KBUILD]: Sanitize tc_ematch headers. [IPSEC] AH4: Update IPv4 options handling to conform to RFC 4302.
-
Hugh Dickins authored
Fix bogus DEBUG_PREEMPT warning on x86_64, when cpu brought online after bootup: current_is_keventd is right to note its use of smp_processor_id is preempt-safe, but should use raw_smp_processor_id to avoid the warning. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Sigh. Again an ACPI assault on the Thinkpad's Fn+F4 to suspend to RAM. The default and text for CONFIG_THINKPAD_ACPI_INPUT_ENABLED were fixed in -rc3, but now commit 14e04fb3 ("ACPI: Schedule /proc/acpi/event for removal") introduces the ACPI_PROC_EVENT config entry, and defaults it to 'n' to disable it again. Change default to y, and add comment to make it clearer that n is for future distros. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Len Brown <len.brown@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Commit 61ec7567 ('ACPI: boot correctly with "nosmp" or "maxcpus=0"') broke 'maxcpus=' handling on x86[-64]. maxcpus=N is now having no effect on x86_64, and freezing bootup on i386 (because of inconsistency with the separate maxcpus parsing down in arch/i386, I guess). That's because early_param parsing is a little different from __setup parsing, and needs the "=" omitted: then it seems to work as the original commit intended (no mention of IO-APIC in /proc/interrupts when maxcpus=0). Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Len Brown <len.brown@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (60 commits) [MIPS] Fulong doesn't need ISA DMA. [MIPS] IP27: intr_sconnect_level: don't disable interrupts. [MIPS] IP27: startup_bridge_irq: connect interrupt. [MIPS] IP27: shutdown_bridge_irq: don't free irq. [MIPS] Sort out handling of ISA-less PCI systems. [MIPS] Add __cmpdi2 [MIPS] HOTPLUG: Make register_pci_controller __devinit. [MIPS] PCI: Remove __devinit attribute from pcibios_fixup_bus. [MIPS] PCI: Remove __devinit attribute from pcibios_fixup_bus. [MIPS] Delete duplicate inclusion of <linux/delay.h>. [MIPS] Polish <asm/edac.h>. [MIPS] IP22: Export sgi_gfxaddr for use by the Newport console driver. [MIPS] Maintain si_code field properly for FP exceptions [MIPS] SMTC: Fix duplicate status dumps on NMI [MIPS] Unconditionally writeback and invalidate caches on kexec. [PATCH] rtc: Make rtc-rs5c348 driver hotplug-aware [MIPS] Fix gcc 3.3 warning. [MIPS] Fix invalid semicolon after if statement [MIPS] Update Cobalt defconfig [MIPS] Update workpad_defconfig ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix SLB initialization at boot time [POWERPC] Fix undefined reference to device_power_up/resume [POWERPC] cell: Update cell_defconfig for 2.6.23 [POWERPC] axonram: Do not delete gendisks queue in error path [POWERPC] axonram: Module modification for latest firmware API changes [POWERPC] cell: Support pinhole-reset on IBM cell blades [POWERPC] spu_manage: Use newer physical-id attribute [POWERPC] pasemi: Another IOMMU bugfix for 64K PAGE_SIZE
-
git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6Linus Torvalds authored
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: [PARISC] Add NOTES section [PARISC] Use compat_sys_getdents [PARISC] Do not allow STI_CONSOLE to be modular [PARISC] Clean up sti_flush [PARISC] Add dummy isa_(bus|virt)_to_(virt|bus) inlines [PARISC] Add empty <asm-parisc/vga.h>
-
Kyle McMartin authored
Bisected bizarre kernel-space nullptr dereference in udev to commit 18991197, adding the NOTES section fixes it. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-
Kyle McMartin authored
Switch to using the generic compat_sys_getdents instead of a homebrew one. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
-