- 28 Apr, 2009 10 commits
-
-
Chuck Lever authored
Clean up. A couple of years ago, a series of commits, finishing with commit 5680c446, swapped the order of the lockd_up() and svc_addsock() calls in __write_ports(). At that time lockd_up() needed to know the transport protocol of the passed-in socket to start a listener on the same transport protocol. These days, lockd_up() doesn't take a protocol argument; it always starts both a UDP and TCP listener. It's now more straightforward to try the lockd_up() first, then do a lockd_down() if the svc_addsock() fails. Careful review of this code shows that the svc_sock_names() call is used only to close the just-opened socket in case lockd_up() fails. So it is no longer needed if lockd_up() is done first. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Chuck Lever authored
Clean up: Refactor transport name listing out of __write_ports() to make it easier to understand and maintain. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Chuck Lever authored
User space must call listen(3) on SOCK_STREAM sockets passed into /proc/fs/nfsd/portlist, otherwise that listener is ignored. Document this. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Chuck Lever authored
Clean up: Refactor the socket creation logic out of __write_ports() to make it easier to understand and maintain. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Chuck Lever authored
Clean up: Refactor the socket closing logic out of __write_ports() to make it easier to understand and maintain. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Chuck Lever authored
Clean up: Refactor transport addition out of __write_ports() to make it easier to understand and maintain. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Chuck Lever authored
Clean up: Refactor transport removal out of __write_ports() to make it easier to understand and maintain. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Chuck Lever authored
The svc_addr_len() helper function returns -EAFNOSUPPORT if it doesn't recognize the address family of the passed-in socket address. However, the return type of this function is size_t, which means -EAFNOSUPPORT is turned into a very large positive value in this case. The check in svc_udp_recvfrom() to see if the return value is less than zero therefore won't work at all. Additionally, handle_connect_req() passes this value directly to memset(). This could cause memset() to clobber a large chunk of memory if svc_addr_len() has returned an error. Currently the address family of these addresses, however, is known to be supported long before handle_connect_req() is called, so this isn't a real risk. Change the error return value of svc_addr_len() to zero, which fits in the range of size_t, and is safer to pass to memset() directly. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
H Hartley Sweeten authored
Fix the following sparse warnings in net/sunrpc/svc_xprt.c. warning: symbol 'svc_recv' was not declared. Should it be static? warning: symbol 'svc_drop' was not declared. Should it be static? warning: symbol 'svc_send' was not declared. Should it be static? warning: symbol 'svc_close_all' was not declared. Should it be static? Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Benny Halevy authored
Signed-off-by: Benny Halevy <bhalevy@panasas.com> Cc: James Lentini <jlentini@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
- 24 Apr, 2009 2 commits
-
-
Bian Naimeng authored
If we encode the time of client creation into the stateid instead of the time of server boot, then we can determine whether that stateid is from a previous instance of the a server, or from a client that has expired, and return an appropriate error to the client. Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Felix Blyakher authored
For every lock request lockd creates a new file_lock object in nlmsvc_setgrantargs() by copying the passed in file_lock with locks_copy_lock(). A filesystem can attach it's own lock_operations vector to the file_lock. It has to be cleaned up at the end of the file_lock's life. However, lockd doesn't do it today, yet it asserts in nlmclnt_release_lockargs() that the per-filesystem state is clean. This patch fixes it by exporting locks_release_private() and adding it to nlmsvc_freegrantargs(), to be symmetrical to creating a file_lock in nlmsvc_setgrantargs(). Signed-off-by: Felix Blyakher <felixb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
- 23 Apr, 2009 1 commit
-
-
Roel Kluin authored
Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
- 22 Apr, 2009 5 commits
-
-
Linus Torvalds authored
-
Arjan van de Ven authored
There is currently only one way for userspace to say "wait for my storage device to get ready for the modules I just loaded": to load the scsi_wait_scan module. Expectations of userspace are that once this module is loaded, all the (storage) devices for which the drivers were loaded before the module load are present. Now, there are some issues with the implementation, and the async stuff got caught in the middle of this: The existing code only waits for the scsy async probing to finish, but it did not take into account at all that probing might not have begun yet. (Russell ran into this problem on his computer and the fix works for him) This patch fixes this more thoroughly than the previous "fix", which had some bad side effects (namely, for kernel code that wanted to wait for the scsi scan it would also do an async sync, which would deadlock if you did it from async context already.. there's a report about that on lkml): The patch makes the module first wait for all device driver probes, and then it will wait for the scsi parallel scan to finish. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jonathan Corbet authored
Fix a comment typo in slow-work.h ...a trivial mistake, but it will mess up kerneldoc if nothing else. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
Collect the DECLARE/DEFINE declarations together in linux/percpu-defs.h so that they're in one place, and give them descriptive comments, particularly the SHARED_ALIGNED variant. It would be nice to collect these in linux/percpu.h, but that's not possible without sorting out the severe #include recursion between the x86 arch headers and the general headers (and possibly other arches too). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
In non-SMP mode, the variable section attribute specified by DECLARE_PER_CPU() does not agree with that specified by DEFINE_PER_CPU(). This means that architectures that have a small data section references relative to a base register may throw up linkage errors due to too great a displacement between where the base register points and the per-CPU variable. On FRV, the .h declaration says that the variable is in the .sdata section, but the .c definition says it's actually in the .data section. The linker throws up the following errors: kernel/built-in.o: In function `release_task': kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o To fix this, DECLARE_PER_CPU() should simply apply the same section attribute as does DEFINE_PER_CPU(). However, this is made slightly more complex by virtue of the fact that there are several variants on DEFINE, so these need to be matched by variants on DECLARE. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 21 Apr, 2009 22 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: fix btrfs fallocate oops and deadlock Btrfs: use the right node in reada_for_balance Btrfs: fix oops on page->mapping->host during writepage Btrfs: add a priority queue to the async thread helpers Btrfs: use WRITE_SYNC for synchronous writes
-
git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds authored
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: go7007: Convert to the new i2c device binding model
-
Roel Kluin authored
`!' has a higher precedence than `&', parentheses are misplaced. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Sonic Zhang <sonic.zhang@analog.com> Cc: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
KOSAKI Motohiro authored
Commit a6dc60f8 ("vmscan: rename sc.may_swap to may_unmap") removed the may_swap flag, but memcg had used it as a flag for "we need to use swap?", as the name indicate. And in the current implementation, memcg cannot reclaim mapped file caches when mem+swap hits the limit. re-introduce may_swap flag and handle it at get_scan_ratio(). This patch doesn't influence any scan_control users other than memcg. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Jiang authored
Error found by Jeff Haran. The error detect register is 0s when no errors are detected. The check code is incorrect, so reverse check sense. Reported-by: Jeff Haran <jharan@Brocade.COM> Signed-off-by: Dave Jiang <djiang@mvista.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Eric Paris authored
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13133 ODEBUG: object is on stack, but not annotated ------------[ cut here ]------------ WARNING: at lib/debugobjects.c:253 __debug_object_init+0x1f3/0x276() Hardware name: VMware Virtual Platform Modules linked in: mptspi(+) mptscsih mptbase scsi_transport_spi ext3 jbd mbcache Pid: 540, comm: insmod Not tainted 2.6.28-mm1 #2 Call Trace: [<c042c51c>] warn_slowpath+0x74/0x8a [<c0469600>] ? start_critical_timing+0x96/0xb7 [<c060c8ea>] ? _spin_unlock_irqrestore+0x2f/0x3c [<c0446fad>] ? trace_hardirqs_off_caller+0x18/0xaf [<c044704f>] ? trace_hardirqs_off+0xb/0xd [<c060c8ea>] ? _spin_unlock_irqrestore+0x2f/0x3c [<c042cb84>] ? release_console_sem+0x1a5/0x1ad [<c05013e6>] __debug_object_init+0x1f3/0x276 [<c0501494>] debug_object_init+0x13/0x17 [<c0433c56>] init_timer+0x10/0x1a [<e08e5b54>] mpt_config+0x1c1/0x2b7 [mptbase] [<e08e3b82>] ? kmalloc+0x8/0xa [mptbase] [<e08e3b82>] ? kmalloc+0x8/0xa [mptbase] [<e08e6fa2>] mpt_do_ioc_recovery+0x950/0x1212 [mptbase] [<c04496c2>] ? __lock_acquire+0xa69/0xacc [<c060c8f1>] ? _spin_unlock_irqrestore+0x36/0x3c [<c060c3af>] ? _spin_unlock_irq+0x22/0x26 [<c04f2d8b>] ? string+0x2b/0x76 [<c04f310e>] ? vsnprintf+0x338/0x7b3 [<c04496c2>] ? __lock_acquire+0xa69/0xacc [<c060c8ea>] ? _spin_unlock_irqrestore+0x2f/0x3c [<c04496c2>] ? __lock_acquire+0xa69/0xacc [<c044897d>] ? debug_check_no_locks_freed+0xeb/0x105 [<c060c8f1>] ? _spin_unlock_irqrestore+0x36/0x3c [<c04488bc>] ? debug_check_no_locks_freed+0x2a/0x105 [<c0446b8c>] ? lock_release_holdtime+0x43/0x48 [<c043f742>] ? up_read+0x16/0x29 [<c05076f8>] ? pci_get_slot+0x66/0x72 [<e08e89ca>] mpt_attach+0x881/0x9b1 [mptbase] [<e091c8e5>] mptspi_probe+0x11/0x354 [mptspi] Noticing that every caller of mpt_config has its CONFIGPARMS struct declared on the stack and thus the &pCfg->timer is always on the stack I changed init_timer() to init_timer_on_stack() and it seems to have shut up..... Cc: "Moore, Eric Dean" <Eric.Moore@lsil.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: "Desai, Kashyap" <Kashyap.Desai@lsi.com> Cc: <stable@kernel.org> [2.6.29.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Robin Holt authored
For an upcoming distro release, we need to have the xp kernel module loadable even when not on UV equipment. The xpc module will not load. This will allow one set of modules dependent upon xp to work on either UV or non-UV equipment. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Jack Steiner <steiner@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
WANG Cong authored
Got this warning from Kconfig: boolean symbol INPUT tested for 'm'? test forced to 'n' because INPUT is tristate, not bool. Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
Insert PCI root bus resources for the FRV-based MB93090 development kit motherboard. This is required because the CPU's window onto the PCI bus address space is considerably smaller than the CPU's full address space and non-PCI devices lie outside of the PCI window that we might want to access. Without this patch, the PCI root bus uses the platform-level bus resources, and these are then confined to the PCI window, thus making platform_device_add() reject devices outside of this window. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Krzysztof Halasa authored
With no IRQ available/defined, RTC-CMOS driver prints something like: rtc0: alarms up to one no, y3k, 114 bytes nvram ^^^^ I guess the following is a bit easier to understand: rtc0: no alarms, y3k, 114 bytes nvram Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Brownell authored
This is a doc-only patch which I hope will reduce the number of spi_master controller driver patches starting out with a common implementation bug. (As in: almost every spi_master driver I see starts out with its version of this bug. Sigh.) It just re-emphasizes that the setup() method may be called for one device while a transfer is active on another ... which means that most driver implementations shouldn't touch any registers. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Robert P. J. Day authored
Add a parenthesized string of "H8300" for more convenient searchability in the MAINTAINERS file. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Matt Mackall authored
Impact: make more work for myself Signed-off-by: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Roel Kluin authored
On line 944 the return value of flush() is considered as a boolean, but limit reaches -1 upon timeout which evaluates to true. On 540, 594, 720 the same occurs for wait_ssp_rx_stall() On 536 the same occurs for wait_dma_channel_stop() Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Cc: David Brownell <david-b@pacbell.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
There are no more arches with suspend support using these directories. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Daniel Ribeiro authored
If DMA is enabled, any spi_sync call after suspend/resume would block forever, because DRCMR is lost on suspend. This patch restores DRCMR to the same values set by probe. Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Helge Deller authored
On parisc machines, which don't have HIL, removing the hp_sdc module panics the kernel. Fix this by returning early in hp_sdc_exit() if no HP SDC controller was found. Add functionality to probe for the hp_sdc_mlc kernel module (which takes care of the upper layer HIL functionality on parisc) after two seconds. This is needed to get all the other HIL drivers (keyboard / mouse/ ..) drivers automatically loaded by udev later as well. Signed-off-by: Helge Deller <deller@gmx.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Frans Pop <elendil@planet.nl> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
KAMEZAWA Hiroyuki authored
mm->owner should be accessed with rcu_dereference(). Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Akinobu Mita authored
This fixes the following BUG: # mount -o size=MM -t hugetlbfs none /huge hugetlbfs: Bad value 'MM' for mount option 'size=MM' ------------[ cut here ]------------ kernel BUG at fs/super.c:996! Due to BUG_ON(!mnt->mnt_sb); in vfs_kern_mount(). Also, remove unused #include <linux/quotaops.h> Cc: William Irwin <wli@holomorphy.com> Cc: <stable@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
dann frazier authored
Enable userspace to receive messages that a BMC transmits using an OEM medium. This is used by the HP iLO2. Based on code originally written by Patrick Schoeller. Signed-off-by: dann frazier <dannf@hp.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Corey Minyard authored
Bela Lubkin noticed that the statistics for send IPMB and LAN commands in the IPMI driver could be incremented even if an error occurred. Move the increments to the proper place to avoid this. Also add some statistics for retransmissions that failed, and some little helper functions to neaten up the code a little. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Bela Lubkin <blubkin@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-