Skip to content

L
linux-davinci
Switch branch/tag
  1. 19 Sep, 2009 1 commit
  3. 25 Sep, 2009 2 commits
  5. 20 Aug, 2009 1 commit
  7. 04 Aug, 2009 2 commits
  9. 29 Jul, 2009 1 commit
  11. 25 Sep, 2009 1 commit
  13. 29 Jul, 2009 1 commit
  15. 25 Sep, 2009 1 commit
  17. 19 Sep, 2009 1 commit
  19. 11 Aug, 2009 1 commit
  21. 06 Oct, 2009 1 commit
    • Andrew Morton's avatar
      do_div() takes a u64. The mips build warns: · 069b4675
      Andrew Morton authored 
      In file included from include/trace/ftrace.h:635,
                 from include/trace/define_trace.h:61,
                 from include/trace/events/lockdep.h:96,
                 from kernel/lockdep.c:52:
include/trace/events/lockdep.h: In function `ftrace_raw_event_lock_acquired':
include/trace/events/lockdep.h:71: warning: comparison of distinct pointer types lacks a cast

from the check in include/asm-generic/div64.h:do_div().

Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      069b4675
  23. 16 Oct, 2009 1 commit
    • Stephen Boyd's avatar
      dmar_ir_support() references dmar_tbl which is annotated with · b8882458
      Stephen Boyd authored 
      __initdata. The only caller of dmar_ir_support() is
intr_remapping_supported() also annotated with __init.

WARNING: drivers/pci/built-in.o(.text+0xa110): Section mismatch in
reference from the function dmar_ir_support() to the variable
.init.data:dmar_tbl
The function dmar_ir_support() references
the variable __initdata dmar_tbl.
This is often because dmar_ir_support lacks a __initdata
annotation or the annotation of dmar_tbl is wrong.
Signed-off-by: default avatarStephen Boyd <bebarino@gmail.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      b8882458
  25. 14 Oct, 2009 1 commit
  27. 31 Oct, 2009 1 commit
  29. 30 Sep, 2009 1 commit
    • sonic zhang's avatar
      Fit blackfin uart over sport driver into common uart inftrastructure. It · 855d8f84
      sonic zhang authored 
      is based on the early platform interfaces to get the platform data early
when the console is initilized.

1. Enable sport uart driver to change uart baud, data bit, stop bit at
   runtime.  Bind the index of uart device nodes to physical index of
   sports.

2. Move all platform data into arch specific board files.  Register
   and probe platform device data in both early and normal stages.

3. Console is registered in sport uart driver as well.

4. Remove 500 us block waiting in sport tx stop code by putting a
   dummy data into tx fifo to make sure the sport tx stops when all bytes
   are shifted out except for the dummy data.

5. clean up a bit and fix up coding style.
Signed-off-by: default avatarSonic Zhang <sonic.zhang@analog.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Bryan Wu <cooloney@kernel.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      855d8f84
  31. 13 Jul, 2009 1 commit
  33. 25 Sep, 2009 2 commits
    • Lamarque Vieira Souza's avatar
      Work around one problem with my Acer Bluetooth Optical Rechargeable Mouse · 2f89b8bd
      Lamarque Vieira Souza authored 
      where the cursor gets stuck at screen's upper-left corner.

Even my notebook's touchpad is not able to move cursor when the bluetooth
mouse is connected to my Acer Ferrari 4005 notebook.

Using input session instead of hid session solves this problem although
the cursor still moves a little sluggishly with the bluetooth mouse,
cursor moves correctly using the touchpad.

My bluetooth mouse used to work well (no sluggish) until kernel 2.6.21,
since then the problems are getting worse with each kernel release (it got
sluggish in 2.6.22 and this this upper-left corner problem appeared in
2.6.28 or 2.6.27).

The patch adds a general quirk handling framework to the HIDP core and
then uses this framework to implement a quirk for this device.

[akpm@linux-foundation.org: use ARRAY_SIZE()-based search]
Signed-off-by: default avatarLamarque V. Souza <lamarque@gmail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Dave Young <hidave.darkstar@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      2f89b8bd
    • Sergei Shtylyov's avatar
      The driver wrongly claimed I/O ports at an address returned by pci_iomap() · 85d8c0b0
      Sergei Shtylyov authored 
      -- even if it was passed an MMIO address.  Fix this by claiming/releasing
all PCI resources in the PCI driver probe/remove handlers instead and get
rid of the must_free_region flag weirdness (why would Cardbus claim
anything for us?).

Also, the remove handler was trying to talk to the chip after having
disabled its address decoders (at least on x86) -- fix this and get rid of
useless VORTEX_PCI() calls.

While at it, fix some cases of the overly indented code...

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      85d8c0b0
  35. 14 Oct, 2009 1 commit
  37. 24 Aug, 2009 2 commits
  39. 17 Aug, 2009 1 commit
  41. 04 Aug, 2009 1 commit
  43. 24 Aug, 2009 1 commit
  45. 20 Aug, 2009 1 commit
    • Sudhakar Rajashekhara's avatar
      Implement memory accessor interface in the MTD layer which enables the · fdfaf855
      Sudhakar Rajashekhara authored 
      kernel to access flash data.

This patch adds two new members to the mtd_partition structure, a function
handler which will be called during setup of the partition and an argument
to be passed to this setup function.

Example:
+static struct mtd_partition spi_flash_partitions[] = {
+       [0] = {
+               .name       = "U-Boot",
+               .offset     = 0,
+               .size       = SZ_256K,
+               .mask_flags = MTD_WRITEABLE,
+       },
+       [1] = {
+               .name       = "U-Boot Environment",
+               .offset     = MTDPART_OFS_NXTBLK,
+               .size       = SZ_64K,
+               .mask_flags = MTD_WRITEABLE,
+       },
+       [2] = {
+               .name       = "Linux",
+               .offset     = MTDPART_OFS_NXTBLK,
+               .size       = SZ_7M,
+               .mask_flags = 0,
+       },
+       [3] = {
+               .name       = "MAC Address",
+               .offset     = MTDPART_OFS_NXTBLK,
+               .size       = SZ_64K,
+               .mask_flags = 0,
+               .setup      = davinci_get_mac_addr,
+               .context    = (void *)0,
+       },
+};

The davinci_get_mac_addr function reads the MAC address from
offset ZERO of last MTD partition.
Signed-off-by: default avatarSudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      fdfaf855
  47. 12 Oct, 2009 1 commit
    • Roland McGrath's avatar
      This adds CROSS_COMPILE as a kconfig string so you can store it in · 68134294
      Roland McGrath authored 
      .config.  Then you can use plain "make" in the configured kernel build
directory to do the right cross compilation without setting the
command-line or environment variable every time.

With this, you can set up different build directories for different kernel
configurations, whether native or cross-builds, and then use the simple:

	make -C /build/dir M=module-source-dir

idiom to build modules for any given target kernel, indicating which one
by nothing but the build directory chosen.

I tried a version that defaults the string with env="CROSS_COMPILE" so
that in a "make oldconfig" with CROSS_COMPILE in the environment you can
just hit return to store the way you're building it.  But the kconfig
prompt for strings doesn't give you any way to say you want an empty
string instead of the default, so I punted that.
Signed-off-by: default avatarRoland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      68134294
  49. 05 Sep, 2009 1 commit
  51. 25 Sep, 2009 1 commit
  53. 13 Oct, 2009 1 commit
  55. 12 Oct, 2009 1 commit
    • Henrik Rydberg's avatar
      With the recent system-wide improvements on suspend/resume and EFI booting · 9c2e137f
      Henrik Rydberg authored 
      the suspend_resume method of the bcm5974 has broken.  When waking up from
the S3 state on the MacBookAir, the trackpad is found in a yet unknown
state, unable to switch to the proper multitouch mode.  The result is a
frozen touchpad, and a flood of errors of the kind

bcm5974: bad trackpad package, length: 8.

This patch retracts the reset_resume method altogether, falling back on
the generic unbind/rebind functionality of the usb layer until further
investigations can be made as how to reset the device when booting from
efi.
Signed-off-by: default avatarHenrik Rydberg <rydberg@euromail.se>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      9c2e137f
  57. 29 Sep, 2009 1 commit
  59. 19 Sep, 2009 1 commit
  61. 02 Sep, 2009 1 commit
  63. 13 Oct, 2009 3 commits
    • Joakim Tjernlund's avatar
      The driver always ends a read with a STOP condition which breaks · 9f2e7ffc
      Joakim Tjernlund authored 
      subsequent I2C reads/writes in the same transaction as these expect to do
a repeated START(ReSTART).

This will also help I2C multimaster as the bus will not be released after
the first read, but when the whole transaction ends.
Signed-off-by: default avatarJoakim Tjernlund <Joakim.Tjernlund@transmode.se>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      9f2e7ffc
    • Alexander Strakh's avatar
      In driver ./drivers/media/video/usbvideo/quickcam_messenger.c in line 91: · 8b0a2547
      Alexander Strakh authored 
        91         usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname));

After this line we use strncat:

  92         strncat(cam->input_physname, "/input0", sizeof(cam->input_physname));

where sizeof(cam->input_physname) returns length of cam->input_phisname
without length for null-symbol.  But this parameter must be - "maximum
numbers of bytes to copy", i.e.:
sizeof(cam->input_physname)-strlen(cam->input_physname)-1.

In this case, after call to usb_make_path the similar drivers use strlcat.

Like in: drivers/hid/usbhid/hid-core.c:
1152         usb_make_path(dev, hid->phys, sizeof(hid->phys));
1153         strlcat(hid->phys, "/input", sizeof(hid->phys));

Found by Linux Driver Verification Project.

Use strlcat instead of strncat.
Signed-off-by: default avatarAlexander Strakh <strakh@ispras.ru>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      8b0a2547
    • Alexander Strakh's avatar
      In driver ./drivers/media/video/usbvideo/konicawc.c in line 227: · bfb9b035
      Alexander Strakh authored 
      227         usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname));

After this line we use strncat:

228         strncat(cam->input_physname, "/input0", sizeof(cam->input_physname));

where sizeof(cam->input_physname) returns length of cam->input_phisname
without length for null-symbol.  But this parameter must be - "maximum
numbers of bytes to copy", i.e.:
sizeof(cam->input_physname)-strlen(cam->input_physname)-1.

In this case, after call to usb_make_path the similar drivers use strlcat.

Like in drivers/hid/usbhid/hid-core.c:
1152         usb_make_path(dev, hid->phys, sizeof(hid->phys));
1153         strlcat(hid->phys, "/input", sizeof(hid->phys));

Found by Linux Driver Verification Project.

Use strlcat instead of strncat.
Signed-off-by: default avatarAlexander Strakh <strakh@ispras.ru>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      bfb9b035
  65. 30 Sep, 2009 1 commit
  67. 18 Aug, 2009 1 commit