- 03 Dec, 2009 2 commits
- 01 Dec, 2009 29 commits
-
-
arnaud.patard@rtp-net.org authored
Better using standard interfaces to enable/disable bluetooth Signed-off-by:
Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by:
Ben Dooks <ben-linux@fluff.org>
-
arnaud.patard@rtp-net.org authored
Add lcd and backlight device definition. The pwm backlight stuff does not allow to really set maximum pwm as with my custom driver but it's better to use standard driver instead of out of tree driver. Signed-off-by:
-
arnaud.patard@rtp-net.org authored
Enable S3C2410 rtc on h1940 Signed-off-by:
-
arnaud.patard@rtp-net.org authored
Add mmc host support to h1940 Signed-off-by:
-
Ben Dooks authored
Fix mach-n30.c to use the s3c_i2c0_set_platdata() call to register the platform data with the system to get rid of any reliance on having a real device structure available in memory. Since s3c_i2c0_set_platdata() copies the data, mark the original as __initdata so it is thrown away. Signed-off-by: -
Ben Dooks authored
The AT2440EVB should not be changing the s3c_device_sdi.name as this is part of the initialisation process done by the CPU detection process and actually present in arch/arm/plat-s3c24xx/s3c24xx.c. Signed-off-by: -
Ben Dooks authored
-
Ben Dooks authored
The mach-h1940.c file was using s3c_device_ where it really should be calling these local definitions h1940_device to ensure they are not mistaken for real s3c_devices when the device change is done. Signed-off-by: -
Ben Dooks authored
There are a number of statements of the form A, B or A, B, C where the numbers A,B,C are not consecutive. However, referencing [1] it is the correct thing to replace these with A-B or A-C as apropriate. [1] http://www.copyrightservice.co.uk/copyright/p03_copyright_notices section 4iii 'Year of publication' Signed-off-by:
Ben Dooks <ben@simtec.co.uk> Signed-off-by:
Simtec Linux Team <linux@simtec.co.uk> Signed-off-by:
-
Ben Dooks authored
There are a number of statements of the form A, B or A, B, C where the numbers A,B,C are consecutive. Tidy these up to be A-B or A-C as appropriate and to comply better with copyright standards [1] [1] http://www.copyrightservice.co.uk/copyright/p03_copyright_notices section 4iii 'Year of publication' Signed-off-by:
-
Ben Dooks authored
The (c) alone is not a sufficient copyright statement, nor is it a good replacement for the proper encircled © symbol [1]. Add the word copyright to the apropriate places and remove the (c) symbol. [1] http://www.copyrightservice.co.uk/copyright/p03_copyright_notices section 4 'What does a notice consist of?' Signed-off-by:
-
Ben Dooks authored
Add documentation for the platform data structure in the SD/MMC driver header file arch/arm/plat-s3c24xx/include/plat/mci.h. Signed-off-by:
-
Ben Dooks authored
Add a driver to provide DVS for the Simtec Osiris module to reduce the power consumption whilst idling. The DVS driver alters the voltage supplied to the ARM core depending on the frequency it is running at. The driver itself does not do any of the frequency alteration, which is left up to the cpufreq driver. Signed-off-by:
-
Ben Dooks authored
Add the platform/machine support for the audio devices fitted to the Simtec range of boards since the move to ASoC. Signed-off-by:
-
Kyungmin Park authored
Add required machine definitions for SDHCI controller 0, 1 and 2. SMDKC100 has 2 SDHCI/MMC ports. Port 1 is directly connected to controller 0. Port 1 can be conntected to controler 1 or 2, depending on jumper setup. Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Kyungmin Park authored
Samsung S5PC100 has 3 SDHCI controllers compatible with the one known from previous SoCs series. Add required platform setup and support code that the devices can be used with sdhci-s3c driver. Signed-off-by:
-
Kyungmin Park authored
Add required machine definitions for I2C 0 and 1 bus controllers. Currently no I2C device are defined yet. Signed-off-by:
-
Kyungmin Park authored
Samsung S5PC100 has I2C bus controller compatible with the one known from previous SoCs series. Add required platform setup and support code that it can be used with s3c2410-i2c driver. Signed-off-by:
-
Kyungmin Park authored
Add required machine definitions for s3c-fb device. A 800x480 lcd device (simmilar to the one known from SMDK6410 boards) has been defined. The lcd controller is attached to GPIO lines and can be enabled/disabled with platform-lcd driver. Signed-off-by:
-
Pawel Osciak authored
Samsung S5PC100 has LCD-controller compatible with the one known from previous SoCs series. Add required platform setup and support code that it can be used with s3c-fb driver. Signed-off-by:
Pawel Osciak <p.osciak@samsung.com> Signed-off-by:
-
Pawel Osciak authored
S5PC1xx Samsung SOC series has very similar frame buffer hardware, so a lot of the code can be shared. Moved s3c64xx-specific s3c-fb register definitions from mach-s3c6400 to common platform directory as regs-fb-v4.h. The new v4 file will be common for S3C6400, S3C6410, S5PC100 and possibly others. Some s3c64xx series specific defines (palette handling) were left in s3c-6400/mach/regs-fb.h, because it is handled differently in S5PC1xx series. Signed-off-by:
-
Kyungmin Park authored
Add CPU idle support by a call to SoC build-in power management core. Add system reset support by a simple write to system controll register. Signed-off-by:
-
Kyungmin Park authored
Add support for gpiolib calls. This is based on the gpiolib implementation from plat-s3c64xx tree. Add support for external interrupts for GPIO H banks. Add support for GPIO interrupts for all banks. Signed-off-by:
-
Kyungmin Park authored
S5PC100 and S5PC110 GPIO registers differs in many places, rename all previously defined registers to be S5PC100 specific. Signed-off-by:
-
Kyungmin Park authored
Add GPIO L0-L4 banks to register definition. Signed-off-by:
-
Kyungmin Park authored
Clocks hierarchy has been completely reimplemented to match the S5PC100 specification. Signed-off-by:
-
Kyungmin Park authored
S5PC100 and S5PC110 clock registers differs in many places, rename all previously defined registers to be S5PC100 specific. Remove all power management registers. They will be added later to a separate file. Signed-off-by:
-
Kyungmin Park authored
S5PC110 and S5PC100 register maps differs in many places, rename all defined registers to be S5PC100 specific. PA_SYS register known from S3C64XX series has been renamed to more adequate PA_CLK. Also system map has been also updated to cover more integrated peripherals. Signed-off-by:
-
Ben Dooks authored
We inted to re-organise the plat-s3c/plat-s3c24xx/plat-s3c64xx into a more generic plat-samsung with less code in the other plat- directories to make it easier to port new devices and try and clear up some of the naming issues with newer devices. Start by creating a small arch/arm/plat-samsung with no actuall code in so we can move items in as we process them. Add this to arch/arm to allow it to build things once support is added. Signed-off-by:
-
- 13 Nov, 2009 1 commit
-
-
Linus Torvalds authored
-
- 12 Nov, 2009 8 commits
-
-
Linus Torvalds authored
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap3: Decrease cpufreq transition latency omap3: update Pandora defconfig omap3: 3430sdp: Enable Linux Regulator framework omap3: beagle: Fix USB host port power control omap3: pandora: Fix keypad keymap omap1: Amstrad Delta defconfig fixes omap: Fix omapfb/lcdc on OMAP1510 broken when PM set omap: Use resource_size omap: Fix race condition in omap dma driver
-
Mike Hommey authored
Because of an integer overflow on start_blk, various kind of wrong results would be returned by the generic_block_fiemap() handler, such as no extents when there is a 4GB+ hole at the beginning of the file, or wrong fe_logical when an extent starts after the first 4GB. Signed-off-by:
Mike Hommey <mh@glandium.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Eric Sandeen <sandeen@sgi.com> Cc: Josef Bacik <jbacik@redhat.com> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rodolfo Giometti authored
PPS events must be recorded according to PPS's mode settings. If a process asks for (i.e.) capture-assert events only, when the PPS client calls the pps_event() function to save the current PPS event, we should verify the event type and then discard unwanted ones. Also, without this patch userland processes waiting for a specific PPS event (assert or clear but not both) may be awakened at wrong time. Signed-off-by:
Rodolfo Giometti <giometti@linux.it> Tested-by:
William S. Brasher <billb958@door.net> Tested-by:
Reg Clemens <clemens@dwf.com> Cc: <stable@kernel.org> Signed-off-by:
-
Rodolfo Giometti authored
Userland programs may read/write PPS parameters at same time and these operations may corrupt PPS data. Signed-off-by:
-
Pavel Machek authored
TASK_INTERRUPTIBLE and friends are now only available after including <linux/sched.h>, so include it when needed. bus_id is no longer available/necessary, so remove that. Android pmem driver is not available in mainline, so remove its hooks from drivers/video. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Sergei Shtylyov authored
In case of failure, device_create() returns not NULL but the error code. The current code checks for non-NULL though which causes kernel oops in sysfs_create_group() when device_create() fails. Check for error using IS_ERR() and propagate the error value using PTR_ERR() instead of fixed -ENODEV code returned now... Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Scott Valentine authored
v3020_mmio_read_bit() always returns 0 when left_shift > 7. v3020_mmio_read_bit()'s return type is (unsigned char). The code returns a value masked by (1 << left_shift) that is casted to the return type. If left_shift is larger than 7, the cast will always result in a 0 return value. The problem was discovered with left_shift = 16, and the included patch corrects the problem. The bug was introduced in the last (Apr 3 2009) commit of the file, kernel versions 2.6.30 and later. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Raphael Assenat <raph@8d.com> Cc: <stable@kernel.org> Signed-off-by:
-
Yoichi Yuasa authored
drivers/rtc/rtc-vr41xx.c: In function 'vr41xx_rtc_irq_set_freq': drivers/rtc/rtc-vr41xx.c:217: warning: comparison of distinct pointer types lacks a cast drivers/rtc/rtc-vr41xx.c:217: warning: right shift count >= width of type drivers/rtc/rtc-vr41xx.c:217: warning: passing argument 1 of '__div64_32' from incompatible pointer type include/asm-generic/div64.h:35: note: expected 'uint64_t *' but argument is of type 'long unsigned int *' Signed-off-by:
Yoichi Yuasa <yuasa@linux-mips.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
