This is a simple copy&paste from slub.c:

- lockdep annotation
- might sleep annotation
- fault injection

CC: Nick Piggin <nickpiggin@yahoo.com.au>
CC: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

Correctly return value for notification handler. The bug causes other
handlers are ignored and panic kernel.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

Sebastian discovered that SLQB can enable interrupts early in boot due
to taking the rwsem. It should not be contended here, so XADD algorithm
implementations should not be affected, however spinlock algorithm
implementations do a spin_lock_irq in down_write fastpath and would be
affected.

Move the lock out of early init path, comment why. This also covers
a very small (and basically insignificant) race where kmem_cache_create_ok
checks succeed but kmem_cache_create still creates a duplicate named
cache because the lock was dropped and retaken.
Reported-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Tested-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

SLQB would return ZERO_SIZE_PTR rather than NULL if the requested size is too
large. Debugged by Heiko Carstens. Fix this by checking size edge cases up
front rather than in the slab index calculation.

Additionally, if the size parameter was non-constant and too large, then
the checks may not have been performed at all which could cause corruption.

Next, ARCH_KMALLOC_MINALIGN may not be obeyed if size is non-constant. So
test for KMALLOC_MIN_SIZE in that case.

Finally, if KMALLOC_SHIFT_SLQB_HIGH is larger than 2MB, then kmalloc_index
could silently run off the end of its precomputed table and return a -1
index into the kmalloc slab array, which could result in corruption. Extend
this to allow up to 32MB (to match SLAB), and add a compile-time error in
the case that the table is exceeded (also like SLAB).
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

Commit dcce284a ("mm: Extend gfp masking to the
page allocator") introduced a global 'gfp_allowed_mask' for masking GFP flags.
Use that in SLQB to fix a compilation error.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

The slab allocator is set up much earlier in the boot sequence now so the
allocator must be able to support GFP_KERNEL allocations when interrupts are
not enabled yet.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

As explained by Minchan Kim, we need to hold ->page_lock while updating
l->nr_partial in slab_alloc_page() and __cache_list_get_page().
Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Analyzed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

Documentation/vm/slqbinfo.c:386: warning: unused variable 'total'
Documentation/vm/slqbinfo.c:512: warning: format '%5d' expects type 'int', but argument 9 has type 'long unsigned int'
Documentation/vm/slqbinfo.c:520: warning: format '%4ld' expects type 'long int', but argument 9 has type 'int'
Documentation/vm/slqbinfo.c:646: warning: unused variable 'total_partial'
Documentation/vm/slqbinfo.c:646: warning: unused variable 'avg_partial'
Documentation/vm/slqbinfo.c:645: warning: unused variable 'max_partial'
Documentation/vm/slqbinfo.c:645: warning: unused variable 'min_partial'
Documentation/vm/slqbinfo.c:860: warning: unused variable 'count'
Documentation/vm/slqbinfo.c:858: warning: unused variable 'p'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

x86_64 allnoconfig:

mm/slqb.c: In function 'slab_alloc':
mm/slqb.c:1546: warning: passing argument 3 of 'alloc_debug_processing' makes pointer from integer without a cast
mm/slqb.c: In function 'slab_free':
mm/slqb.c:1764: warning: passing argument 3 of 'free_debug_processing' makes pointer from integer without a cast

Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

SLQB does not correctly account reclaim_state.reclaimed_slab, so it will
break memory reclaim. Account it like SLAB does.

Cc: stable@kernel.org
Cc: linux-mm@kvack.org
Cc: Matt Mackall <mpm@selenic.com>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

This patch cleans up SQLB to make the code checkpatch clean.
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

This patch changes SLQB to use the shorter _RET_IP_ form for consistency
with SLUB and to prepare SLQB for eventual kmemtrace hooks.
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

The dumb early allocation cache had a bug where it could allow allocation
to go past the end of a page, which could cause crashes or random memory
corruption. Fix this and simplify the logic.

[ penberg@cs.helsinki.fi: fix whitespace issues pointed out by Anton Vorontsov]
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

SLQB didn't consider MAX_ORDER when defining which sizes of kmalloc
slabs to create. It panics at boot if it tries to create a cache
which exceeds MAX_ORDER-1.

The patch fixes PowerPC boot failures discussed here:

  http://lkml.org/lkml/2009/4/28/198Reported-by: Sachin Sant <sachinp@in.ibm.com>
Tested-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

SLQB fails to build without -O, which causes some external code to trip
over. This BUILD_BUG_ON isn't so useful anyway because it is trivial to
follow that size will be constant, looking at the callers.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

Slabs may not be allocated at MAX_ORDER or higher.

Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

This patch fixes the following build breakage which happens when CONFIG_NUMA is
enabled but CONFIG_SMP is disabled:

    CC      mm/slqb.o
  mm/slqb.c: In function '__slab_free':
  mm/slqb.c:1735: error: implicit declaration of function 'slab_free_to_remote'
  mm/slqb.c: In function 'kmem_cache_open':
  mm/slqb.c:2274: error: implicit declaration of function 'kmem_cache_dyn_array_free'
  mm/slqb.c:2275: warning: label 'error_cpu_array' defined but not used
  mm/slqb.c: In function 'kmem_cache_destroy':
  mm/slqb.c:2395: error: implicit declaration of function 'claim_remote_free_list'
  mm/slqb.c: In function 'kmem_cache_init':
  mm/slqb.c:2885: error: 'per_cpu__kmem_cpu_nodes' undeclared (first use in this function)
  mm/slqb.c:2885: error: (Each undeclared identifier is reported only once
  mm/slqb.c:2885: error: for each function it appears in.)
  mm/slqb.c:2886: error: 'kmem_cpu_cache' undeclared (first use in this function)
  make[1]: *** [mm/slqb.o] Error 1
  make: *** [mm] Error 2

As x86 Kconfig doesn't even allow this combination, one is tempted to
think it's an architecture Kconfig bug. But as it turns out, it's a
perfecly valid configuration. Tony Luck explains:

  UP + NUMA is a special case of memory-only nodes.  There are some (crazy?)
  customers with problems that require very large amounts of memory, but not very
  much cpu horse power.  They buy large multi-node systems and populate all the
  nodes with as much memory as they can afford, but most nodes get zero cpus.

So lets fix that up.

[ tony.luck@intel.com: #ifdef cleanups ]
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

Yanmin Zhang had reported performance increases in a routing stress test
with SLUB using gigantic slab sizes. The theory is either increased TLB
efficiency or reduced page allocator costs. Anyway it is trivial and
basically no overhead to add similar parameters to SLQB to experiment with.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

SLQB has a design flaw noticed by Yanmin Zhang when doing network packet
stress testing.

My intention with lockless slab lists had been to try to balance
producer/consumer type activity on the object queues just at allocation-time
with the producer and free-time with the consumer. But that breaks down if you
have a huge number of objects in-flight and then free them after activity is
reduced at the producer-side.

Basically just objects being allocated on CPU0 are then freed by CPU1 but then
rely on activity from CPU0 (or periodic trimming) to free them back to the page
allocator. If there is infrequent activity on CPU0, then it can take a long
time for the periodic trimming to free up unused objects.

Fix this by adding a lock to the page list queues and allowing CPU1 to do the
freeing work synchronously if queues get too large. It allows "nice"
producer/consumer type patterns to still fit within the fast object queues,
without the possibility to build up a lot of objects... The spinlock should
not be a big problem for nice workloads, as it is at least an order of
magnitude less frequent than an object allocation/free operation.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

gather_stats is not used if CONFIG_SLQB_SYSFS is not selected. Make
it conditional and avoid the warning.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

flush_free_list can be called with interrupts enabled, from
kmem_cache_destroy. Fix this.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

struct slqb_page defines struct rcu_head rcu_head for rcu,
the rcu callback should use it.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

My virt_to_page_fast speedup for x86-64 snuck in to the slqb patch, where it
does not belong. Oops.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

Fix the lockdep error reported by Fengguang where down_read slqb_lock
is taken twice when reading /proc/slabinfo, with the possibility for a
deadlock.
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Tested-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

As reported by Stephen Rothwell:

  Today's linux-next build (powerpc allnoconfig) produced this warning:

  mm/slqb.c: In function 'kmem_cache_open':
  mm/slqb.c:2180: warning: label 'error_lock' defined but not used
  mm/slqb.c:2176: warning: label 'error_cpu_array' defined but not used

  Caused by commit 8b9ffd9d52479bd17b5729c9f3acaefa90c7e585 ("slqb: dynamic
  array allocations").

  Clearly neither CONFIG_SMP not CONFIG_NUMA is set.

Fix those up by wrapping the labes in ifdef CONFIG_SMP and CONFIG_NUMA where
appropriate.

Cc: Nick Piggin <npiggin@suse.de>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

Implement dynamic allocation for SLQB per-cpu and per-node arrays. This
should hopefully have minimal runtime performance impact, because although
there is an extra level of indirection to do allocations, the pointer should
be in the cache hot area of the struct kmem_cache.

It's not quite possible to use dynamic percpu allocator for this: firstly,
that subsystem uses the slab allocator. Secondly, it doesn't have good
support for per-node data. If those problems were improved, we could use it.
For now, just implement a very very simple allocator until the kmalloc
caches are up.

On x86-64 with a NUMA MAXCPUS config, sizes look like this:
   text    data     bss     dec     hex filename
  29960  259565     100  289625   46b59 mm/slab.o
  34130  497130     696  531956   81df4 mm/slub.o
  24575 1634267  111136 1769978  1b01fa mm/slqb.o
  24845   13959     712   39516    9a5c mm/slqb.o + this patch

SLQB is now 2 orders of magnitude smaller than it was, and an order of
magnitude smaller than SLAB or SLUB (in total size -- text size has
always been smaller). So it should now be very suitable for distro-type
configs in this respect.

As a side-effect the UP version of cpu_slab (which is embedded directly
in the kmem_cache struct) moves up to the hot cachelines, so it need no
longer be cacheline aligned on UP. The overall result should be a
reduction in cacheline footprint on UP kernels.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

Fix a problem where SLQB did not correctly return ZERO_SIZE_PTR for a
zero sized allocation.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

Introducing the SLQB slab allocator.

SLQB takes code and ideas from all other slab allocators in the tree.

The primary method for keeping lists of free objects within the allocator
is a singly-linked list, storing a pointer within the object memory itself
(or a small additional space in the case of RCU destroyed slabs). This is
like SLOB and SLUB, and opposed to SLAB, which uses arrays of objects, and
metadata. This reduces memory consumption and makes smaller sized objects
more realistic as there is less overhead.

Using lists rather than arrays can reduce the cacheline footprint. When moving
objects around, SLQB can move a list of objects from one CPU to another by
simply manipulating a head pointer, wheras SLAB needs to memcpy arrays. Some
SLAB per-CPU arrays can be up to 1K in size, which is a lot of cachelines that
can be touched during alloc/free. Newly freed objects tend to be cache hot,
and newly allocated ones tend to soon be touched anyway, so often there is
little cost to using metadata in the objects.

SLQB has a per-CPU LIFO freelist of objects like SLAB (but using lists rather
than arrays). Freed objects are returned to this freelist if they belong to
the node which our CPU belongs to. So objects allocated on one CPU can be
added to the freelist of another CPU on the same node. When LIFO freelists need
to be refilled or trimmed, SLQB takes or returns objects from a list of slabs.

SLQB has per-CPU lists of slabs (which use struct page as their metadata
including list head for this list). Each slab contains a singly-linked list of
objects that are free in that slab (free, and not on a LIFO freelist). Slabs
are freed as soon as all their objects are freed, and only allocated when there
are no slabs remaining. They are taken off this slab list when if there are no
free objects left. So the slab lists always only contain "partial" slabs; those
slabs which are not completely full and not completely empty. SLQB slabs can be
manipulated with no locking unlike other allocators which tend to use per-node
locks. As the number of threads per socket increases, this should help improve
the scalability of slab operations.

Freeing objects to remote slab lists first batches up the objects on the
freeing CPU, then moves them over at once to a list on the allocating CPU. The
allocating CPU will then notice those objects and pull them onto the end of its
freelist.  This remote freeing scheme is designed to minimise the number of
cross CPU cachelines touched, short of going to a "crossbar" arrangement like
SLAB has.  SLAB has "crossbars" of arrays of objects. That is,
NR_CPUS*MAX_NUMNODES type arrays, which can become very bloated in huge systems
(this could be hundreds of GBs for kmem caches for 4096 CPU, 1024 nodes
systems).

SLQB also has similar freelist, slablist structures per-node, which are
protected by a lock, and usable by any CPU in order to do node specific
allocations. These allocations tend not to be too frequent (short lived
allocations should be node local, long lived allocations should not be
too frequent).

There is a good overview and illustration of the design here:

http://lwn.net/Articles/311502/

By using LIFO freelists like SLAB, SLQB tries to be very page-size agnostic.
It tries very hard to use order-0 pages. This is good for both page allocator
fragmentation, and slab fragmentation.

SLQB initialistaion code attempts to be as simple and un-clever as possible.
There are no multiple phases where different things come up. There is no
weird self bootstrapping stuff. It just statically allocates the structures
required to create the slabs that allocate other slab structures.

SLQB uses much of the debugging infrastructure, and fine-grained sysfs
statistics from SLUB. There is also a Documentation/vm/slqbinfo.c, derived
from slabinfo.c, which can query the sysfs data.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>

Merge branch 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, e820: Guard against array overflowed in __e820_add_region()
  x86, setup: remove obsolete pre-Kconfig CONFIG_VIDEO_ variables

Merge branch 'x86-percpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-percpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, percpu: Collect hot percpu variables into one cacheline
  x86, percpu: Fix DECLARE/DEFINE_PER_CPU_PAGE_ALIGNED()
  x86, percpu: Add 'percpu_read_stable()' interface for cacheable accesses

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, highmem_32.c: Clean up comment
  x86, pgtable.h: Clean up types
  x86: Clean up dump_pagetable()

Merge branch 'x86-kbuild-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-kbuild-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Simplify the Makefile in a minor way through use of cc-ifversion

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-64: move clts into batch cpu state updates when preloading fpu
  x86-64: move unlazy_fpu() into lazy cpu state part of context switch
  x86-32: make sure clts is batched during context switch
  x86: split out core __math_state_restore

Merge branch 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Decrease the level of some NUMA messages to KERN_DEBUG

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (22 commits)
  x86: Fix code patching for paravirt-alternatives on 486
  x86, msr: change msr-reg.o to obj-y, and export its symbols
  x86: Use hard_smp_processor_id() to get apic id for AMD K8 cpus
  x86, sched: Workaround broken sched domain creation for AMD Magny-Cours
  x86, mcheck: Use correct cpumask for shared bank4
  x86, cacheinfo: Fixup L3 cache information for AMD multi-node processors
  x86: Fix CPU llc_shared_map information for AMD Magny-Cours
  x86, msr: Fix msr-reg.S compilation with gas 2.16.1, on 32-bit too
  x86: Move kernel_fpu_using to irq_fpu_usable in asm/i387.h
  x86, msr: fix msr-reg.S compilation with gas 2.16.1
  x86, msr: Export the register-setting MSR functions via /dev/*/msr
  x86, msr: Create _on_cpu helpers for {rw,wr}msr_safe_regs()
  x86, msr: Have the _safe MSR functions return -EIO, not -EFAULT
  x86, msr: CFI annotations, cleanups for msr-reg.S
  x86, asm: Make _ASM_EXTABLE() usable from assembly code
  x86, asm: Add 32-bit versions of the combined CFI macros
  x86, AMD: Disable wrongly set X86_FEATURE_LAHF_LM CPUID bit
  x86, msr: Rewrite AMD rd/wrmsr variants
  x86, msr: Add rd/wrmsr interfaces with preset registers
  x86: add specific support for Intel Atom architecture
  ...

Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Make memtype_seq_ops const
  x86: uv: Clean up uv_ptc_init(), use proc_create()
  x86: Use printk_once()
  x86/cpu: Clean up various files a bit
  x86: Remove duplicated #include
  x86, ipi: Clean up safe_smp_processor_id() by using the cpu_has_apic() macro helper
  x86: Clean up idt_descr and idt_tableby using NR_VECTORS instead of hardcoded number
  x86: Further clean up of mtrr/generic.c
  x86: Clean up mtrr/main.c
  x86: Clean up mtrr/state.c
  x86: Clean up mtrr/mtrr.h
  x86: Clean up mtrr/if.c
  x86: Clean up mtrr/generic.c
  x86: Clean up mtrr/cyrix.c
  x86: Clean up mtrr/cleanup.c
  x86: Clean up mtrr/centaur.c
  x86: Clean up mtrr/amd.c:
  x86: ds.c fix invalid assignment

Merge branch 'x86-asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: remove all now-duplicate header files
  x86: convert termios.h to the asm-generic version
  x86: convert almost generic headers to asm-generic version
  x86: convert trivial headers to asm-generic version
  x86: add copies of some headers to convert to asm-generic

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/i386: Put aligned stack-canary in percpu shared_aligned section
  x86/i386: Make sure stack-protector segment base is cache aligned
  x86: Detect stack protector for i386 builds on x86_64
  x86: allow "=rm" in native_save_fl()
  x86: properly annotate alternatives.c
  x86: Introduce GDT_ENTRY_INIT(), initialize bad_bios_desc statically
  x86, 32-bit: Use generic sys_pipe()
  x86: Introduce GDT_ENTRY_INIT(), fix APM
  x86: Introduce GDT_ENTRY_INIT()
  x86: Introduce set_desc_base() and set_desc_limit()
  x86: Remove unused patch_espfix_desc()
  x86: Use get_desc_base()

Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
  ACPI, x86: expose some IO-APIC routines when CONFIG_ACPI=n
  x86, apic: Slim down stack usage in early_init_lapic_mapping()
  x86, ioapic: Get rid of needless check and simplify ioapic_setup_resources()
  x86, ioapic: Define IO_APIC_DEFAULT_PHYS_BASE constant
  x86: Fix x86_model test in es7000_apic_is_cluster()
  x86, apic: Move dmar_table_init() out of enable_IR()
  x86, ioapic: Panic on irq-pin binding only if needed
  x86/apic: Enable x2APIC without interrupt remapping under KVM
  x86, apic: Drop redundant bit assignment
  x86, ioapic: Throw BUG instead of NULL dereference
  x86, ioapic: Introduce for_each_irq_pin() helper
  x86: Remove superfluous NULL pointer check in destroy_irq()
  x86/ioapic.c: unify ioapic_retrigger_irq()
  x86/ioapic.c: convert __target_IO_APIC_irq to conventional for() loop
  x86/ioapic.c: clean up replace_pin_at_irq_node logic and comments
  x86/ioapic.c: convert replace_pin_at_irq_node to conventional for() loop
  x86/ioapic.c: simplify add_pin_to_irq_node()
  x86/ioapic.c: convert io_apic_level_ack_pending loop to normal for() loop
  x86/ioapic.c: move lost comment to what seems like appropriate place
  x86/ioapic.c: remove redundant declaration of irq_pin_list
  ...

* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (87 commits)
  NFSv4: Disallow 'mount -t nfs4 -overs=2' and 'mount -t nfs4 -overs=3'
  NFS: Allow the "nfs" file system type to support NFSv4
  NFS: Move details of nfs4_get_sb() to a helper
  NFS: Refactor NFSv4 text-based mount option validation
  NFS: Mount option parser should detect missing "port="
  NFS: out of date comment regarding O_EXCL above nfs3_proc_create()
  NFS: Handle a zero-length auth flavor list
  SUNRPC: Ensure that sunrpc gets initialised before nfs, lockd, etc...
  nfs: fix compile error in rpc_pipefs.h
  nfs: Remove reference to generic_osync_inode from a comment
  SUNRPC: cache must take a reference to the cache detail's module on open()
  NFS: Use the DNS resolver in the mount code.
  NFS: Add a dns resolver for use with NFSv4 referrals and migration
  SUNRPC: Fix a typo in cache_pipefs_files
  nfs: nfs4xdr: optimize low level decoding
  nfs: nfs4xdr: get rid of READ_BUF
  nfs: nfs4xdr: simplify decode_exchange_id by reusing decode_opaque_inline
  nfs: nfs4xdr: get rid of COPYMEM
  nfs: nfs4xdr: introduce decode_sessionid helper
  nfs: nfs4xdr: introduce decode_verifier helper
  ...