- 16 Oct, 2007 40 commits
-
-
Takashi Iwai authored
Remove superfluous comment line (maybe a merge failure). Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jaroslav Kysela <perex@perex.cz>
-
Takashi Iwai authored
Reported by zhejiang <zhe.jiang@intel.com> 'I found that STAC_VOLKNOB hardwired the KNOB nid to 0x24. It is okay for stac9205 and stac927x. But the VolumeKnob nid of stac9220-9221 is 0x16.' Signed-off-by:
-
Jaroslav Kysela authored
Signed-off-by: -
Takashi Iwai authored
Fixed ALC262 fujitsu model to support Fujitsu Lifebook C1410 properly. It requires EAPD and has separate int/ext mic inputs (which was missing in the current driver). Signed-off-by:
Jaroslav Kysela <perex@suse.cz>
-
Clemens Ladisch authored
Since the last patch made the ENTER_UART command optional, the enter_uart option and its corresponding flag have become superfluous. The uart_enter option remains for backward compatibility but just prints a warning when used. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Clemens Ladisch authored
The original MPU-401 does not send an ACK byte after processing the ENTER_UART command, so we better do not try to wait for it. Many clones get this wrong and do send an ACK, but when interpreting it as MIDI, it is just a harmless Active Sensing message, and it is likely to be read and discarded by the interrupt handler before the MIDI input device is triggered. Signed-off-by:
-
Takashi Iwai authored
Shuttle AK31v2 works well with dxs_support=5 (ALSA bug#2926). Signed-off-by:
-
Takashi Iwai authored
My bad, I forgot to update the num_items field when added a new item to vaio_mux items table, so the last item 'PCM' disappeared. Now it has the right number 3. Signed-off-by:
-
Tim Gardner authored
Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
-
Takashi Iwai authored
Some dB level information is wrong in pcxhr driver according to the datasheet. Fixed now. Signed-off-by:
-
Takashi Iwai authored
Fix the output of Gateway laptops with STAC9200 codec chip. They require the EAPD control for some pins. These pins shouldn't be powered down. To enable EAPD control, a new model 'gateway' was added to STAC9200. The known PCI SSIDs are included in the quirk list. The fix was originally suggested by Brian Hinz, in ALSA bug#2948. Signed-off-by:
-
Takashi Iwai authored
Added zero checks in input-mux helper functions to avoid Oops. Some devices may have no input pins while the driver registers control elements calling these functions. Signed-off-by:
-
Mariusz Kozlowski authored
snd_register_device_for_dev() can oops when device_create() returns ERR_PTR(err). Scenario: preg->dev = device_create(...); /* fails */ if (preg->dev) /* contains ERR_PTR(err) */ dev_set_drvdata(preg->dev, private_data); and dev_set_drvdata() looks like this: static inline void dev_set_drvdata (struct device *dev, void *data) { dev->driver_data = data; <--- boom } This patch should prevent that. Signed-off-by:Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
James Courtier-Dutton authored
Signed-off-by:
James Courtier-Dutton <James@superbug.co.uk> Signed-off-by:
-
Andrew Morton authored
Signed-off-by:
-
Randy Dunlap authored
Fix hda help text typo. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Peer Chen authored
Add the MCP79 support to hda driver. The patch base on kernel 2.6.23-rc7 Signed-off-by:
Peer Chen <peerchen@gmail.com> Signed-off-by:
-
Takashi Iwai authored
Reading the signature of CS8427 over SPI/I2C fails on some devices by mysterious reason. In most cases, however, it succeeds at the sequential read. So, let's give a second chance to check the signature again. Signed-off-by:
-
Kailang Yang authored
Added the missing support for ASUS A7J [0x1043 0x1243] Signed-off-by:
Kailang Yang <kailang@realtek.com.tw> Signed-off-by:
-
Kailang Yang authored
* Fixed ALC662 init verbs (wrong NIDs) * Fixed ALC662 auto model issue (wrong DAC index) Signed-off-by:
-
Trent Piepho authored
The polling loop to check for ACI to go down was more convoluted than it needed to be. New loop should be more efficient and it is a lot simpler. The old loop checked for a timeout before checking for ACI down, which could result in an erroneous timeout. It's only a failure if the timeout expires _and_ ACI is still high. There is nothing wrong with the timeout expiring while the task is sleeping if ACI went low. A polling loop to check for the device to leaving INIT mode is removed. The device must have already left init for the previous ACI loop to have finished. Acked-by:
Rene Herman <rene.herman@gmail.com> Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Trent Piepho authored
Simplest fix. Acked-by:
-
Keita Maehara authored
These patches enable a few YMF743 controls (Tone/3D/IEC958) that won't be detected with the current version of ALSA. The second one contains following changes: - A chip-specific SPDIF support for YMF743 (It doesn't have AC97 standard SPDIF registers seen on YMF753). - The implementation for 'IEC958 Playback Source' and 'IEC958 Mute' are identical to the ones for YMF753. But there is no 'IEC958 Output Pin' for YMF743. Signed-off-by:
Keita Maehara <maehara@debian.org> Signed-off-by:
-
Keita Maehara authored
These patches enable some YMF743 controls (Tone/3D/IEC958) that won't be detected with the current version of ALSA. The first one contains only cosmetic changes to share a few YMF753-specific symbols with YMF743. Signed-off-by:
-
Rene Herman authored
Replace schedule_timeout() with schedule_timeout_uninterruptible() to avoid signals in loop. Signed-off-by:
-
Rene Herman authored
Fix schedule_timeout() use in alsa-kernel. Mostly just schedule_timeout(1) --> schedule_timeout_uninterruptible(1) The wavefront_synth one fixes the surrounding loop as well. In ymfpci_main, delete a superfluous set_current_state() and in soc/soc-dapm.c replace an _interruptible with _uninterruptible in some debug code; it's not waiting for signals. Signed-off-by: Rene Herman <rene.herman> Signed-off-by:
-
Matthew Ranostay authored
More laptop BIOS changes the subsystem id for STAC9205 cards if the microphone is toggled on/off in the settings. The patch removes the old STAC_9205_M43xx and use STAC_9205_DELL_M43. Signed-off-by:
Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by:
-
Takashi Iwai authored
Added the description about power-saving mode on AC97 and HD-audio drivers. Signed-off-by:
-
Takashi Iwai authored
Added CONFIG_SND_AC97_POWER_SAVE_DEFAULT and CONFIG_SND_HDA_POWER_SAVE_DEFAULT Kconfig options as the default values for power-saving mode of AC97 and HD-audio drivers, respectively. Signed-off-by:
-
Krzysztof Helt authored
This patch adds support for audio part of the Ensoniq SoundScape VIVO cards. The MIDI part is not supported. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Takashi Iwai authored
The OPTi ISA-PnP chips advertise their OPL4 base at 0x380 (to 0x3f0) through pnp and put their on-chip OPL3 at +8. The driver assumes the provided value is the ALBase (OPL3 address) though and checks for an OPL4 at -8, which means that simply adding 8 to the pnp provides value works to fix detection of both OPL3 and OPL4. Problem spotted on 931 and 933 by Krzysztof Helt and confirmed on 924 and 925 (together all OPTi ISA-PnP chips) by me. Signed-off-by; Rene Herman <rene.herman@gmail.com> Acked-by:
-
Takashi Iwai authored
Add descriptions for new module options of snd-sscape driver, wss_port and dma2. Signed-off-by:
-
Krzysztof Helt authored
This patch adds second DMA channel and WSS port settings to the sscape driver. Also, it adds internal card type setting. The Ensoniq SoundScape VIVO PnP id is added but not handled yet. Signed-off-by:
-
Daniel Mack authored
This patch adds support for Native Instrument's upcoming RigKontrol3 sound interface. Signed-off-by:
Daniel Mack <daniel@caiaq.de> Signed-off-by:
-
Krzysztof Helt authored
This patch zeroes buffer for the card name and fixes incorrect jump in the probe function. Signed-off-by:
-
Krzysztof Helt authored
This patch fixes MPU-401 irq values list in documentation. Signed-off-by:
-
Matthias Kaehlcke authored
Routines for effect processor FX8010: Use list_for_each_entry instead of list_for_each Signed-off-by:
Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by:
-
Matthias Kaehlcke authored
Intel HD Audio: Use list_for_each_entry(_safe) instead of list_for_each(_safe) Signed-off-by:
-
Matthias Kaehlcke authored
ESS Maestro 1/2/2E Sound Card: Use list_for_each_entry instead of list_for_each Signed-off-by:
-
Krzysztof Helt authored
This patch fixes ad1848_lib waiting loops to be the same as in the cs4231_lib. Acked-by:
-
