The pinmux management is tied in to this code, while it is presently only
used by platforms that select GENERIC_GPIO. The asm/gpio.h definitions
are not referenced when GENERIC_GPIO is disabled, resulting in a build
failure for all of the platforms that don't select it.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

SH7723 has two types of SCIF (SCIF and SCIFA).
The current sh-sci driver supports only SCIFA, and calculation methods of SCBRR
are different.
This patch support this methods.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Add platform data flags for detailed lcd display configuration.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Remove lddckr from the platform data, these days we calculate the
register value from clock source and clock dividers anyway.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Remove left overs from the generic declared coherent rework.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Add support for dynamic crash kernel base address.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Improve Migo-R ethernet performance by reducing smc91x overruns.
This is done by enabling SMC91X_NOWAIT and optimizing CS4 setup.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Conflicts:

	Documentation/kernel-parameters.txt
	arch/sh/include/asm/elf.h

debugfs_create_file() returns NULL if an error occurs, returns -ENODEV
when debugfs is not enabled in the kernel.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

debugfs_create_dir() returns NULL if an error occurs, returns -ENODEV
when debugfs is not enabled in the kernel.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Renesas AP325RXA board has Epson RX-8564LC of RTC.
This patch supports RTC of this board.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch hooks up the magicpanelr2 board with the sh7720 pinmux code.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch adds pinmux and gpio support for the sh7720 processor.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Make the rsk7203 board use the newly added sh7203 pinmux code.
Only a single LED plus the serial console pins for now.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch adds pinmux and gpio support for the sh7203 processor.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch enables the GPIO code on AP325RXA and converts the code from
register based pinmux configuration to GPIO based pin by pin setup.
While at it 2 LEDs and one switch are added and exported to user space.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch adds pinmux and gpio support for the sh7723 processor.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch enables the GPIO code on Migo-R and converts the code from
register based pinmux configuration to GPIO based pin by pin setup.
Fix whitespace damage while at it and add 2 LEDs and export them to
user space.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch adds pinmux and gpio support for the sh7722 processor.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch adds gpio code together with the pinmux table parser.
In the future we should optimize this and switch back to gpiolib.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (94 commits)
  USB: remove err() macro from more usb drivers
  USB: remove err() macro from usb misc drivers
  USB: remove err() macro from usb core code
  USB: remove err() macro from usb class drivers
  USB: remove use of err() in drivers/usb/serial
  USB: remove info() macro from usb mtd drivers
  USB: remove info() macro from usb input drivers
  USB: remove info() macro from usb network drivers
  USB: remove info() macro from remaining usb drivers
  USB: remove info() macro from usb/misc drivers
  USB: remove info() macro from usb/serial drivers
  USB: remove warn macro from HID core
  USB: remove warn() macro from usb drivers
  USB: remove warn() macro from usb net drivers
  USB: remove warn() macro from usb media drivers
  USB: remove warn() macro from usb input drivers
  usb/fsl_qe_udc: clear data toggle on clear halt request
  usb/fsl_qe_udc: fix response to get status request
  fsl_usb2_udc: Fix oops on probe failure.
  fsl_usb2_udc: Add a wmb before priming endpoint.
  ...

* 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (44 commits)
  drm/i915: fix ioremap of a user address for non-root (CVE-2008-3831)
  drm: make CONFIG_DRM depend on CONFIG_SHMEM.
  radeon: fix PCI bus mastering support enables.
  radeon: add RS400 family support.
  drm/radeon: add support for RS740 IGP chipsets.
  i915: GM45 has GM965-style MCH setup.
  i915: Don't run retire work handler while suspended
  i915: Map status page cached for chips with GTT-based HWS location.
  i915: Fix up ring initialization to cover G45 oddities
  i915: Use non-reserved status page index for breadcrumb
  drm: Increment dev_priv->irq_received so i915_gem_interrupts count works.
  drm: kill drm_device->irq
  drm: wbinvd is cache coherent.
  i915: add missing return in error path.
  i915: fixup permissions on gem ioctls.
  drm: Clean up many sparse warnings in i915.
  drm: Use ioremap_wc in i915_driver instead of ioremap, since we always want WC.
  drm: G33-class hardware has a newer 965-style MCH (no DCC register).
  drm: Avoid oops in GEM execbuffers with bad arguments.
  DRM: Return -EBADF on bad object in flink, and return curent name if it exists.
  ...

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (95 commits)
  V4L/DVB (9296): Patch to remove warning message during cx88-dvb compilation
  V4L/DVB (9294): gspca: Add a stop sequence in t613.
  V4L/DVB (9293): gspca: Separate and fix the sensor dependant sequences in t613.
  V4L/DVB (9292): gspca: Call the control setting functions at init time in t613.
  V4L/DVB (9291): gspca: Do not set the white balance temperature by default in t613.
  V4L/DVB (9290): gspca: Adjust the sensor init sequences in t613.
  V4L/DVB (9289): gspca: Other sensor identified as om6802 in t613.
  V4L/DVB (9288): gspca: Write to the USB device and not USB interface in t613.
  V4L/DVB (9287): gspca: Change the name of the multi bytes write function in t613.
  V4L/DVB (9286): gspca: Compilation problem of gspca.c and the kernel version.
  V4L/DVB (9283): Correct typo and enable setting the gain on the mt9m111 sensor
  V4L/DVB (9282): Properly iterate the urbs when destroying them.
  V4L/DVB (9281): gspca: Add hflip and vflip to the po1030 sensor
  V4L/DVB (9280): gspca: Use the gspca debug macros
  V4L/DVB (9279): gspca: Correct some copyright headers
  V4L/DVB (9278): gspca: Remove the m5602_debug variable
  V4L/DVB (9277): gspca: propagate an error in m5602_start_transfer()
  V4L/DVB (9276): videobuf-dvb: two functions are now static
  V4L/DVB (9275): dvb: input data pointer of cx24116_writeregN() should be const
  V4L/DVB (9274): Remove spurious messages and turn into debug.
  ...

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Remove automatic enabling of the HUGE_FILE feature flag
  ext4: Replace hackish ext4_mb_poll_new_transaction with commit callback
  ext4: Update Documentation/filesystems/ext4.txt
  ext4: Remove unused mount options: nomballoc, mballoc, nocheck
  ext4: Remove compile warnings when building w/o CONFIG_PROC_FS
  ext4: Add missing newlines to printk messages
  ext4: Fix file fragmentation during large file write.
  vfs: Add no_nrwrite_index_update writeback control flag
  vfs: Remove the range_cont writeback mode.
  ext4: Use tag dirty lookup during mpage_da_submit_io
  ext4: let the block device know when unused blocks can be discarded
  ext4: Don't reuse released data blocks until transaction commits
  ext4: Use an rbtree for tracking blocks freed during transaction.
  ext4: Do mballoc init before doing filesystem recovery
  ext4: Free ext4_prealloc_space using kmem_cache_free
  ext4: Fix Kconfig typo for ext4dev
  ext4: Remove an old reference to ext4dev in Makefile comment

USB should not be having it's own printk macros, so remove err() and
use the system-wide standard of dev_err() wherever possible.  In the
few places that will not work out, use a basic printk().
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove err() and
use the system-wide standard of dev_err() wherever possible.  In the
few places that will not work out, use a basic printk().
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove err() and
use the system-wide standard of dev_err() wherever possible.  In the
few places that will not work out, use a basic printk().
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove err() and
use the system-wide standard of dev_err() wherever possible.  In the
few places that will not work out, use a basic printk().
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

err() is going away, so switch to dev_err() or printk() if it's really
needed.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.  In the
few places that will not work out, use a basic printk().

Clean up the remaining usages of this in the drivers/usb/ directory.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

There were two stragglers that got missed in the last merge of the HID tree that forgot to change the warn() calls to dev_warn().  This patch fixes them up.
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>