- 20 Mar, 2009 40 commits
-
-
Alex Chiang authored
Now that the PCI core is capable of function-level remove and rescan as well as bus-level rescan, there's no functional need to keep fakephp anymore. We keep it around for userspace compatibility reasons, schedule removal in three years. Signed-off-by:
Alex Chiang <achiang@hp.com> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org>
-
Alex Chiang authored
We wanted to replace fakephp wholesale, so rename legacy_fakephp back to fakephp. Yes, this is a silly commit, but it produces a much easier patch to read and review. Signed-off-by:
-
Trent Piepho authored
A complete re-implementation of fakephp is necessary if it is to present its former interface (pre-2.6.27, when it broke). The reason is that PCI hotplug drivers call pci_hp_register(), which enforces the rule that only one /sys/bus/pci/slots/ file may be created per physical slot. The change breaks the old fakephp's assumption that it could create a file per function. So we re-implement fakephp to avoid using the standard PCI hotplug API so that we can restore the old fakephp user interface. It puts entries in /sys/bus/pci/slots with the names of all PCI devices/functions, exactly symmetrical to what is shown in /sys/bus/pci/devices. Each slots/ entry has a "power" attribute, which works the same way as the fakephp driver's power attribute has worked. There are a few improvements over old fakephp, which couldn't handle PCI devices being added or removed via a means outside of fakephp's knowledge. If a device was added another way, old fakephp didn't notice and didn't create the fake slot for it. If a device was removed another way, old fakephp didn't delete the fake slot for it (and accessing the stale slot caused an oops). The new implementation overcomes these limitations. As a consequence, removing a bridge with other devices behind it now works as well, which is something else old fakephp couldn't do previously. This duplicates a tiny bit of the code in the PCI core that does this same function. Re-using that code ends up being more complex than duplicating it, and it makes code in the PCI core more ugly just to support this legacy fakephp interface compatibility layer. Reviewed-by:
James Cameron <qz@hp.com> Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Alex Chiang authored
This interface allows the user to force a rescan of the device's parent bus and all subordinate buses, and rediscover devices removed earlier from this part of the device tree. Cc: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Alex Chiang authored
This patch adds an attribute named "remove" to a PCI device's sysfs directory. Writing a non-zero value to this attribute will remove the PCI device and any children of it. Trent Piepho wrote the original implementation and documentation. Thanks to Vegard Nossum for testing under kmemcheck and finding locking issues with the sysfs interface. Cc: Trent Piepho <xyzzy@speakeasy.org> Tested-by:
Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by:
-
Alex Chiang authored
This interface allows the user to force a rescan of all PCI buses in system, and rediscover devices that have been removed earlier. pci_bus_attrs implementation from Trent Piepho. Thanks to Vegard Nossum for discovering locking issues with the sysfs interface. Cc: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Alex Chiang authored
This API is used by the PCI core to rescan a bus and rediscover newly added devices. Over time, it is expected that the various PCI hotplug drivers will migrate to this interface and away from the old pci_do_scan_bus() interface. Signed-off-by:
-
Alex Chiang authored
In preparation for PCI core hotplug, we need to ensure that we do not attempt to re-enable bridges that have already been enabled. Reported-by:
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by:
-
Alex Chiang authored
In preparation for PCI core hotplug, we need to ensure that we do not attempt to re-initialize bridges that have already been initialized. We only need to worry about non-root buses, since we will not allow root bus removal. Reported-by:
-
Alex Chiang authored
While scanning bridges, we stop our scan if we encounter a bus that we've seen before, to work around some buggy chipsets. This is a good idea, but prevents us from fully scanning the PCI bus at a future time (to find newly hot-added devices, for example). Change the logic so that we skip _re-adding_ an existing bus that we've seen before, but also allow the scan to descend to all child buses. Now that we're potentially scanning our child buses again, we also need to be sure not to attempt re-initializing their BARs so we avoid that. This patch lays the groundwork to allow the user to issue a rescan of the PCI bus at any time. Signed-off-by:
-
Trent Piepho authored
pci_scan_slot() has been rewritten to be less complex and will now return the number of *new* devices found. Existing callers need not worry because they already assume that they can't call pci_scan_slot() on an already-scanned slot. Thus, there is no semantic change for existing callers: returning newly found devices (this patch) is exactly equal to returning all found devices (before this patch). This patch adds some more groundwork to allow us to rescan the PCI bus during runtime to discover newly added devices. Signed-off-by:
-
Trent Piepho authored
pci_scan_single_device is supposed to add newly discovered devices to pci_bus->devices, but doesn't check to see if the device has already been added. This can cause problems if we ever want to use this interface to rescan the PCI bus. If the device is already added, just return it. Signed-off-by:
-
Kenji Kaneshige authored
Introduce pci_is_root_bus helper function. This will help make code more consistent, as well as prevent incorrect assumptions (such as pci_bus->self == NULL on a root bus, which is not always true). Signed-off-by:
-
Yinghai Lu authored
Fix mmconfig detection to not assume a single mmconfig space in the northbridge, paving the way for AMD fam10h + mcp55 CPUs. On those, the MSR has some range, but the mcp55 pci config will have another one. Also helps the mcp55 + io55 case, where every one will have one range. If it is mcp55, exclude the range that is used by CPU MSR, in other words , if the CPU claims busses 0-255, the range in mcp55 is dropped, because CPU HW will not route those ranges to mcp55 mmconfig to handle it. Signed-off-by:
Yinghai Lu <yinghai.lu@kernel.org> Signed-off-by:
-
Michael Ellerman authored
Encourage driver writers to think about supporting a variable number of MSI-X interrupts, and give an example of how to do such a request. Acked-by:
Matthew Wilcox <willy@linux.intel.com> Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Ed Swierk authored
Detect and enable memory-mapped PCI configuration space on the nVidia MCP55 southbridge. Tested against 2.6.27.4 on an Arista Networks development board with one MCP55, Coreboot firmware, no ACPI. Signed-off-by:
Ed Swierk <eswierk@aristanetworks.com> Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Yu Zhao authored
Reviewed-by:
Randy Dunlap <rdunlap@xenotime.net> Reviewed-by:
Yu Zhao <yu.zhao@intel.com> Signed-off-by:
-
Yu Zhao authored
Reviewed-by:
-
Yu Zhao authored
Add or remove a Virtual Function after receiving a Migrate In or Out Request. Reviewed-by:
-
Yu Zhao authored
Add or remove the Virtual Function when the SR-IOV is enabled or disabled by the device driver. This can happen anytime rather than only at the device probe stage. Reviewed-by:
-
Yu Zhao authored
Move the device setup stuff into pci_setup_device() which will be used to setup the Virtual Function later. Reviewed-by:
-
Yu Zhao authored
Reserve the bus number range used by the Virtual Function when pcibios_assign_all_busses() returns true. Reviewed-by:
-
Yu Zhao authored
Restore the volatile registers in the SR-IOV capability after the D3->D0 transition. Reviewed-by:
-
Yu Zhao authored
If a device has the SR-IOV capability, initialize it (set the ARI Capable Hierarchy in the lowest numbered PF if necessary; calculate the System Page Size for the VF MMIO, probe the VF Offset, Stride and BARs). A lock for the VF bus allocation is also initialized if a PF is the lowest numbered PF. Reviewed-by:
-
David O'Shea authored
On the Compaq Evo D510 SFF/CMT, a PCI quirk activated the SMBus device based on detection of the on-board VGA controller, but the on-board VGA is disabled if an AGP card is inserted, so look for one of the USB controllers instead. Signed-off-by:
David O'Shea <dcoshea@hotmail.com> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Dave Airlie authored
X really would like to know which VGA device was considered the boot device by the system. The x86 PCI fixups have support for discovering this but we provide no way to expose it to userspace. This adds a sysfs file per VGA class device which has the value 0 for non the boot device or unknown, and 1 if the VGA device is the boot device. Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Yinghai Lu authored
Many host bridges support a 4k config space, so check them directy instead of using quirks to add them. We only need to do this extra check for host bridges at this point, because only host bridges are known to have extended address space without also having a PCI-X/PCI-E caps. Other devices with this property could be done with quirks (if there are any). As a bonus, we can remove the quirks for AMD host bridges with family 10h and 11h since they're not needed any more. With this patch, we can get correct pci cfg size of new Intel CPUs/IOHs with host bridges. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Reviewed-by:
-
Alex Chiang authored
The PCIe port driver calls pci_enable_device when registering ports, but never calls pci_disable_device during removal. Acked-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
Alex Chiang authored
Commit 55633af3 (PCIe portdrv: Use driver data to simplify code) added a kfree of the driver private data in pcie_port_device_remove but forgot to remove the old kfree from pcie_portdrv_remove. Acked-by:
-
Geert Uytterhoeven authored
Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Yuji Shimada authored
This patch allows memory resources to be assigned with a specified alignment at boot-time or run-time. The patch is useful when we use PCI pass-through, because page-aligned memory resources are required to securely share PCI resources with guest drivers. If you want to assign the resource at boot time, please set "pci=resource_alignment=" boot parameter. This is format of "pci=resource_alignment=" boot parameter: [<order of align>@][<domain>:]<bus>:<slot>.<func>[; ...] Specifies alignment and device to reassign aligned memory resources. If <order of align> is not specified, PAGE_SIZE is used as alignment. PCI-PCI bridge can be specified, if resource windows need to be expanded. This is example: pci=resource_alignment=20@07:00.0;18@0f:00.0;00:1d.7 If you want to assign the resource at run-time, please set "/sys/bus/pci/resource_alignment" file, and hot-remove the device and hot-add the device. For this purpose, fakephp or PCI hotplug interfaces can be used. The format of "/sys/bus/pci/resource_alignment" file is the same with boot parameter. You can use "," instead of ";". For example: # cd /sys/bus/pci # echo -n 20@12:00.0 > resource_alignment # echo 1 > devices/0000:12:00.0/remove # echo 1 > rescan Reviewed-by:Yuji Shimada <shimada-yxb@necst.nec.co.jp> Signed-off-by:
-
Matthew Wilcox authored
Add the new API pci_enable_msi_block() to allow drivers to request multiple MSI and reimplement pci_enable_msi in terms of pci_enable_msi_block. Ensure that the architecture back ends don't have to know about multiple MSI. Signed-off-by:
-
Matthew Wilcox authored
Since most of the callers already know whether they have an MSI or an MSI-X capability, split msi_set_mask_bits() into msi_mask_irq() and msix_mask_irq(). The only callers which don't (mask_msi_irq() and unmask_msi_irq()) can share code in msi_set_mask_bit(). This then becomes the only caller of msix_flush_writes(), so we can inline it. The flushing read can be to any address that belongs to the device, so we can eliminate the calculation too. We can also get rid of maskbits_mask from struct msi_desc and simply recalculate it on the rare occasion that we need it. The single-bit 'masked' element is replaced by a copy of the 32-bit 'masked' register, so this patch does not affect the size of msi_desc. Signed-off-by:
-
Matthew Wilcox authored
MSI interrupts have a mask_pos where MSI-X have a mask_base. Use a transparent union to get rid of some ugly casts. Signed-off-by:
-
Matthew Wilcox authored
By passing the pci_dev into alloc_msi_entry() we can be sure that the ->dev entry is always assigned and so we don't need to check it. Also, we used kzalloc() so we don't need to initialise ->irq to 0. Signed-off-by:
-
Matthew Wilcox authored
By changing from a 5-bit field to a 1-bit field, we free up some bits that can be used by a later patch. Also rearrange the fields for better packing on 64-bit platforms (reducing the size of msi_desc from 72 bytes to 64 bytes). Signed-off-by:
-
Matthew Wilcox authored
I didn't find the previous version very useful, so I rewrote it. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Reviewed-by:
Grant Grundler <grundler@parisc-linunx.org> Signed-off-by:
-
Chris Wright authored
This adds a remove_id sysfs entry to allow users of new_id to later remove the added dynid. One use case is management tools that want to dynamically bind/unbind devices to pci-stub driver while devices are assigned to KVM guests. Rather than having to track which driver was originally bound to the driver, a mangement tool can simply: Guest uses device Signed-off-by:
Chris Wright <chrisw@sous-sol.org> Signed-off-by:
-
Bjorn Helgaas authored
This patch changes a VIA PCI quirk to use dev_info() rather than printk(). Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgek.org>
-
Yu Zhao authored
Reviewed-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
-
