- 09 Jan, 2006 40 commits
-
-
Adrian Bunk authored
If MODE_TT=n, MODE_SKAS must be y. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Jeff Dike authored
This fixes some mangled whitespace added by the earlier trap_user.c patch. Signed-off-by:
-
Jeff Dike authored
Most of the architectures have the same asm/futex.h. This consolidates them into asm-generic, with the arches including it from their own asm/futex.h. In the case of UML, this reverts the old broken futex.h and goes back to using the same one as almost everyone else. Signed-off-by:
-
Gennady Sharapov authored
The serial UML OS-abstraction layer patch (um/kernel dir). This joins trap_user.c and trap_kernel.c files. Signed-off-by:
Gennady Sharapov <Gennady.V.Sharapov@intel.com> Signed-off-by:
-
Gennady Sharapov authored
The serial UML OS-abstraction layer patch (um/kernel dir). This moves all systemcalls from trap_user.c file under os-Linux dir Signed-off-by:
-
Gennady Sharapov authored
The serial UML OS-abstraction layer patch (um/kernel dir). This moves all systemcalls from signal_user.c file under os-Linux dir Signed-off-by:
-
Woody Suwalski authored
ds1620 module is using gpio_read symbol, so works only if "built-in" symbol needs to be exported from the kernel image Signed-off-by:
Woody Suwalski <woodys@xandros.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Ravikiran G Thirumalai authored
Kill L1_CACHE_SHIFT from all arches. Since L1_CACHE_SHIFT_MAX is not used anymore with the introduction of INTERNODE_CACHE, kill L1_CACHE_SHIFT_MAX. Signed-off-by:
Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by:
Shai Fultheim <shai@scalex86.org> Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Ravikiran G Thirumalai authored
____cacheline_maxaligned_in_smp is currently used to align critical structures and avoid false sharing. It uses per-arch L1_CACHE_SHIFT_MAX and people find L1_CACHE_SHIFT_MAX useless. However, we have been using ____cacheline_maxaligned_in_smp to align structures on the internode cacheline size. As per Andi's suggestion, following patch kills ____cacheline_maxaligned_in_smp and introduces INTERNODE_CACHE_SHIFT, which defaults to L1_CACHE_SHIFT for all arches. Arches needing L3/Internode cacheline alignment can define INTERNODE_CACHE_SHIFT in the arch asm/cache.h. Patch replaces ____cacheline_maxaligned_in_smp with ____cacheline_internodealigned_in_smp With this patch, L1_CACHE_SHIFT_MAX can be killed Signed-off-by:
-
David Howells authored
Fix an uninitialised variable warning in the serverworks driver. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
Fix an uninitialised variable warning in the atm nicstar driver. Signed-off-by:
-
David Howells authored
Fix a number of miscellanous items: (1) Declare lock sections in the linker script. (2) Recurse in the correct manner in the arch makefile. (3) asm/bug.h requires asm/linkage.h to be included first. One C file puts asm/bug.h first. (4) Add an empty RTC header file to avoid missing header file errors. (5) sg_dma_address() should use the dma_address member of a scatter list. (6) Add trivial pci_unmap support. (7) Add pgprot_noncached() (8) Discard u_quad_t. (9) Use ~0UL rather than ULONG_MAX in unistd.h in case the latter isn't declared. (10) Add an empty VGA header file to avoid missing header file errors. (11) Add an XOR header file to use the generic XOR stuff. Signed-off-by: -
David Howells authored
Make the get_user macro cast the source pointer to an appropriate type for the specified size. Signed-off-by:
-
David Howells authored
Force the 8230 serial driver to be built in if the on-CPU UARTs are to be used. It can't be used as a module because the arch setup needs to call into it. Signed-off-by:
-
David Howells authored
Fix PCMCIA configuration for FRV by including the stock PCMCIA configuration description file. Signed-off-by:
-
David Howells authored
Implement pci_iomap() for FRV. Signed-off-by:
-
David Howells authored
Add stubs for FRV module support. Signed-off-by:
-
David Howells authored
Supply various I/O access primitives that are missing for the FRV arch: (*) mmiowb() (*) read*_relaxed() (*) ioport_*map() (*) ioread*(), iowrite*(), ioread*_rep() and iowrite*_rep() (*) pci_io*map() (*) check_signature() The patch also makes __is_PCI_addr() more efficient. Signed-off-by:
-
David Howells authored
Fix the exception table handling so that modules exceptions are dealt with. Signed-off-by:
-
David Howells authored
Export a number of features required to build all the modules. It also implements the following simple features: (*) csum_partial_copy_from_user() for MMU as well as no-MMU. (*) __ucmpdi2(). so that they can be exported too. Signed-off-by:
-
David Howells authored
Drop support for debugging features that aren't supported on FRV: (*) EARLY_PRINTK The on-chip UARTs are set up early enough that this isn't required, and VGA support isn't available. There's also a gdbstub available. (*) DEBUG_PAGEALLOC This can't be easily be done since we use huge static mappings to cover the kernel, not pages. Signed-off-by:
-
David Howells authored
Drop support for 8-bit and 16-bit xchg and cmpxchg emulation and implements 32-bit xchg with the SWAP/SWAPI instruction. Signed-off-by:
-
David Howells authored
Suppress configuration of certain features for the FRV arch as they can't be built for FRV at the moment: (*) RTC (*) HISAX_* (*) PARPORT_PC (*) VGA_CONSOLE (*) BINFMT_ELF Signed-off-by:
-
Lennert Buytenhek authored
The Kconfig symbol for pnx0105 was recently renamed to ARCH_PNX010X. Signed-off-by:
Lennert Buytenhek <buytenh@wantstofly.org> Cc: dmitry pervushin <dpervushin@ru.mvista.com> Cc: <dsaxena@plexity.net> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
-
Lennert Buytenhek authored
PNX010X support for CS89x0 should be conditional on NET_PCI, as it is an 'on board controller' and NET_PCI includes that category of NICs. Since ARCH_PNX0105 was recently changed to ARCH_PNX010X, incorporate that change as well while we're at it. Signed-off-by:
-
Lennert Buytenhek authored
Implement readwords/writewords that use readword/writeword, and switch the rest of the driver over to use these. Signed-off-by:
-
Lennert Buytenhek authored
Implement suitable versions of the readword/writeword macros for ixdp2x01 and pnx0501. Handle the 32-bit spacing of the registers in these functions instead of in the header file. Signed-off-by:
-
Lennert Buytenhek authored
Make readreg/writereg use readword/writeword. Signed-off-by:
-
Lennert Buytenhek authored
Reverse the order of readreg/writereg and readword/writeword in the file, so that we can make readreg/writereg use readword/writeword. Signed-off-by:
-
Lennert Buytenhek authored
Switch all occurences of inw/outw in the driver over to readword/writeword. Signed-off-by:
-
Lennert Buytenhek authored
readword() and writeword() take a 'struct net_device *' and deref its ->base_addr member. Make them take the base_addr directly instead, so that we can switch the other occurences of inw/outw in the file over to readword/writeword as well. Signed-off-by:
-
Kirill Korotaev authored
When oom_killer kills current there's no need to call schedule_timeout_interruptible() since task must die ASAP. Signed-Off-By:
Pavel Emelianov <xemul@sw.ru> Signed-Off-By:
Kirill Korotaev <dev@openvz.org> Signed-off-by:
-
Christoph Lameter authored
Group page migration functions in mempolicy.c Add a forward declaration for migrate_page_add (like gather_stats()) and use our new found mobility to group all page migration related function around do_migrate_pages(). Signed-off-by:
Christoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by:
-
Christoph Lameter authored
Since the numa_maps functionality is now in mempolicy.c we no longer need to export get_vma_policy(). Signed-off-by:
-
Christoph Lameter authored
migrate_page_add cannot be called with a spinlock held (calls isolate_lru_page which calles schedule_on_each_cpu). Drop ptl lock in check_pte_range before calling migrate_page_add(). Signed-off-by:
-
Christoph Lameter authored
First discussed at http://marc.theaimsgroup.com/?t=113149255100001&r=1&w=2 - Use the check_range() in mempolicy.c to gather statistics. - Improve the numa_maps code in general and fix some comments. Signed-off-by:
-
Christoph Lameter authored
This was was first posted at http://marc.theaimsgroup.com/?l=linux-mm&m=113149240227584&w=2 (Part of this functionality is also contained in the direct migration pathset. The functionality here is more generic and independent of that patchset.) - Add internal flags MPOL_MF_INVERT to control check_range() behavior. - Replace the pagelist passed through by check_range by a general private pointer that may be used for other purposes. (The following patches will use that to merge numa_maps into mempolicy.c and to better group the page migration code in the policy layer) - Improve some comments. Signed-off-by:
-
Dave Jones authored
We seem to be hitting this assertion failure too often for it to be hardware bugs. Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Tobias Klauser authored
Clean up a local variable with the same name as a variable in a larger block. Also move a variable into the block where it's actually used. Spotted by http://linuxicc.sourceforge.net/Signed-off-by:
Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by:
-
Avishay Traeger authored
Fix set_page_count() macro to handle complex arguments. Signed-off-by:
Avishay Traeger <atraeger@cs.sunysb.edu> Signed-off-by:
-
